Prikazivanje rezultata 1 do 3 od 3

Tema: N900 restar nakon flash

  1. #1
    GSM Guru compart's Avatar
    Clan br.
    1473
    Registrovan
    May 2006
    Lokacija
    Backa Topola
    Godina
    32
    Br. postova
    216
    Hvala
    1
    Pohvaljen 13 puta u 3 postova

    N900 restar nakon flash

    ================================================== ====
    ================================================== ====
    MAEMO / MEEGO BB5 USB Flashing
    ================================================== ====
    ================================================== ====

    1. Turn OFF Phone and wait 10 Seconds...
    2. Connect the USB Cable to the PHONE Micro USB Port
    3. Connect the USB Cable to the PC USB Port

    Communication Link Established!
    Reading Product Info...

    Product Code : RX-51
    Hardware Revision : 2101
    Software Release : RX-51_2009SE_21.2011.38-1_PR_MR0
    Software Platform : MAEMO

    Sending xloader (14848) bytes...
    Sending secondary (109440) bytes...
    Sending kernel (1746688) bytes...
    Sending cmt-2nd (81408) bytes...
    Sending cmt-algo (519808) bytes...
    Sending cmt-mcusw (5966464) bytes...
    Sending rootfs (190185472) bytes...

    ERROR: Invalid Programming Status Received!

    Booting/Flashing Failed...
    Please Try Again...

  2. #2
    GSM Expert Ekran's Avatar
    Clan br.
    757
    Registrovan
    Feb 2006
    Lokacija
    www.ekranservis.co.rs
    Godina
    35
    Br. postova
    1.706
    Hvala
    99
    Pohvaljen 196 puta u 140 postova
    taj ATF ga nikada nije radio kako treba, fleshuj ga na UB ako imas

  3. #3
    GSM Potencijal
    Clan br.
    11461
    Registrovan
    Jun 2008
    Lokacija
    kraljevo
    Br. postova
    40
    Hvala
    7
    Pohvaljen 3 puta u 3 postova
    imas i njegov flasher pa probaj sa njim.

Slicne teme

  1. n900 ploca ili telefon
    Postovao Deki u forumu Potraznja
    Odgovori: 0
    Zadnji post: 05-07-11, 16:25
  2. E250 nakon flash nema mrezu
    Postovao compart u forumu NS Pro
    Odgovori: 3
    Zadnji post: 08-12-10, 21:09
  3. N900 gasi lcd posle 5-10 sekundi
    Postovao saolinac u forumu BB5 modeli
    Odgovori: 0
    Zadnji post: 26-08-10, 15:06
  4. N900 rx-51 V3.2010.02-8
    Postovao Eprom u forumu BB5 modeli
    Odgovori: 4
    Zadnji post: 22-04-10, 17:54
  5. V3xx nakon flasha ostala u flash modu
    Postovao gjurobrod u forumu Motorola P2K
    Odgovori: 11
    Zadnji post: 05-08-09, 12:24

Pravila postovanja

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •