Flesan peko Octopus-a nece da upali.

evo log:

Kod:
Platform: Samsung Android
Selected port: COM3
Selected model: SM-A300FU
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM3
Phone connection failed
Please put the phone into Download Mode and connect USB cable.
To put SM-A300FU into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on 
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing QSEE section...
QSEE section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.