Prikazivanje rezultata 1 do 28 od 28

Tema: sl3 downgrade?

  1. #1
    GSM Guru
    Clan br.
    6823
    Registrovan
    Jul 2007
    Lokacija
    Beograd
    Godina
    37
    Br. postova
    156
    Hvala
    14
    Pohvaljen 3 puta u 2 postova

    sl3 downgrade?

    Pozdrav. Imam jednu nokiu e6 na kojoj treba spustiti software. Da li je neko imao iskustva sa mx key-em i da li je uopste moguce sa njim to uraditi, ili za sada downgrade se moze odraditi samo sa atf-om, cyclone-om i best dongle-om? Hvala

  2. #2
    GSM Guru NEC's Avatar
    Clan br.
    12646
    Registrovan
    Oct 2009
    Lokacija
    Makedonija
    Godina
    43
    Br. postova
    174
    Hvala
    93
    Pohvaljen 30 puta u 26 postova
    Mislim sa sad to BEST softver moze sa snimanjem SL-zone,RPL backup obavezno,Full erase ,upisivanje zeljenu verziju,SD-repair.

  3. #3
    GSM Guru
    Clan br.
    6823
    Registrovan
    Jul 2007
    Lokacija
    Beograd
    Godina
    37
    Br. postova
    156
    Hvala
    14
    Pohvaljen 3 puta u 2 postova
    ok, jasno mi je da sa best-om to moze, ali ja sam pitao za mx key? Dakle, da li je moguce odraditi sve to navedeno sa mx sigurno i bezbedno?

  4. #4
    GSM Expert Vlada84's Avatar
    Clan br.
    947
    Registrovan
    Mar 2006
    Lokacija
    Beograd
    Godina
    35
    Br. postova
    945
    Hvala
    125
    Pohvaljen 189 puta u 133 postova
    Budi muskoooo!
    Teoretski bi trebalo da prodje ali...

  5. #5
    GSM Guru
    Clan br.
    6823
    Registrovan
    Jul 2007
    Lokacija
    Beograd
    Godina
    37
    Br. postova
    156
    Hvala
    14
    Pohvaljen 3 puta u 2 postova
    haha dobar si . Ma rizikovao bih ja da ne moram posle da placam rpl nekome

  6. #6
    GSM Master Inovator's Avatar
    Clan br.
    247
    Registrovan
    Oct 2005
    Lokacija
    ...root/home/Bjelovar
    Br. postova
    670
    Hvala
    20
    Pohvaljen 52 puta u 29 postova
    S obzirom da ćeš u MX logu često vidjeti ovakav odsječak:

    SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
    warning: avoid SW Downgrade & manual erase to this phone



    zaključi sam

  7. #7
    GSM Expert Dr SEMA's Avatar
    Clan br.
    66
    Registrovan
    Sep 2005
    Lokacija
    KANDAHAR
    Br. postova
    2.528
    Hvala
    197
    Pohvaljen 659 puta u 314 postova
    i kad bi još rekao za koji će ti qrac downgrade????

  8. #8
    GSM Expert Gmobile_gRuJ@'s Avatar
    Clan br.
    10685
    Registrovan
    Feb 2008
    Lokacija
    Paracin
    Godina
    32
    Br. postova
    993
    Hvala
    75
    Pohvaljen 77 puta u 45 postova
    Citiram Original postovao Dr SEMA Pogledaj post
    i kad bi još rekao za koji će ti qrac downgrade????


    mozda mu se ne svidja Bela, lepsa mu Anica...

  9. #9
    GSM Master cybercom's Avatar
    Clan br.
    128
    Registrovan
    Oct 2005
    Lokacija
    Vrbas,Vojvodina
    Godina
    46
    Br. postova
    718
    Hvala
    16
    Pohvaljen 67 puta u 39 postova
    Drugari, iz duznog postovanja prema svima nama, i onima koji ne znaju doticnog kolegu.
    Kolega @iksi je osoba kojoj treba skinuti "kapu". Ne bi da ga uvredim sa terminom na koji cu reci (jer nemam pojma da li je ispravno ili ne) : Kolega ima taj problem da uopste ne vidi ( da je SLEPA osoba).
    On i uprkos svom problemu, radi posao (oko GSM-a) ali posto ,normalno ne moze da radi sve poslove kao i mi, bazirao se na softver.
    Ajde, sada mi da probamo sa zavezanim ocima da uradimo UNLOCK, bilo kojeg telefona i videcemo koliko je to tesko.
    Kolega, koliko sam ja upoznat pomaze zajednicu slepih i slabovidih u BG-u, a moja je pretpostavka da mu treba SPUSTANJE softa na telefonu radi ubacivanja CUSTOM softa, radi koriscenja raznoraznih programa (kao sto su programi koji "citaju" sa ekrana) a mogu da rade iskljucivo samo sa odredjenom verzijom softa !

  10. Sledecih 12 clanova foruma reklo je hvala cybercom na ovom korisnom postu:


  11. #10
    GSM Guru
    Clan br.
    6823
    Registrovan
    Jul 2007
    Lokacija
    Beograd
    Godina
    37
    Br. postova
    156
    Hvala
    14
    Pohvaljen 3 puta u 2 postova
    @ postovan tacno. Ok, nije nikakav problem nisi me uvredio terminologija je sasvim na mestu :-)). Nego, da se vratim na temu. Ovaj telefon mi je zapravo dosao u jako cudnom stanju. Software je podignut kako mi covek rece a pri tom kad sam iscitao telefon phoenix mi je prikazivao verziju koja je pocinjala sa 111. Pri tom telefon se ponasao veoma cudno, n e samo nakon instalacije govornog software-a vec su i meniji cak bili izmesani. Ovako nesto sam prvi put video juce na tom telefonu. Pokusao sam da ga preflesujem sa najvecom verzijom da vidim da li ce biti ista situacija, pa da ga posle spustam ako bude bilo velikih problema sa tim govornim programom, ali telefon sada jednostavno nece da upali cime god i na koju god verziju da se digne, pri tom mx prilikom flashovanja ispisuje u loogu sledece, e, partitioning 500 mb, sto mi je prilicno cudno, a od svega je njajgore sto sada ne mogu da napravim backup pm-a, dok je rpl backup prosao bez problema. Sad je izgleda jedina solucija full erase plus ispravan pm, ili postoji neka bezbolnija varijanta? Hvala.


    Evo ga i mt log

    BB5 PM back Phone is in: Phone is not responding!
    Processing File: RM-609_025.008_79.92_prd.core.fpsx
    Boot...
    CONNECT PHONE to USB and Power ON phone!
    Pooling for phone...
    \\?\nmwcd#vid_0421&pid_0106&if_oth#6&14bd1b0a&0&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
    # SYSTEM_ASIC_ID( RAP ): 000000030000022600010007600C192102031104
    # EM_ASIC_ID( RAP ): 00001040
    # EM_ASIC_ID( RAP ): 00001030
    # PUBLIC_ID( RAP ): 10D001022BE95840844DC9C55AAD61D4E9634D3B
    # ASIC_MODE_ID( RAP ): 00
    # ROOT_KEY_HASH( RAP ): 916F75217F32081248B15C38DFC8E81B
    # ROM_ID( RAP ): E693EF0DAC22615B
    Version 010.043.000.
    Revision 0300 (768)
    eBB5ProtocolType=New
    BusType 0001
    RAPUv11_2nd.fg
    Processed KeyCertificate DCT5
    Processed CommonHeader DCT5
    Processed Application DCT5
    Sending ULO code
    Wait Alive Message...
    Received Alive Message
    Version 010.043.000.
    Revision 0300 (768)
    eBB5ProtocolType=New
    RAPUv11_XSR17_alg.fg
    Manufacturer Code : 0020
    Device ID : 0068
    Extended/Fixed ID : 0000
    Revision ID : 0000
    Size : 40000000 (1024.00)
    VPP Info : 0000
    Erase 300 s,BlockErase 2 s, BlockFlash 50 s
    Wait Alive Message...
    Received Alive Message
    Waiting for Loader Restart
    Pooling for device removal...
    Pooling for ADL device...
    \\?\nmwcd#vid_0421&pid_0106&if_oth#6&14bd1b0a&0&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
    # PAPUB( RAP 327C6B67C95DA04A763DEFD4BA15C19FF16D9AE7
    StoreCertificates
    NPC
    CCC
    HWC
    R&D
    PARTNERC
    PartitionInfo
    Number of blocks 1:
    CMT:MuxOneNAND[0] Partition Version 00020000
    NumPartitions 5
    COPIEDOS: RO # Start: 00140000, Size: 02F20000
    DEMANDONOS: RO # Start: 03060000, Size: 0E6A0000
    FILESYSTEM: RW # Start: 11700000, Size: 1CA00000
    NONAME: RW # Start: 2E100000, Size: 10500000
    NONAME: RW # Start: 3E600000, Size: 00400000
    CMT Certificates
    NPC 0x0200
    HWC 0x0100
    CCC 0x0200
    C:\Program Files\GriffinTeam\MT-Box\rpls\354875041045219_4.rpl
    Erase[1076.50 MB]...
    erasing RAP [00040000 to 0007FFFF]
    erasing RAP [000C0000 to 008BFFFF]
    erasing RAP [010C0000 to 116FFFFF]
    erasing RAP [2E100000 to 3E5FFFFF]
    erasing RAP [11700000 to 2E0FFFFF]
    erasing RAP [0C000000 to 1037FFFF]
    erasing RAP [10380000 to 116FFFFF]
    in 12.84s
    Flash[121.23 MB]...in 18.72s
    * * Processed file in 39.64 seconds
    Processing File: RM-609_025.008_U10.01_79.92.uda.fpsx
    Boot...
    \\?\nmwcd#vid_0421&pid_0106&if_oth#6&14bd1b0a&0&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
    Erase[0.00 MB]...
    in 0.19s
    Flash[1.00 MB]...
    %%%%%%%% ERROR SENDING FLASH:
    Failed at address 11700000
    Izmenio Iksi : 14-02-12 u 19:30

  12. #11
    GSM Master JovanK's Avatar
    Clan br.
    10754
    Registrovan
    Feb 2008
    Lokacija
    Podgorica
    Godina
    33
    Br. postova
    277
    Hvala
    56
    Pohvaljen 66 puta u 46 postova
    Imam slican problem, telefon dosao na servis ubiven, musterija sama pokusala da ga update-uje.
    Dead usb flash sa Phoenix prodje do kraja, do 100% ali onda izbaci error, i retry opciju. Sa Fenix key slicno, prodje do kraja, ali kada treba da boot-uje telefon samo stoji
    Finishing loader session...
    Switching on device..
    Cannot wake up the phone
    Job's finished with errors!

    Telefon ne pali naravno.
    Probane verzije softvera i 111.xxxx i 0.25, ne znam koja je zadnja od ove dvije.
    Cyclone prek usb-a nece ni da ga pocne flesovati (no RAW loader founf in selected image), f-bus kabal nemam.
    Izmenio JovanK : 14-02-12 u 21:19 Razlog: Dodat opis greske koju izbaci cyclone

  13. #12
    GSM Guru
    Clan br.
    6823
    Registrovan
    Jul 2007
    Lokacija
    Beograd
    Godina
    37
    Br. postova
    156
    Hvala
    14
    Pohvaljen 3 puta u 2 postova
    hmm, a sta kaze mx? Ajd pusti log phoenix-a? Takodje, pokusaj mt... Kod mene su se particije totalno pobrkale poslednja verzija ti je 24508 ja mislim i to postoji samo u varijanti sa us i canada product kodovima ali mozes da koristis ppm file od 2507... Veruj mi i ja sam totalno zbunjen sto se verzija software-a tice za ovaj telefon.

  14. #13
    GSM Master JovanK's Avatar
    Clan br.
    10754
    Registrovan
    Feb 2008
    Lokacija
    Podgorica
    Godina
    33
    Br. postova
    277
    Hvala
    56
    Pohvaljen 66 puta u 46 postova
    Citiram Original postovao Iksi Pogledaj post
    hmm, a sta kaze mx? Ajd pusti log phoenix-a? Takodje, pokusaj mt... Kod mene su se particije totalno pobrkale poslednja verzija ti je 24508 ja mislim i to postoji samo u varijanti sa us i canada product kodovima ali mozes da koristis ppm file od 2507... Veruj mi i ja sam totalno zbunjen sto se verzija software-a tice za ovaj telefon.
    Kacim logove dok veceram, ali sad nadjoh da je ipak zadnja verzija 111.130.0625, to je Bella.

    Latest software release for Nokia E6–00 is Nokia Belle (111.130.0625)
    Have up to six home screens with live widgets in different sizes
    Personalise your home screens with home screen widgets and shortcuts
    Get where you want to go quickly with the help of simpler menus
    See notifications and your connectivity options on any screen
    Customise your lock screen with wallpapers and important info
    Get improved apps for navigating, imaging, and browsing the web

    Mada sam ja i nju upisivao, al nece opet isto.

  15. Sledeci korisnici su rekli hvala JovanK za ovaj koristan post:


  16. #14
    GSM Master JovanK's Avatar
    Clan br.
    10754
    Registrovan
    Feb 2008
    Lokacija
    Podgorica
    Godina
    33
    Br. postova
    277
    Hvala
    56
    Pohvaljen 66 puta u 46 postova
    Evo Phoenix loga

    Kod:
    Flashing started
    Creating product data items list
    Product data items list created
    Backup not required
    Flashing phone
    Initializing
    Scanning image files...
    Waiting for USB device...
    Loading secondary boot code: 15168 bytes
    Secondary boot loaded
    BB Asic Index is: 00
    Asic ID is: 000000030000022600010007600C192102031104
    BB Asic Index is: 00
    EM Asic ID is: 00001040
    BB Asic Index is: 00
    EM Asic ID is: 00001030
    BB Asic Index is: 00
    Public ID is: 1320000786DA034407B7A101FC0B8098F817E37C
    BB Asic Index is: 00
    Asic Mode ID: 00
    BB Asic Index is: 00
    Hash: 916F75217F32081248B15C38DFC8E81B
    BB Asic Index is: 00
    ROM ID: E693EF0DAC22615B
    BB Asic Index is: 00
    Device type is: 05
    Device Index is: 00
    Manufacturer code: 0000
    Device ID: 0000
    Extended device ID: 0000
    Revision ID: 0000
    BB Asic Index is: 00
    Device type is: 04
    Device Index is: 00
    Manufacturer code: FFFF
    Device ID: 0000
    Extended device ID: 0000
    Revision ID: 0000
    BB Asic Index is: 00
    Device type is: 00
    Device Index is: 00
    Manufacturer code: 0020
    Device ID: 0068
    Extended device ID: 0000
    Revision ID: 0031
    BB Asic Index is: 00
    Device type is: 00
    Device Index is: 01
    Manufacturer code: 0000
    Device ID: 0001
    Extended device ID: 0000
    Revision ID: 0000
    BB Asic Index is: 00
    Device type is: 03
    Device Index is: 00
    Manufacturer code: 0020
    Device ID: 0068
    Extended device ID: 0000
    Revision ID: 0031
    Loading update server code: 868528 bytes
    Update server loaded
    Asic CMT: Start programming 312067 KB...
    Asic CMT: Programming data sent: 0%
    Asic CMT: Programming data sent: 10%
    Asic CMT: Programming data sent: 20%
    Asic CMT: Programming data sent: 30%
    Asic CMT: Programming data sent: 40%
    Asic CMT: Programming data sent: 50%
    Asic CMT: Programming data sent: 60%
    Asic CMT: Programming data sent: 70%
    Asic CMT: Programming data sent: 80%
    Asic CMT: Programming data sent: 90%
    Asic CMT: Programming data sent: 100%
    Programming complete
    Asic CMT: Verifying communication to device...
    Waiting for communication response: 25
    Waiting for communication response: 24
    Waiting for communication response: 23
    Waiting for communication response: 22
    Waiting for communication response: 21
    Waiting for communication response: 20
    Waiting for communication response: 19
    Waiting for communication response: 18
    Waiting for communication response: 17
    Waiting for communication response: 16
    Waiting for communication response: 15
    Waiting for communication response: 14
    Waiting for communication response: 13
    Waiting for communication response: 12
    Waiting for communication response: 11
    Waiting for communication response: 10
    Waiting for communication response: 9
    Waiting for communication response: 8
    Waiting for communication response: 7
    Waiting for communication response: 6
    Waiting for communication response: 5
    Waiting for communication response: 4
    Waiting for communication response: 3
    Waiting for communication response: 2
    Waiting for communication response: 1
    Error 0x8401F121 communicating to phone. Unable to verify comm.
    Warning: Unable to communicate to product after flashing
    Starting to recover the phone
    Recovering phone
    Initializing
    Scanning image files...
    Phone recovery completed. Waiting for phone to boot up
    Bootup successful
    Verifying communication to product (before flash finalizing) 
    Communication verified
    Verifying communication to product (before flash finalizing) 
    Communication verified
    All operations completed
    Firmware updating failed.
    Fenix key log
    Kod:
    Software version: 1.2.0
    Detected card sn: 69AF0648B322
    Card version: 01.00
    Life counter: 99.22%
    Fenix Reader SW version: 0.0.2
    Connection interface is set to USB now.
    Looking for flash files
    Flash files found for selected product
    No phone found. Connect your phone using USB cable and try again.
    No phone found. Connect your phone using USB cable and try again.
    Flashing started
    PLEASE PRESS PHONE`S POWER BUTTON
    CMT Hash : 916F75217F32081248B15C38DFC8E81B
    CMT Hw ID: 600C192102031104
    CMT Boot ROM CRC: E693EF0D
    CMT Secure ROM CRC: AC22615B
    CMT Public Id: 1320000786DA034407B7A101FC0B8098F817E37C
    Preparing bootstrap to use USB BootMedia
    Sending RAW 2ND
    Sending RAW ALGO
    Reconnecting
    Loader is alive!
    Reading certificates
    Reading CMT certificates
    Reading NPC
    Saving NPC
    Reading VARIANT
    VARIANT is empty
    Reading CCC
    Saving CCC
    Reading HWC
    Saving HWC
    Certificates saved as: C:\Documents and Settings\JovanK\My Documents\Lavarow\Fenix\Backup\Certs\2-14-2012 10-08-43 PM000000030000022600010007600C192102031104-2-14-2012 10-08-43 PM.rpl
    Checking software version
    Partitioning file: RM-609_111.130.0625_79_prd.core.fpsx
    Erasing MCUSW Flash area
    Erasing CMT area 00040000 - 0007FFFF
    Erasing CMT area 000C0000 - 008BFFFF
    Erasing CMT area 00DC0000 - 116FFFFF
    Erasing CMT area 2E100000 - 3E5FFFFF
    Erasing CMT partition
    Erasing PPM Flash area
    Erasing CMT area 0CC80000 - 107BFFFF
    Erasing CNT Flash area
    Erasing CMT area 11700000 - 2E0FFFFF
    Erasing CMT area 008C0000 - 00DBFFFF
    Erasing CMT area 01378000 - 0139FFFF
    Erasing CMT area 107C0000 - 116FFFFF
    Flashing MCUSW
    Sending ADA
    Sending KEYS
    Sending PRIMAPP
    Sending RAP3NAND
    Sending SOS+PMML
    Sending SOS+DECOMP
    Sending PASUBTOC
    MCU PAPUBKEYS are missing, sending first available block
    Sending PAPUBKEYS
    Sending GENIO_INIT
    Sending SOS+IVE3A
    Sending SOS*UPDAPP
    Sending SOS*DSP0
    Sending LDSP
    Sending SOS*ISASW
    Sending SOS+CORE
    Sending SOS+ROFS1
    Short delay between flash files
    Flashing PPM
    Sending SOS+ROFS2
    Short delay between flash files
    Flashing CNT
    Flashing additional files
    Flashing RM-609_APEONLY_eno.fpsx
    Sending SOS*ENO
    Short delay between flash files
    Flashing RM-609_111.130.0625_C00.02_79_prd.rofs3.fpsx
    Sending SOS+ROFS3
    Sending SOS+IVE3B
    Short delay between flash files
    Finishing loader session...
    Switching on device..
    Cannot wake up the phone
    Job's finished with errors!

  17. #15
    GSM Guru
    Clan br.
    6823
    Registrovan
    Jul 2007
    Lokacija
    Beograd
    Godina
    37
    Br. postova
    156
    Hvala
    14
    Pohvaljen 3 puta u 2 postova
    Kod mene proradilo sa novim firmware-om
    Phoenix log:
    Flashing started
    Creating product data items list
    Product data items list created
    Backup not required
    Flashing phone
    Initializing
    Scanning image files...
    Waiting for USB device...
    Loading secondary boot code: 15168 bytes
    Secondary boot loaded
    BB Asic Index is: 00
    Asic ID is: 000000030000022600010007600C192102031104
    BB Asic Index is: 00
    EM Asic ID is: 00001040
    BB Asic Index is: 00
    EM Asic ID is: 00001030
    BB Asic Index is: 00
    Public ID is: 10D001022BE95840844DC9C55AAD61D4E9634D3B
    BB Asic Index is: 00
    Asic Mode ID: 00
    BB Asic Index is: 00
    Hash: 916F75217F32081248B15C38DFC8E81B
    BB Asic Index is: 00
    ROM ID: E693EF0DAC22615B
    BB Asic Index is: 00
    Device type is: 05
    Device Index is: 00
    Manufacturer code: 0000
    Device ID: 0000
    Extended device ID: 0000
    Revision ID: 0000
    BB Asic Index is: 00
    Device type is: 04
    Device Index is: 00
    Manufacturer code: FFFF
    Device ID: 0000
    Extended device ID: 0000
    Revision ID: 0000
    BB Asic Index is: 00
    Device type is: 00
    Device Index is: 00
    Manufacturer code: 0020
    Device ID: 0068
    Extended device ID: 0000
    Revision ID: 0031
    BB Asic Index is: 00
    Device type is: 00
    Device Index is: 01
    Manufacturer code: 0000
    Device ID: 0001
    Extended device ID: 0000
    Revision ID: 0000
    BB Asic Index is: 00
    Device type is: 03
    Device Index is: 00
    Manufacturer code: 0020
    Device ID: 0068
    Extended device ID: 0000
    Revision ID: 0031
    Loading update server code: 813978 bytes
    Update server loaded
    Asic CMT: Start programming 312067 KB...
    Asic CMT: Programming data sent: 0%
    Asic CMT: Programming data sent: 10%
    Asic CMT: Programming data sent: 20%
    Asic CMT: Programming data sent: 30%
    Asic CMT: Programming data sent: 40%
    Asic CMT: Programming data sent: 50%
    Asic CMT: Programming data sent: 60%
    Asic CMT: Programming data sent: 70%
    Asic CMT: Programming data sent: 80%
    Asic CMT: Programming data sent: 90%
    Asic CMT: Programming data sent: 100%
    Programming complete
    Asic CMT: Verifying communication to device...
    Phone flashing completed. Waiting for phone to boot up
    Bootup successful
    Verifying communication to product (before flash finalizing)
    Communication verified
    Product code changed
    Doing factorysets
    Factorysets complete
    Loading default data to phone
    Loading default data to phone
    Getting Data Package
    Reading product state
    Starting backup/restore sub-procedure: data item pre-delay
    data item pre-delay
    data item pre-delay
    Sub-procedure completed: Succeeded., result code: 0
    Starting to backup/restore data item: ProductProfile, version: 1.1
    Data Item backup/restore completed: Succeeded., result code: 0
    Starting backup/restore sub-procedure: data item post-delay
    data item post-delay
    data item post-delay
    Sub-procedure completed: Succeeded., result code: 0
    Backup/restore result: 0 out of 1 items were not backed up
    Default data loading complete
    Stopping all operations, returning phone to default mode
    All operations completed
    Firmware updating succeeded.

  18. #16
    GSM Master JovanK's Avatar
    Clan br.
    10754
    Registrovan
    Feb 2008
    Lokacija
    Podgorica
    Godina
    33
    Br. postova
    277
    Hvala
    56
    Pohvaljen 66 puta u 46 postova
    Litar vina, mia BELA sinjorina.....

  19. Sledeci korisnici su rekli hvala JovanK za ovaj koristan post:


  20. #17
    GSM Master YuMERA's Avatar
    Clan br.
    511
    Registrovan
    Dec 2005
    Lokacija
    Šid, Srbija
    Godina
    55
    Br. postova
    348
    Hvala
    67
    Pohvaljen 163 puta u 63 postova
    Kad smo vec kod Belle imali neko svoje misljenje kako to izgleda na telefonu, ja sam gledao klipove na YouTube i nesto mi se nije dopalo a ne bi moju N8 da ostavim bez Anne.

  21. #18
    GSM Master rama's Avatar
    Clan br.
    545
    Registrovan
    Dec 2005
    Lokacija
    Ruma
    Godina
    49
    Br. postova
    657
    Hvala
    147
    Pohvaljen 249 puta u 88 postova
    Ja koristio n8 sa Bellom,veruj mi da je Anna smesna kako dobro radi bella

  22. Sledeci korisnici su rekli hvala rama za ovaj koristan post:


  23. #19
    GSM Guru
    Clan br.
    6823
    Registrovan
    Jul 2007
    Lokacija
    Beograd
    Godina
    37
    Br. postova
    156
    Hvala
    14
    Pohvaljen 3 puta u 2 postova
    Pozdrav. Jovane najpre hvala jos jednom. Telefon je proradio, medjutim od kad je dignut software na bel javlja se cudan problem. Telefon radi normalno ali kad ga skeniram preko mx-a uopste mi ne prikazuje detalje vezane za mrezu i security i ako sam stiklirao extended scan. Drugo mx telefon prepoznaje kao Nokia USB Phonet - 137A82EB, sto cini mi se nije bio slucaj u junu kad mi je ovaj telefon prvi put dosao na dizanje software-a i hackovanje symbian-a. Treca stvar kad kliknem na flash dobijem poruku da flash ne moze da krene i da izvadim bateriju i vratim je ponovo ili da ukljucim punjac. Napominjem da je baterija skroz puna a da mi mx prekazuje da je skoro prazna. Evo i logova. Najpre sam sada pokusao da kliknem na scan ali nije htelo pa sam stiklirao ded usb i ovo loga
    MXKEY [FT SCR2000 0], SN: C080939A
    Using device: USB Phonet
    Connection status: EHCI:HUB:USB 2.00 (High-speed)
    Driver: nmwcdc, ver: 7.1.32.70
    Module ver: 1.0.0.19798(05-01-2012), Library ver: 1.0.0.13703(05-01-2012)
    Rpl backup already exist (C:\mobileEx\3.5\data\backup\BB5_r1_11w42.6 12-_PM.rpl).
    Processing MCU file: RM-609_111.130.0625_79_prd.core.fpsx
    [BB5,XSR 1.6] size: 137.77 MB
    Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
    Make sure USB cable, Battery and charger are removed from device.
    Insert USB cable, Battery back to device(make sure to have fully charged battery).
    Insert Charger or Press phone's power button(if flashing doesnt start automatically)
    Waiting for USB ROM device ...
    Waiting for USB ROM device ...
    Make sure USB cable, Battery and charger are removed from device.
    Insert USB cable, Battery back to device(make sure to have fully charged battery).
    Insert Charger or Press phone's power button(if flashing doesnt start automatically)
    Waiting for USB ROM device ...
    Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 14BD1B0A
    CMT SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPUYAMA ver: 1.1]
    CMT EM0 ID: 00001040
    CMT EM1 ID: 00001030
    CMT PUBLIC ID: 10D001022BE95840844DC9C55AAD61D4E9634D3B
    CMT ASIC MODE ID: 00
    CMT ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
    CMT ROM ID: E693EF0DAC22615B
    Loading CMT secondary boot code
    SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 11.14.0 revision: 3.0 size: 0x3B40
    Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
    eBB5ProtocolType: NEW
    Secondary boot loaded.
    Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
    Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
    Storage2: 0020 0068 - 0000 0031 [ST LH28F160BG] type: FLASH,NOR, asic:CMT
    Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
    Storage4: 0020 0068 - 0000 0031 [ST LH28F160BG] type: FLASH,MuxOneNAND, asic:CMT
    Loading CMT update server data
    Algorithm: RAPUv11_XSR17_alg.fg [XSR 1.6] version: 11.14.0 revision: 3.0 size: 0xC66D5
    Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
    Update server code loaded.
    Waiting for USB device removal ...OK
    Waiting for USB device arrival ...OK
    Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 14BD1B0A
    FUR: Adding Asic CMT as client OK.
    Reading CMT NPC (0x190 bytes).
    Reading CMT VARIANT (0x0 bytes).
    Reading CMT CCC (0x1E4 bytes).
    Reading CMT HWC (0xD4 bytes).
    Reading CMT R&D (0x0 bytes).
    Reading CMT PARTNERC (0x0 bytes).
    NPC_DATA saved OK
    CCC_DATA saved OK
    HWC_DATA saved OK
    RPL saved to "C:\mobileEx\3.5\data\backup\BB5_35487504104521_CE RT.rpl"
    CMT PAPUBKEYS HASH: 327C6B67C95DA04A763DEFD4BA15C19FF16D9AE7
    Storing certificate [NPC, CCC, HWC, R&D, PARTNERC] ...OK
    Partitioning....
    Partitioning complete
    Erase size: 534.56 MB
    CMT FLASH,MuxOneNAND area [00040000-0007FFFF]
    CMT FLASH,MuxOneNAND area [000C0000-008BFFFF]
    CMT FLASH,MuxOneNAND area [00DC0000-116FFFFF]
    CMT FLASH,MuxOneNAND area [2E100000-3E5FFFFF]
    Formating partition ...
    Flash programming ...
    Error while programming [00] at 0x00000000, Result: 0000
    Sad mogu da ga vratim jedino phoenix-om ili mt-om na ded usb pod uslovom da ne upisujem uda file, dok isti sa phoenix-om prolazi bez problema. Izgleda da i ovo kao i dongrade moze da resi jedino full erase, imam 3 sacuvana rpl-a nadam se da valja bar jedan, velicine su 2,59 kb... p. s. vratio sam ga sa phoenix-om i opet nece scan na mx... Cim uspem da ga iscitam postovacu log.
    Izmenio Iksi : 16-02-12 u 16:45

  24. #20
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Nekoliko stvari:
    -Kazes radi normalno.
    -Zasto bi ga skenirao i proveravao?
    -Imas neki odredjeni razlog i koji ako ga ima?
    -Da li zelis da ti pomognemo i resimo sa nekim drugim alatom ili bi voleo da resis sam!?
    Pozdrav Andrija

  25. #21
    GSM Guru
    Clan br.
    6823
    Registrovan
    Jul 2007
    Lokacija
    Beograd
    Godina
    37
    Br. postova
    156
    Hvala
    14
    Pohvaljen 3 puta u 2 postova
    da, radi normalno. Morao sam da ga skeniram kako bih pripremio sve za downgrade jer coveku ne odgovara bel. Kad sam ga iscitao dobio sam taj log koji izgleda ovako.

    SW version: V 79_sr1_11w42.6 12-12-11 RM-609 (c) Nokia
    Imei plain: 35487504104521-9
    Product code: 059G0W0
    Battery voltage: 4125 mV, current: 87 mA
    ApeCoreSw: 111.130.0625
    Language Pack:
    - not available.

    SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
    warning: avoid SW Downgrade & manual erase to this phone !


    Latest software release for Nokia E6–00 is Nokia Belle (111.130.0625)

    Iskreno voleo bih ovo da okusam sam da resim obzirom da je prilicno ne svakidasnji problem, naravno uz par sugestija iskusnijih kolega. Od alata imam trenutno mx i mt a mozda sutra dodjem do best dognle-a na par sati pa ce tu i on biti od pomoci u koliko ne resim sve sa mx-om.

  26. #22
    Product Supporter scorpy's Avatar
    Clan br.
    334
    Registrovan
    Nov 2005
    Lokacija
    Becej
    Godina
    43
    Br. postova
    401
    Hvala
    158
    Pohvaljen 45 puta u 25 postova
    Bez kompletnog brisanja nemozes uraditi downgrade na tom modelu a ja nebih se bas pouzdavao u taj rpl sto ti MX snimi, nije dovoljno da snimi imei jer PM 308 polje neces moci vratiti u telefon jer je zasticeno.
    MT nemoze da flashuje velike UDA fajlove.
    Posalji bolje telefon nekom ko je vec radio to, ako nemas nikog blize posalji meni, resicu ti bez ikakve nadoknade.

  27. #23
    GSM Guru
    Clan br.
    6823
    Registrovan
    Jul 2007
    Lokacija
    Beograd
    Godina
    37
    Br. postova
    156
    Hvala
    14
    Pohvaljen 3 puta u 2 postova
    Citiram Original postovao scorpy Pogledaj post
    Bez kompletnog brisanja nemozes uraditi downgrade na tom modelu a ja nebih se bas pouzdavao u taj rpl sto ti MX snimi, nije dovoljno da snimi imei jer PM 308 polje neces moci vratiti u telefon jer je zasticeno.
    MT nemoze da flashuje velike UDA fajlove.
    Posalji bolje telefon nekom ko je vec radio to, ako nemas nikog blize posalji meni, resicu ti bez ikakve nadoknade.
    kolega, hvala puno, do sutra ujutru ako ne nadjem neko resenje poslacu ga ili tebi ili nekome od kolega ko je blize. Covek me je zvao malo pre i hoce da mu telefon bude gotov do sutra pre podne, tako da sam u po prilicnom sosu :-)). znam za 308 da se nemoze vratiti zato sam i pitao kakva je procedura ukratko za downgrade sa full erase preko mx-a. Trebalo bi od prilik, full erase, upisivanje rpl-a, i full pm-a bez kriticnog 308 a, simlok zatim service tab pa quick fix pa quick fix bb5 downgrade i to bi trebalo da zavrsi posao... ali...? Naravno ni ja se ne uzdam u taj rpl koji je napravljen prilikom flashovanja pa cu da ga iscitam jos jednom, ono sto me brine je sto mi nije sacuvao ili bar ne pise u logu da je sacuvao security i superdongle....

  28. #24
    Product Supporter scorpy's Avatar
    Clan br.
    334
    Registrovan
    Nov 2005
    Lokacija
    Becej
    Godina
    43
    Br. postova
    401
    Hvala
    158
    Pohvaljen 45 puta u 25 postova
    Citiram Original postovao Iksi Pogledaj post
    kolega, hvala puno, do sutra ujutru ako ne nadjem neko resenje poslacu ga ili tebi ili nekome od kolega ko je blize. Covek me je zvao malo pre i hoce da mu telefon bude gotov do sutra pre podne, tako da sam u po prilicnom sosu :-)). znam za 308 da se nemoze vratiti zato sam i pitao kakva je procedura ukratko za downgrade sa full erase preko mx-a. Trebalo bi od prilik, full erase, upisivanje rpl-a, i full pm-a bez kriticnog 308 a, simlok zatim service tab pa quick fix pa quick fix bb5 downgrade i to bi trebalo da zavrsi posao... ali...? Naravno ni ja se ne uzdam u taj rpl koji je napravljen prilikom flashovanja pa cu da ga iscitam jos jednom, ono sto me brine je sto mi nije sacuvao ili bar ne pise u logu da je sacuvao security i superdongle....

    Delom ispravno, ovo crveno totalno ne pije vodu, na sl3 nikakav "quick fix" nece raditi.
    Zato i kazem, ne igraj se, kompletno sve mora biti snimljeno kao rpl, kao pm neces simlock upisati

  29. #25
    GSM Guru
    Clan br.
    6823
    Registrovan
    Jul 2007
    Lokacija
    Beograd
    Godina
    37
    Br. postova
    156
    Hvala
    14
    Pohvaljen 3 puta u 2 postova
    ok, samo nismo se razumeli, tj mozda sam pogresno napisao, rpl, pa posebno pm i nakon njega treci file. Naravno da ne mogu upisati preko pm-a simlock .. Fajlovi koje imam su:
    BB5_35487504104521_CERT.rpl, velicina 2,59 kb
    bb5_35487504104521.pm, velicina 100 kb, iscitano preko mt box-a
    i BB5_RM-609_354875041045219_SIM.RPL, velicina 3,11 kb. btw nisam bio siguran da li ta opcija quick fix funkcionise i za sl3 ali svala na razjasnjenju. Zbunilo me je to sto sam na jednom od gsm foruma procitao da navodno ta opcija vraca backup rpl-a, pm-a i simlock a zatim sx4. U svakom slucaju hvala na informaciji.

  30. #26
    Balkan GSM Team Ivan's Avatar
    Clan br.
    621
    Registrovan
    Jan 2006
    Lokacija
    CACAK N43o 53.421' E20o 20.922'
    Godina
    41
    Br. postova
    1.761
    Hvala
    172
    Pohvaljen 255 puta u 104 postova
    jesi ziv Iksi

  31. #27
    GSM Master JovanK's Avatar
    Clan br.
    10754
    Registrovan
    Feb 2008
    Lokacija
    Podgorica
    Godina
    33
    Br. postova
    277
    Hvala
    56
    Pohvaljen 66 puta u 46 postova
    Ja ipak nisam imao srece kao kolega Ivan (iksi)
    Kod mene i posle full erase na cyclone, prolazi softver, ali ne pali, samo ostane na nokia logo, ako ubacim anu, ili ne bijele tackice koje se krecu kod bele, probano par puta i nece.
    RPL imam sacuvan, pod uslovom da je validan, jer je telefon vec bio ubiven kad je dosao do mene, mrtav skroz, PM mi je IKSI poslao iz njegova, ali ne pali. Sve radjeno sa usb kablom i probano na phoenix, fenix key i cyclone.

  32. #28
    GSM Guru
    Clan br.
    6823
    Registrovan
    Jul 2007
    Lokacija
    Beograd
    Godina
    37
    Br. postova
    156
    Hvala
    14
    Pohvaljen 3 puta u 2 postova
    @Ivan, nisam se oglasavao jer nije bilo novih momenata osim sto covek nije dosao po telefon, zapravo prvo mi je trazio da mu istestiram kako neke stvari rade na bel-u kad vec nisam uradio dowgrade, ali to radi jako jako lose. U ponedeljak mi stize best pa cemo da vidimo. @Jovan, probaj sa nekim drugim pm-om. p. s. kad iscitas telefon da li suu redu simlock, superdongle, security. Skroz je nenormalno da i nakon full erase nece da upali. Jos cudnije je da nisi uspeo na sa phoenix-om da ga dignes, jer se kod njega desava da telefone koje on ubije sa njim jedino i mozes da vratis mada su ovakvi slucajevi jako velika retkost.

Slicne teme

  1. n95 8gb v35 downgrade
    Postovao zeljkobg u forumu BB5 modeli
    Odgovori: 14
    Zadnji post: 12-01-10, 15:22
  2. downgrade 6085
    Postovao roba_nt u forumu BB5 modeli
    Odgovori: 10
    Zadnji post: 21-11-07, 15:32
  3. N95 v14 downgrade to 13
    Postovao deYo u forumu BB5 modeli
    Odgovori: 3
    Zadnji post: 09-11-07, 22:23
  4. N70 downgrade nece....
    Postovao Ekran u forumu BB5 modeli
    Odgovori: 2
    Zadnji post: 26-10-07, 23:52
  5. New JAF version 1.98.5-BB5 DOWNGRADE
    Postovao garfild u forumu J.A.F.
    Odgovori: 5
    Zadnji post: 04-03-07, 09:21

Pravila postovanja

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •