Strana 1 od 5 12345 PoslednjiPoslednji
Prikazivanje rezultata 1 do 40 od 196

Tema: Objava Novih Verzija SETOOL-a !!!-v1.084

  1. #1
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova

    Objava Novih Verzija SETOOL-a !!!-v1.084

    U ovoj temi ce se objavljivati izlazak novih verzija SETOOL soft-a.

    Pozdrav!
    Izmenio DeDaMrAz : 25-02-10 u 08:45

  2. #2
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    GUI v0.91380017
    12 April 2006

    Sredjeno vise bug-ova !
    Minimalne promjene u funkcionalnosti software-a.


    http://setool.net/dist.rar

  3. #3
    Balkan GSM Team MACKIE's Avatar
    Clan br.
    11
    Registrovan
    Aug 2005
    Lokacija
    Prijepolje - Serbia N43o 23' 21.7'' E019o 38' 50.0''
    Godina
    41
    Br. postova
    333
    Hvala
    70
    Pohvaljen 55 puta u 12 postova

    New (v0.91380018) is out

    2006-04-24
    New card version of the standalone (v0.91380018) is out! Download it from the Downloads section.

    • change - added support (experimental) for red49 k750/w800 phones.
    • change - changed rest files behaviour . now, if "rest. file" edit is empty, program attempts to auto-search for version and auto-restore it from rest folder.
    • bugfix - probably fixed db2010 cid49 problems (w550, error "bootloader not responds")
    • change - changed EROMs for new db2010 models (to prevent phone death after change certificate)
    • bugfix - fixed other minor bugs.
    • bugfix - as usual, fighting with execryptor bugs (quits,crashes,etc)

    Pozdrav
    Mackie

  4. #4
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova

    Talking

    GUI v0.91380019

    - added, FIRST IN THE WORLD, complete support for red49 w810/z530.
    no-tp, of course. so. now setool first (as usual) supports all red49 phone line.

    - updated restoration files.

    http://setool.net/dist.rar


    flashes with most recent w810 and z530 is on support.

    note- if you damage your erom - that version will NOT help you for any red49 phone.


    a note to universaldongle - look at my work, steal it,use it - but know - you are always no.2 on scene.

    same applies to other developers, who NOT came with w810 no-tp until now.

  5. #5
    GSM Master MADCIRA's Avatar
    Clan br.
    9
    Registrovan
    Aug 2005
    Lokacija
    Kekenda (c) sebagsm
    Godina
    38
    Br. postova
    486
    Hvala
    49
    Pohvaljen 158 puta u 60 postova
    2006-05-04
    New card version of the standalone (v0.91380021) is out! Download it from the Downloads section.
    • change - updated rest files, added z530/w810/k750 gdfs in ssw format (frec folder)
    • critical bugfix - db2000 red49 phones unlock was broken, which resulted constant "5 locks". fixed.
    • bugfix - fixed issue with UFS "dummy battery" cable, which CAN bring to dead red49 phone (can only be resurrected by tp). probably that fix will brings more safe red49 operations.
    • bugfix - different not important issues

  6. #6
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    GUI v0.91380021

    - added read files functionality for z530/w810 phones. some speedup,heheh.

    - bugfixes (i not remember exact what i fix, maybe some ignition probs,maybe not)

    - raw z300 support added (read codes,flash,read flash, read/write nvram).
    latest flashfiles for z300 uploaded at support.
    please note.
    if you will write in yours z300 FULL readout from other z300 - it will go dead and only emma3 (at present) will resurrect it.
    if you will write in yours z300 NVRAM from other z300 - it will became zombie too.
    if you somehow manage to damage boot area (0x0++0x10000) - your phone is complete junk, can't be repaired NEVER. from my side, though, i done all possible so you CAN'T write boot.

    so, you have been warned.


    //////////////////////////////////////////////////////////////////////////////////////////////
    ps.
    z300 "idea" inspired by softmobile,who part of gti team.
    sorry,man, you took many of my work, my turn now.
    but nobody will tell that i'm silently steal things.

    lead, now you can uncomment #DEFINE Z300_GRABBED_FROM_MTBOX
    and please return back id strings in 810 prodloader,hehe... angel

    zulea, just fuck off and die.

    Ukratko Z300 unlock/repair/flash djelimicno ukraden od MT box-a... i doradjen naravno...mala nadonada za cid49 soluciju ukradenu od SETOOL-a od strane MT box-a...
    Sredjeni neki bag-ovi...ubrzan rad Z530 i W810 aparata...

  7. #7
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    GUI v0.91380023

    - readflash fixed
    - some very internal problem fixed, hopefully damned exists will disappear.
    - updated rest files
    - added w550 gdfs in ssw format


    download from support area.

  8. #8
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova

    Thumbs up

    GUI v0.91380024

    - added experimental support for j220/j230 phones. not tested (i have not phone ), but must work. i put only pair of flashes for test. after (not) successful tests will add all other.

    - fixed incorrect work of command "readpkg","readdir" when single root directory specified.

    - rest files package synched with current rest files

    Pozdrav!

  9. #9
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    2006-05-22
    Our Support area has been updated with K750 R1CA021 complete firmware pack*
    Thanks to Mukka for his help.
    * Always check support area and support forum, new flashes are appearing regularly.

    2006-05-17
    Our Support area has been updated with J230_R5J complete firmware pack*
    * Always check support area and support forum, new flashes are appearing regularly.

    2006-05-17
    New card version of the standalone (v0.91380027) is out! Download it from the Downloads section.
    change - finally j220/j230 fully working and tested (read codes/read flash/flash firmware)

    Pozdrav!

  10. #10
    Balkan GSM Team MACKIE's Avatar
    Clan br.
    11
    Registrovan
    Aug 2005
    Lokacija
    Prijepolje - Serbia N43o 23' 21.7'' E019o 38' 50.0''
    Godina
    41
    Br. postova
    333
    Hvala
    70
    Pohvaljen 55 puta u 12 postova

    New card version of the standalone (v0.91380029) is out!

    New card version of the standalone (v0.91380029) is out! Download it from the Downloads section.
    change - gui slightly changed, added CDA dropdown listbox. warning, cda list is saved when window closed (quit button)
    bugfix - on some systems "protection error" appears, while older versions work ok. must be fixed
    change - some low level tuning

    Pozdrav
    Mackie

  11. #11
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    GUI v0.91380030

    - there was a problem - if you checked "unlock after flash" and flash lg3g red41/42/54, after flash phone was dead (need to unlock with tp afterward). that issue was fixed , it works like designed now.

    - internal rebuilds, preparing for db2020 unlock and flash support.


    IMPORTANT INFORMATION

    SEMC, by error, released some number (BIG) of BROWN w700 with LOCKED OTP

    when flashing, that phones will produce such errors:


    Code:

    .......
    CSloader version:
    060118 0312 EMPCXC1327364_COMPACT_SEMC_CS_LOADER
    loader startup: executed
    wrong responce, break.
    loader filesystem startup failed, that is fatal


    YOU NEED TO FLASH SPECIAL EROM from eroms\w700red_erom.ssw.cry and AFTER flashing that erom repeat complete sequence.

    flashing any other EROMs will bring you to testpoint.

  12. #12
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova

    Thumbs up GUI v0.91380031

    - now you can really flash any CID flash file in any CID phone.
    - some bugfixes

    ps.
    i'm going to complete rewrite setool2 on normal compiler.
    prepare for many bugs and sone intresting features
    Pozdrav!

  13. #13
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    Da, da...
    Recimo bice 'nekih' iznenadjenja. )
    SETOOL korisnici...uzivajte...naravno, 029 verziju ne brisite, i u slucaju odredjenih bug-ova nju koristite...

    Lopovi, spremite se...

  14. #14
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Latest news:
    http://www.setool.net/support/download.php?id_file=2092

    v0.91380032

    2006-07-04
    Our Support area has been updated with SE firmware and customisation packs listed below:
    • D750 r1aa008,r1l002 firmwares and customization pack
    • z520 customization packs
    • k700 customization packs
    • s700 customization packs
    • k710 customization packs
    • z800 customization packs
    • v800 customization packs*
    * Always check support area and support forum, new flashes are appearing regularly.

    2006-07-02
    New complete low-level rewrited version of the standalone (v0.91380032) is out! Download it from the Downloads section.
    • change - packages now simple zip files( backward compability with .pkg not maintained,sorry). That allows to use original semc customization packs and easy maintain any OWN customization pack
    • change - fast imei patching added. works for all firmwares of semc,lg and sharp,which i have (and i have a lot of them).
    • change - direct flash patching of new firmware versions of 703/903 added.
    • change - empty board handling changed. now, all you need to do is on empty board tab - recovery with brown cid49 ,enter IMEI, select erom if needed, select gdfs_in_ssw_format and press flash. after it, phone will be usual phone and must be handled in semc tab.
    • change - my friend vasilius draw more user friendly GUI.
    • change - profiles now auto-load when model changed. models slightly separated.
    • change - connect ufs removed, now ufs simple another communication port
    • change - unicode support when reading and writing files.
    • change - MNC2/3 selectable support added in locks.
    • change - updated drivers for ufs and 4in1 cable.
    • bugfix - latest ufs cables for k750 has one uart only, they not work at high speed when completing phone. it must be fixed now.
    • bugfix - a lot of other minor and major bugfixes and changes.

    2006-07-02
    Our Support area has been updated with SE firmware listed below:
    • v802 specific firmware r1aa002
    • v600 firmware versions: R2AF001,R2BA019,R2K005,r2t002,r4ad004
    • j300 firmware r2ba010,r2bd001
    • z530 firmware R6BA030
    • langpacks for k310 firmware r4da044
    • w300 firmware versions r9a035,r9a036
    • k310 langpacks updated at support
    • k608i firmware r2ba019
    * Always check support area and support forum, new flashes are appearing regularly.

  15. #15
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova

    Wink

    GUI v0.91380035


    - added server-based db2020 model flashing and unlocking.
    - misc bugfixes
    - rest files updated, was some errors in k600 rest files.

    k610 r1cb001 firmware and customization packs uploaded at support
    k800 r1cb001 firmware and customization packs uploaded at support
    v630 r1ce001 firmware and customization packs uploaded at support

  16. #16
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    GUI v0.91380036

    - setool2 not working properly under dead os (win95/98/me) . fixed.
    - added "support" for nice tool of arash (simple put his exe in directory and press E)
    - red49 k600/k608/v600 support was broken. fixed.
    - some cosmetic low-level fixes

  17. #17
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    GUI v0.91380037

    - by mistake, phone repowered during complete, fixed.
    - profiles now saves settings separate for every model in every window.
    - some other ll test improvements...

    edit:
    accidently broken testpoint usage fixed, reuploaded. (gmt+3 21:32)

  18. #18
    GSM Guru slobans's Avatar
    Clan br.
    246
    Registrovan
    Oct 2005
    Lokacija
    novi sad
    Godina
    48
    Br. postova
    142
    Hvala
    23
    Pohvaljen 15 puta u 10 postova
    GUI v0.91380038

    - nested directory creation during package restore was broken, fixed.

    z550 firmwares and customization files updated.

  19. #19
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova

    Thumbs up GUI v0.91380039

    - SEMCsec released EROM updater for db2020.
    it can help with red blink and "gdfs startup error:29" on db2020 phones.
    it can't help to repair damaged security units.
    it only works on com/ufs cables.

    how to use - settings, set USE SERVER.
    semc tab - select phone model
    press recovery.

    erom must be upgraded and possible your problem solved.

    - some fixes in com cables and db2020 booting
    - card unblocking not works as intended, fixed.


    ps.
    @SEMCSEC:
    thx for message, as far as i know, i'm first who received messages in official SEMC loaders

    about 90% - well, you beat us with multiple RSA sign. but what you will do, when we got yours auth dongle? or one of intresting loaders ?
    gti already done it, that means it is leaked and that means we will get it too, in time

  20. #20
    GSM Potencijal Cavi r's Avatar
    Clan br.
    662
    Registrovan
    Jan 2006
    Lokacija
    serbia
    Godina
    42
    Br. postova
    52
    Hvala
    0
    Pohvaljen 0 puta u 0 postova

    GUI v0.91380040 Released

    GUI v0.91380040 Released
    GUI v0.91380040

    - protector update, now setool2 must co-exist with KAV
    - it has been found, that in Z530 EROM not HW protected.

    Because of that,possible to revive Z530 phones with damaged erom.
    How to do:

    on semc tab, select z530 in model list.
    press recovery.
    phone will be recovered and attempt will be made to repair EROM.
    most possible, you will need to reflash phone in order to get it fully working.

    warning. if you select z530 and will use recovery with k310/k510/w300/w810/z550 phone - you will receive dead brick. it is only usable for current breed of Z530 phones

  21. #21
    GSM Guru
    Clan br.
    457
    Registrovan
    Dec 2005
    Lokacija
    Sabac
    Godina
    54
    Br. postova
    230
    Hvala
    21
    Pohvaljen 31 puta u 16 postova

    GUI v0.91380041

    - added brown to red db2020 conversion.
    how to use.
    UNCHECK "USE SERVER"
    first, be sure your phone is cid49. (press identify and read "flash cid:49")
    if not, go to "Empty Fill" tab, select CID49, press recovery - phone will be brown cid49
    next, convert phone to red.
    select correct model, select correct conversion EROM
    (example - phone is k610, conversion EROM is eroms\k610_erom_cnv_brown2red.cry )
    press flash.
    your phone is read and ready to flash using credits system.
    ( because of obvious reasons filesystem read not supported for brown 2020,unlocking is not supported for brown 2020,well... only flashing possible )

    - profiles auto load at startup now
    - misc loaders updated
    - recovery procedure for z530 updated a bit.

    k790 r1ed001 firmware uploaded.
    k610 r1ed001 fimrware updated.

  22. #22
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    2006-09-19
    Our Support area has been updated with SE firmware and customisation packs listed below:
    k790 r1ed001 firmware uploaded
    k610 r1ed001 fimrware updated
    k750 r1db001 rest files added
    j220 R5N firmware uploaded
    J230 R5N firmware uploaded
    K750 R1DB001 firmware uploaded (very few lp released by SEMC so far)
    W700 R1DB001 firmware uploaded

  23. #23
    GSM Guru slobans's Avatar
    Clan br.
    246
    Registrovan
    Oct 2005
    Lokacija
    novi sad
    Godina
    48
    Br. postova
    142
    Hvala
    23
    Pohvaljen 15 puta u 10 postova
    GUI v0.91380042


    that is very beta, main target is support "new" flash chip in z300/j220/j230.
    "new flash symptom" was "empty" codes when reading and garbled flash readout, unabilty to flash.
    hopefully, all of that was fixed, but need checking. support was done blindly,so ... you have been warned.
    please, try "unlock" first, and only if it works try flash.
    "unlock" CAN NOT kill your phone
    once again, i have no response for dead phone - THAT IS TEST version.

    New feature is ".vkp" support. .vkp is patches, maded by different persons to tune your phone. those who need that patches know where to get them.
    Soon i will made a .vkp request thread here and will ask some famous patchers to visit that thread.
    Usage simple - put .vkp file in misc. edit and press write script.

    Sibley-based (w300/w810/k310/k510/z550) emptyboards support was flawed, fixed.
    as i remember - locks were incorrectly written, should be fixed.

    rest.rar updated with latest restoration files.

  24. #24
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    GUI v0.91380043

    - added usercode reset for db2020 phone.
    requires server credits.

    how to use - two way

    first way good when doing only usercode reset
    - check "use server".
    - select correct model
    - press unlock. usercode will be resetted to 0000

    second way good when flashing.

    - check "use server"
    - check "unlock after flash"
    - check "complete phone" if you need it
    - select correct model
    - press flash. phone will be flashed and user code will be resetted to 0000

  25. #25
    GSM Guru
    Clan br.
    56
    Registrovan
    Sep 2005
    Lokacija
    EX JUGA
    Godina
    50
    Br. postova
    218
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    GUI v0.91380044
    interim fixup release.
    - added support for z300/j220/j230 renesas flash (mfgid:1c)
    - script with files references now must correctly executing from any directory
    - simlock codes now random during unlocking
    - countless internal tunings/fixups/preparations.
    - new bugs, and i hope you help me to find them
    ps.
    in few days new tab will became active
    p.p.s.
    pls redownload version if you downloaded it earlier than 7.16 (GMT+3) - it was one big glitch because good old themida not like new code style

  26. #26
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    GUI v0.91380046

    interim fixup release.

    - cosmetic addons, like "unused" buttons disabled now when needed
    - CID change lower than original and color change if OTP locked prohibited.
    - critical bug fixed - on all sibley based phones, if you set "unlock after flash" and "complete phone" - gdfs startup was stalled. thx to vasilius for reporting and help in finding and eliminating bug.
    - added several gdfs in bin format.
    - other internal updates.
    - m600/w950 support will be ready really soon....

    ps.
    045 version has bug with unlock, need to sleep a little sorry.

  27. #27
    Balkan GSM Team DeDaMrAz's Avatar
    Clan br.
    189
    Registrovan
    Oct 2005
    Lokacija
    Valjevo
    Godina
    38
    Br. postova
    415
    Hvala
    29
    Pohvaljen 36 puta u 9 postova
    GUI v0.91380047

    interim fixup release.

    - critical bug fixed - on some db2020 phones (diff hw ???) flashing was terminating with "subblock NAK" error. should be fixed.
    - db2020 identify now displays all information about phone state.

  28. #28
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    GUI v0.91380049

    some stable ( ) release and some NEW features.

    - fixup for some db2020 mobiles booting (err:36 and so on)
    - fixup for some sibley-based (w300/k310/k510/w300/z550/w810) flash break

    - new feature. red cid49 phones (db2000/db2010) can now be flashed via USB with ENORMOUS FAST speed using usual dcu60 cable (or miniusb for k600/z800). FROM NOW NO ONE CAN SAY "my XXX box flashing faster than yours setool2" supported ONLY RED CID 49 PHONES.


    there is several restrictions.
    first.
    UNLOCK is working. BUT if yours gdfs is damaged (rewrited from other phone) - you REQUIRED to use com/ufs connections to repair security values.
    second.
    IMEI change not working because of same reason.
    third.
    EROM must be intact in order for USB flashing work.
    fourth.
    no more restriction.


    some timings:

    fullflash of w810 phone - 360 seconds. (about 700 by uart)
    fullflash of w900 phone - 733 seconds. (about 1400 by uart)

    great thx for irritating testing goes to : vasilius, lider, sebagsm

    ps.
    of course - that feature will be immediately copied by other stealers.
    fuck them. do your own or insert my copyrights.
    well. now you CAN NOT do "you own" - i was first and you are stealers

  29. #29
    Banned I Am Who I Am's Avatar
    Clan br.
    2638
    Registrovan
    Oct 2006
    Br. postova
    28
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    GUI v0.91380050

    - bugfix. somehow i broke completely red49 support for k750/z520 series. fixed. thx for reporting goes to vascoff.

  30. #30
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    GUI v0.91380054

    - K320 SERVER support added
    - FREE USERCODE READ added (press identify) - works for db2000/2010/db2012
    - misc. bugfixes
    - new bugs (hope not )

    K320 R4EA031 firmware and customization packs uploaded.

  31. #31
    GSM Guru
    Clan br.
    56
    Registrovan
    Sep 2005
    Lokacija
    EX JUGA
    Godina
    50
    Br. postova
    218
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    GUI v0.91380055

    - user lock was incorrectly displayed if digit numbers uneven. fixed
    - lg3g patching will be faster on SOME firmwares.
    - added SERVER-based support for FLASHING, standalone support for usercode read for new SEMC smartphones - m600/m608/w950/w958/p990.
    carefully read instruction - that will help you NOT to kill expensive thing.
    instructions.
    first, you need download needed firmware package.
    add it to firmware area on smartphone tab.
    check "use server" and enter your login/password.
    now, you need install drivers for flashing.
    for that, poweron smartphone in fw update mode.
    - for p990/m600 press and hold "@" on TURNED OFF phone, then attach dcu60.
    - for w950 press and hold "C" on TURNED OFF phone, then attach dcu60.
    windows will ask you for a drivers. drivers in %setool2 dist%\drivers\HermioneDrivers. i attached a picture how correctly installed drivers must look in device manager.
    now, you can press desired operation.
    identify - to readout phone information (and userlock)
    flash - to flash package.
    !note. there is a checkbox named "process PDA update files" if you UNCHECK it - NO CREDIT WILL BE DEDUCTED from your account, but CDA will be UNCHANGED in phone. you got me ? ( got, lol ) yes, that is FREE FLASHING.
    !note. if you flashing multiple smartphones, BE SURE THAT DRIVERS ARE INSTALLED BEFORE starting desired operation.
    read gdfs - read gdfs for different things.
    write gdfs - write gdfs back.
    !note. if you write gdfs from other phone, say bye-bye to yours expensive pda.
    well, enough.
    lets flash'em.
    ps.
    p990 flashes will be uploaded in next day-two.
    p.p.s
    well, my competitors ... what to say... steal it world first kukuruzer

  32. #32
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    GUI v0.91380056

    - P990 chinese-based flashfiles failed on USERDATA part. fixed. (chinese flashes updated, you MUST re-download them)

    - i decided to reveal some feature for PDA phones.
    story:
    SEMC PDA phones has two revisions of chips. "new" and "old".
    "new" revision has changed security system and can not be made standalone.
    "old" revision has just impoved security and can be breached.

    so, as small present in upcoming new year, you have now opportunity to work FULLY (rebuild security, change imei, read/write gdfs, change CDA) with OLD REVISIONS of PDA (and there is a LOT OF THEM) WITHOUT SERVER.

    for that, first, you need determine security type (press identify, i attached two screens with old and new security)

    if security new - bad luck.
    if security old - uncheck use server and do whatever you like

    rest files attached, extract them to rest folder.

    ps.
    my usual fuckoff for all stealers - both commercial and free (se-nse)
    do you own, not steal my work.

  33. #33
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    GUI v0.91380057

    - critical bugfix - support was broken for all CID49 DB2000 phones. fixed. thx to duzz for report

  34. #34
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    GUI v0.91380058

    - bugfix. sometimes (very-very rare readout in ssw format was incorrect). fixed.
    ( thx goes to vascoff for reporting bug )

    - added csca-based unlock for NEW PDA revisions and K320 (well, you can use it for all other models, except db2020-based, but it will be waste of credits)

    how-to.

    1. insert DCU60 (only that is supported for csca unlock) in TURNED ON PHONE
    2. install drivers. included drivers for PDAs (drivers\hermione) and for K320 (drivers\k320_usb_signed_drivers)
    3. turn off phone, disconnect it
    4. select needed model
    5. check "use server for csca unlock/flash"
    6. press unlock
    7. when prompted, detach phone, turn it on and insert cable
    8. wait until all drivers appears
    9. press testpoint ok - phone will be unlocked.

    notes

    - csca-unlock only supported on .198 server
    - csca-unlock will NOT cure yours phone if you wrote to it GDFS from other phone
    - csca-unlock will only work stable and good on DCU60

    for now price for csca-unlock 5 credits
    csca-logs are rare, so they will periodically deplete, while flashing-log are still be online. i will inform about it in log-info thread



    thats all folks, i will not produce any more setool2 versions.... in that year

  35. #35
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    uploaded CID51 R1GB001 firmwares for K610,K618,K790,K800,Z610,W850,W830.

    note. that is CID51 firmwares. your phone must be upgraded to CID51.
    that is possible by two ways:

    - payd.
    execute script from script\db2020_cid49_to_cid51.txt of new setool2 distr.
    one credit will be spent.

    - free (slow,though)
    upgrade phone on SEUS. phone will be automatically converted to CID51.

    GUI v0.91380060

    - added support for DB2020 CID51 operations (flash,read/write gdfs,script,uselock reset,well, all standart operations)
    - "unlock after flash" incorrectly works with sharp3g phones USB flashing. fixed.
    - "unlock after flash" for lg3g+testpoint now recalc security automatically.
    - misc minor bugfixes.

  36. #36
    Banned I Am Who I Am's Avatar
    Clan br.
    2638
    Registrovan
    Oct 2006
    Br. postova
    28
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    GUI v0.91380061

    - cosmetic - fixed error message during lg unlock
    - cosmetic - wrong chipid (connections problems) filtered now.
    - addon - added workaround for white screen problem on db2010 sibley-based phones with ST flash and db2020 phones with ST flash.
    note - that is not panacea. it will only help SOMETIMES. usage is very simple - just full flash white screen phone with latest fw version using 061 setool2 version.

    rest files archive finally synched with latest rest files. if you already downloaded all rest files from news thread - you not need download rest archive.

  37. #37
    Banned I Am Who I Am's Avatar
    Clan br.
    2638
    Registrovan
    Oct 2006
    Br. postova
    28
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    GUI v0.91380062

    - otp<>gdfs imei check now supports latest pda firmware
    - some internal changes

  38. #38
    GSM Guru ringoel's Avatar
    Clan br.
    955
    Registrovan
    Mar 2006
    Lokacija
    7 Sela
    Godina
    36
    Br. postova
    129
    Hvala
    1
    Pohvaljen 1 put u 1 postu
    GUI v0.91380063

    - sadly,but in v0.91380063 DB2020 OTP CID51 support was broken, fixed
    - added SERVER-BASED FULL PERMANENT DB2020 UNLOCK. how to use.

    select USB as interface. that is REQUIRED.
    select K610 as phone model (or any other DB2020 model, they are same)
    settings - check "use server for csca unlock/flash", "do full unlock instead of usercode reset for db2020", fill your login details.

    back to semc tab, press unlock, attach phone with pressed "C" (or 2+5) buttons.

    wait for signature calculation, it can took about 2 minute.
    if calculation will fail, your credits will NOT be deducted.
    if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory.

    next, backup will be created so you will be able to restore phone if something will go wrong (hardly believe, but who knows...)

    next, you will be prompted to detach phone and turn it on.
    do so.
    detach phone.
    turn it on FULLY
    phone will be on 5 locks, that is normal.
    connect phone to usb.
    if phone will ask you switch to phone mode - switch to phone mode.
    it can ask you for drivers,if you not installed them previously.
    install all drivers (links below)
    be SURE that you install all drivers correctly.
    press "testpoint ok"
    procedure will continue,phone will be switched off and unlocked.

    remember, if something will go wrong - you have a backup of security units.

    cost of DB2020 unlock is 12 credits.
    currently, BOTH servers are supporting DB2020 unlock

    as usual, credits will NOT be recovered in case of connection failures.

    NOTE! there is STILL REMAIN SERVER-BASED USERCODE RESET FOR DB2020.
    it will work, if you UNCHECK option "do full unlock instead of usercode reset for db2020" and press UNLOCK.

    because of recent problems with sql server on support area, i will post links to new version and phone drivers here. hosting provider are informed about probles and, hopefully, they will be solved.

    phone drivers
    http://setool.net/common/phones.rar

    SEtool2
    http://setool.net/common/v0.91380063.rar

  39. #39
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    GUI v0.91380064

    - it was reported, that on some rare db2020 phones you got following error

    Code:
    loader unlock: executed
    Backup security data...
    var not exists
    Fail
    Elapsed:22 secs.
    it has been fixed.

    SEtool2
    http://setool.net/common/v0.91380064.rar

  40. #40
    GSM Guru ringoel's Avatar
    Clan br.
    955
    Registrovan
    Mar 2006
    Lokacija
    7 Sela
    Godina
    36
    Br. postova
    129
    Hvala
    1
    Pohvaljen 1 put u 1 postu
    GUI v0.91380065

    - public testing of db2020 phones reveals a error:

    if you, in same window, unlocked any NOT db2020 phone and then attempting to unlock db2020 phone - you will loose 1 credit and phone will be in "red blink" state after second step. of course, backup is created, so you can restore phone back to "live state. received signature is correct too, so yours 7 creds is not wasted. such thing has been fixed in current version.

Strana 1 od 5 12345 PoslednjiPoslednji

Slicne teme

  1. laptopovi potraznja novih
    Postovao ferati u forumu Razne poruke...
    Odgovori: 3
    Zadnji post: 26-04-10, 22:37
  2. verzija v2.02
    Postovao masaarnold u forumu Razne poruke...
    Odgovori: 45
    Zadnji post: 18-01-10, 15:39
  3. Objava novih verzija PSTOOL-a !!!
    Postovao MobileLand u forumu PStool
    Odgovori: 89
    Zadnji post: 21-12-08, 00:49
  4. Upotreba novijih verzija SETOOL v0.914029 i novije
    Postovao MobileLand u forumu SEtool support forum
    Odgovori: 4
    Zadnji post: 29-05-08, 00:18
  5. Da li je ok verzija 3.5.5 ?
    Postovao noki u forumu HWK
    Odgovori: 17
    Zadnji post: 27-10-07, 20:02

Pravila postovanja

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •