Prikazivanje rezultata 1 do 5 od 5

Tema: LG GT 540 Flesh File

  1. #1
    GSM Potencijal Kole Prijepolje's Avatar
    Clan br.
    2657
    Registrovan
    Nov 2006
    Lokacija
    Prijepolje
    Br. postova
    53
    Hvala
    21
    Pohvaljen 19 puta u 11 postova

    LG GT 540 Flesh File

    Da li ima neko za navedeni model file?Nebitno na kom jeziku,na www.lgtool.net nema trazio..hVALA

  2. #2
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Mozda moze ovo da pomogne

    CyanogenMod 6.1/Android 2.2 Is here for GT540!

    --------------------------------------------------------------------------------

    *Please make sure you read the instructions properly!! People are replying to this post saying the problems they're having when the answer is that they didn't read the post properly. If you are having problems, then refer back to the instructions and make sure you followed the steps EXACTLY as they're written. Thanks!

    Make a backup of your 2.1 ROM before you update in case you want to go back to 2.1/you are having problems with 2.2. To do this, flash your phone with the fastboot ROM and install recovery via the instructions below, then go to recovery and make a backup of the current 2.1 ROM to restore back to if you have any problems

    Update: Recovery is now included in the .zip file as an optional install, instructions are updated!

    Quarx and ankuch from 4pda.ru are working on porting CyanogenMod 6.1 Android 2.2.1 to the LG GT540, it's available to download although it's still in beta stage so there are a few bugs in it.
    Here's the list from the site saying what works and doesn't (I'll update this list as they do):
    What's working: Wifi, GSM (Mobile Data), Camera (photo / video in 3GP), Bluetooth (receiving / sending files / HID), Video Codec (Hardware only H264), stereo audio to the headset, 3D accelerator, detectors, GPS / AGPS, navigate base stations, installing programs on a flash drive (Apps2SD).
    What does not work: Fm-Radio, Camera (Video in H264/MP4), Codecs (XVID, DIVX)

    Changelog:


    http://goo.gl/BsHJG


    Boot v1.5 & System v4.4 (approximately 19chislo):
    CyanogenMod 6.1.2
    Fixed operation of MMC.
    Fixed loud svzya.
    Fixed volume in the headset during a call.
    Added support for IPv6 and tun.ko
    Updated Google Apps ...
    Counting the charge is now correct.
    Adjusting the volume at off-screen. (Thanks syaupin , the firmware though slightly different keychar)
    Key focus of the camera.
    Fix retry ringtones.
    Hosts for ad blocking.
    Added Java Emulator
    Skorocti may increase / stability GPRS/3G - not a test.

    Boot v1.4 & System v4.3:
    Codecs - H264 c hardware acceleration .... others must work in software.
    Added support for camera with video recording has a problem.
    Bluetooth works for file transfer, the reception is not working. Audio transmission is not tested (no headset)
    Launcher by default from 2.2.1
    Effects of the screen work again.
    Lock screen during incoming and outgoing calls.
    Added HomeSelector
    Was converted video subsystem that may fall in the ben#####k results.

    Boot v1.3 & System v4.2:
    Codecs - Maybe not all videos will play without the player - at the stage of testing.
    Returned RootExplorer
    Fix the headset button
    ADW replaced by the Launcher from 2.3.
    Correction of 3D and 600MHz.
    Stereo audio to the headset.
    Update CM to 6.1.1
    Added support for additional languages.
    Boot v1.1 & System v4.1:

    Added support for GPS / AGPS, navigate to the base stations.
    WiFi is now activated and works immediately.
    USB flash drive is mounted correctly. Condition: FAT must be the first.
    Added the ability to install software on a flash drive.
    Profile frequency control - ONDEMAND.


    Buglist:





    1. If the flash drive, for whatever reason, does not mount, then through the ADB, give the command: "mount-t vfat-o utf8, umask = 000, rw / dev/block/mmcblk0p1 / sdcard" and then "Settings / Memory / SD-Connect card .
    2. Posle use USB-drive, flash drive does not automatically mount: a solution to in paragraph 1, or simply restart the device.
    3. Reboot in Recovery menu does not work.
    4. Synchronise with PC Suite will not work
    5. Adobe Flash Player does not work! only FlashLite works!


    LG GT540 CyanogenMod <--- A link to all the files I used for CyanogenMod 6 + 7

    Make sure you follow the instructions exactly as they're written. As always, with flashing your phone, there's always the risk of bricking your phone. I'm not responsible for anything that happens to your phone because of flashing custom firmware. But I will do my best to try and help you with any problems you might encounter


    To install this ROM you need to have fastboot enabled on your phone. If you have Android 1.6/2.1 installed from LG, then fastboot is not enabled. I will explain how to enable fastboot on your phone (this involves re-flashing/replacing your currently installed firmware):

    KDZ Updater CarphoneWarehouse Unlocked.zip - A link to a zip archive with all the files needed to flash Android version 2.1 with fastboot (Carphone Warehouse Unlocked)

    KDZ Updater Europe Open.zip - A link to a zip archive with all the files needed to flash Android version 2.1 with fastboot (Europe Open)

    Download the version that best applies to you, if you live in the UK, I'd recommend you download the Carphone Warehouse Unlocked version, whereas if you live in Europe, I'd recommend the Europe Open version (simple right? )

    Now, how to flash these versions; I'll explain in detail how to flash the ROM's from starting with backing up.

    Instructions to install ROM with Fastboot:





    1. Before you start, make sure you backup all your data by installing the z4root.1.3.0.apk file onto your phone, then open it and choose 'Permanent Root'. Your phone will root and reboot. Then go to the Market and install 'MyBackup Root', open it and do a backup of your apps and personal data (contacts, sms, call log etc.) Once this is done, go to Settings>SD Card and Phone Storage>Unmount SD Card, a notification in the notification bar should appear saying 'SD Card safe to remove'. Remove the battery cover and remove the SD card and store it in a safe place. Then continue to step 2.

    2. Extract the .zip file you downloaded to your computer (e.g. your desktop). Open the folder and install MSXML 4.0 SP3 Parser (msxml.msi).

    3. Once that has finished, install LGAndroidDriver_WHQL_ML_Ver1.0_All_Win7.exe which are the drivers so your computer will recognize your phone. Windows XP Users download this driver, extract the contents anywhere (e.g. desktop), right-click on the 'android_usb.inf' file and click 'Install'.

    4. Next, open KDZ_FW_UPD.exe
    (i) Change 'Type' to '3GQCT' *THIS IS A MUST, THE UPDATE WILL NOT WORK OTHERWISE AND YOU MAY BRICK YOUR PHONE*
    (ii) Make sure 'PhoneMode' is set to 'DIAG'
    (iii) Browse for the 'V20B_00+Fastboot.kdz' file.

    5. Prepare the phone by enabling USB Debugging by going to Settings>Applications>Development>Enable USB Debugging, then make sure 'Mass Storage Mode' is off in Settings>SD Card & Phone Storage and connect the phone to the computer via USB cable and wait for the drivers to install for the phone.

    6. Click 'Launch software update' and do not use your computer until the update is complete. The update will take roughly 10-20 mins to complete.


    Instructions to install CyanogenMod:





    NEW! I've created an automatic .exe file that will automatically install CyanogenMod to your phone with little effort on your part! The only instruction you need to do is connect the phone in fastboot mode, that's it! http://www.mediafire.com/?kdttz5s9i95k4rk Here's the link!

    However, if you prefer to install manually, here are the instructions:

  3. #3
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Once the update is complete, your phone will reboot, what you need to do is power off the phone and whilst the phone is off, press and hold the 'Camera' button all the way and power on the phone, make sure you hold the 'Camera' button. The phone will display the LG logo and disappear, then display a blank screen. The phone is now in fastboot mode!

    Now you want to download this file: Flashing CyanogenMod.zip and extract it to a folder called 'Android' (without the quotes '') on the C: drive (you'll probably need to make this folder yourself.

    1. Now open CMD with administrator privileges (Search for CMD in the start menu and right click on 'cmd' and click 'Run as Administrator' )

    2. Connect the phone to your computer via USB cable and wait for the necessary drivers to install. If the drivers can not be found or installed then download this and extract it to somewhere on your PC, then plug your phone into the computer and when it asks to install the drivers, point it to the path where you extracted the drivers to.

    3. Then go back to the cmd window and type:

    Code:
    cd C:\Android(i) Then type:

    Code:
    fastboot.exe -w(ii) Once that's completed, type:

    Code:
    fastboot.exe erase system(iii) Once that's completed, type:

    Code:
    fastboot.exe flash system system.img(iv) Once that's completed, type:

    Code:
    fastboot.exe flash boot boot.img(v) Once that's completed, type:

    Code:
    fastboot.exe reboot(v) To install recovery (optional) type:

    Code:
    fastboot.exe flash recovery recovery_clockwork_2.5.1.8_swift.img4. Your phone will now reboot with CyanogenMod 6.1.1 (Android 2.2.1). The first boot might take longer than a normal boot.

    5. You can now re-insert your SD card and go to Settings>SD Card and Phone Storage>Mount SD Card


    Enjoy!

    The instructions for flashing both the firmware with fastboot and flashing CyanogenMod are included in the zip archives called 'Readme'. I'll update the links so that you'll always have the most up to date version of CyanogenMod available for download, note that if you choose to update your phone you will loose all your data including apps etc. so backup before you update

    Original post: LG GT540 - Ïðîåêò OpenSwift -Ïðîøèâêà (OS 2.2.1) - 4PDA

    Restoring back to 2.1:





    If you are experiencing problems with the 2.2 ROM or just aren't to fond of it, you can restore back to 2.1 using this method (Thanks Djolle for the instructions!):

    Connect the phone via fastboot and type:

    Code:
    fastboot.exe -wThen type:

    Code:
    fastboot.exe reboot(as soon LG logo appear press and keep pressed volume down button and power button) - you'll get download mode, then connect to PC USB cable.

    Then flash original 2.1 ROM using KDZ_FW_UPD as normal (but you can do this from now on ONLY with fastboot enabled roms).

    (But why would you want to go back to 2.1 anyway? )


    ClockworkMod Recovery:





    You can now install ClockworkMod Recovery to your LG GT540 without reflashing everything again! Just download the .img file from here, put your phone into fastboot mode again (Hold the camera button at power on) and open cmd again and type:
    Code:
    cd C:\Androidthen type:
    Code:
    fastboot.exe flash recovery recovery_clockwork_2.5.1.8_swift.imgand to reboot:
    Code:
    fastboot.exe reboot.

    To access recovery, hold the home button whilst powering on, keep holding it while the LG logo appears, it'll then take you to the ClockworkMod Recovery screen, use the volume up + down buttons to navigate around the menu, the call button to 'click' or 'enter' and the power button to go back. From the recovery menu you can flash update.zip from the memory card and make nandroid backups of your device (a nandroid backup is a complete backup of your phone's internal drive, which you can restore at a later point if anything goes wrong). For more info on what ClockworkMod Recovery can do, do a Google search for 'ClockworkMod Recovery' (link here)




    How to restore the boot logo's so you can get into recovery:





    Thanks to thel2dab for these instructions!

    1. Download the KDZ updater from here if you haven’t already done so.

    2. Download these two files:
    French v20a.KDZ
    out.kdz

    3. Remove the SD card, the battery and the SIM card.

    4. Press the Volume Down button and connect your USB cable this will put your phone into download mode.

    5. Next you need to open up device manager and go to modems and disable the LG Android USB modem.

    6. Now open up the KDZ updater:
    a. Check that ‘Type’ is set to '3GQCT' and ’PhoneMode’ is set to 'CS_EMERGENCY'.
    b. Then in the KDZ file box browse to and select the French KDZ file and click Launch software update. Wait for it to say finished.
    c. Unplug the USB cable before it the phone boots. Then plug your phone back in while pressing the ’Volume Down’ button again, this time the screen will say download mode.
    d. Go back to the KDZ updater and check that ’Type’ still says ’3GQCT’ and ’PhoneMode is still set to ’CS_EMERGENCY’
    e. Browse to the out.kdz file and click launch software update] wait for it to say finished.
    f. Remove the USB cable, put the battery back in and start the phone it will get to the Android boot logo but that’s it.
    7. Plug the USB cable back in and go back to the KDZ updater and change ’PhoneMode’ to ’DIAG’
    a. Browse to either the Carphone Warehouse KDZ + fastboot or the EuropeOpen KDZ + fastboot and click launch software update
    8. When it says finished turn off the phone and boot into fastboot mode (hold ’Camera’ and power on the phone) and install Cyanogenmod 7 (instructions above).


    Gingerbread theme:
    Before starting, make a full backup of your phone via recovery! To do this, go to recovery by holding the 'Home' button on powerup, then go to 'backup and restore' then choose 'backup'.

    http://goo.gl/sJyEm
    http://goo.gl/BOcYT
    http://4pda.ru/forum/index.php?showtopic=202696

  4. Sledeci korisnici su rekli hvala Eprom za ovaj koristan post:


  5. #4
    GSM Potencijal Kole Prijepolje's Avatar
    Clan br.
    2657
    Registrovan
    Nov 2006
    Lokacija
    Prijepolje
    Br. postova
    53
    Hvala
    21
    Pohvaljen 19 puta u 11 postova
    Zavrseno Hvala puno

  6. #5
    GSM Junior
    Clan br.
    6485
    Registrovan
    Jun 2007
    Lokacija
    bgd
    Godina
    46
    Br. postova
    12
    Hvala
    0
    Pohvaljen 1 put u 1 postu
    samo pazite da nepukne onda nema pomoći,ili ako zablokira prilikom unosa podataka za šifru

Slicne teme

  1. J770 flesh file
    Postovao tzlatko u forumu UST Pro II
    Odgovori: 3
    Zadnji post: 19-03-09, 11:06
  2. Z320 flesh file
    Postovao tzlatko u forumu SEtool support forum
    Odgovori: 5
    Zadnji post: 04-09-08, 07:30
  3. MT Box i USB flesh
    Postovao tzlatko u forumu MT Nokia
    Odgovori: 8
    Zadnji post: 10-06-08, 08:44
  4. Sharp 902 Flesh file need
    Postovao Zoro u forumu Sharp
    Odgovori: 5
    Zadnji post: 30-12-06, 14:18

Pravila postovanja

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •