Prikazivanje rezultata 1 do 3 od 3

Tema: N73 mrtva nakon flesanja cyclonom

  1. #1
    GSM Master
    Clan br.
    899
    Registrovan
    Feb 2006
    Lokacija
    Cakovec
    Godina
    50
    Br. postova
    301
    Hvala
    0
    Pohvaljen 10 puta u 9 postova

    N73 mrtva nakon flesanja cyclonom

    pokusao sam flesat ponovno sa hwk jafom ali nista cyclon odradi sve do kraja ali zapne kod red info ima li resenje trazio sam po netu ali nista konkretno radio sam easy cablom

    Booting CMT...
    APE_SYSTEM_ASIC_ID: 17100708
    APE_ASIC_MODE_ID: 00
    APE_PUBLIC_ID: 4C771E5BC6541B9CF40230B3A62FA33A4346C7C2
    APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
    APE_BOOT_ROM_CRC: 1DFD6613
    APE_SECURE_ROM_CRC: 2C872FD4
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID: 00000295
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 03D00109C1A40154D5605CF577D87940999B44CE
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC: 273F6D55
    CMT_SECURE_ROM_CRC: DFAAF68F
    CMT Ready!
    N73_rofx_4.0812.4.0.1_PRD.V07, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1 ALG, BB5, BB5 ALGORITHM
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 100Kbits
    Using OLD BB5 FLASHING PROTOCOL
    FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
    FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
    Searching for BootCode: DualLine 32Bit
    helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
    FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
    FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC00A1 (Samsung), Size: 128MBytes, VPP: 21V
    h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1 ALG
    Box VPP disabled
    Internal APE Phone VPP Enabled
    PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
    Flashbus Write baud set to 5.0Mbits
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,APE]: 0x03920000-0x04E1FFFF, NAND
    Waiting 320s for erasure finish...
    Erase taken 0.312s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Writing APE SOS+ROFX Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 30.906s
    Flashing Speed: 4364,55 kBit/S
    Restarting MCU...
    Processing N73_userarea_4.0812.4.0.1.U01 (CMT)...
    Processing N73_userarea_4.0812.4.0.1.U01 (APE)...
    Booting CMT...
    APE_SYSTEM_ASIC_ID: 17100708
    APE_ASIC_MODE_ID: 00
    APE_PUBLIC_ID: 4C771E5BC6541B9CF40230B3A62FA33A4346C7C2
    APE_ROOT_KEY_HASH: 49A97E826B93BA20B7ED0B082475C00500000000
    APE_BOOT_ROM_CRC: 1DFD6613
    APE_SECURE_ROM_CRC: 2C872FD4
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101003000
    CMT_EM_ASIC_ID: 00000295
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 03D00109C1A40154D5605CF577D87940999B44CE
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC: 273F6D55
    CMT_SECURE_ROM_CRC: DFAAF68F
    CMT Ready!
    N73_userarea_4.0812.4.0.1.U01, Type: Flash Image, Algo: BB5, OMAP1710 UNISTORE-II-1.2.1 ALG, BB5, BB5 ALGORITHM
    Searching for BootCode: DualLine 32Bit
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.10.6.0, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 100Kbits
    Using OLD BB5 FLASHING PROTOCOL
    FlashChip[0,CMT]: 0x00EC22E800006921, Samsung, NOR
    FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC22E8 (Samsung), Size: 16MBytes, VPP: 9V
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.10.6.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
    Searching for BootCode: DualLine 32Bit
    helen3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.35.0, Algo: BB5
    FlashChip[0,APE]: 0x00EC00A100800015, Samsung, NAND
    FlashContent[0,APE]: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, NAND
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00EC00A1 (Samsung), Size: 128MBytes, VPP: 21V
    h3_sam_nand_xsr.fg, Type: Algorithm, Rev: 0.1.49.0, Algo: OMAP1710 UNISTORE-II-1.2.1 ALG
    Box VPP disabled
    Internal APE Phone VPP Enabled
    PAPUBKEYS Hash for APE: 5E8D0D504A0902E261268C14FCD8A2C9093523BC
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,APE]: 0x04E20000-0x07C9FFFF, NAND
    Waiting 320s for erasure finish...
    Erase taken 0.656s
    Writing all blocks...
    Initializing TurboCache...
    TurboCache Loaded!
    Programming Status OK!
    All blocks written OK! Time taken 7.516s
    Flashing Speed: 5714,11 kBit/S
    Restarting MCU...
    All images processed OK! Processing post flash tasks...
    Setting Factory Defaults...
    Factory defaults OK
    Reading info...
    Failed to read info -> Phone not detected

  2. #2
    Product Suporter Dr.Nele's Avatar
    Clan br.
    95
    Registrovan
    Oct 2005
    Lokacija
    Добој, Цара Душана 49
    Br. postova
    1.666
    Hvala
    434
    Pohvaljen 546 puta u 312 postova

  3. #3
    GSM Master
    Clan br.
    899
    Registrovan
    Feb 2006
    Lokacija
    Cakovec
    Godina
    50
    Br. postova
    301
    Hvala
    0
    Pohvaljen 10 puta u 9 postova
    Hvala Nele ja sam kod searsh ukucao n73 ali mi nije izbacio nista za taj telefon pa mi je bilo cudno zasto nema nesto o tom telefonu.

Slicne teme

  1. E66 mrtva nakon jezika!
    Postovao Vlada84 u forumu BB5 modeli
    Odgovori: 14
    Zadnji post: 01-03-11, 10:17
  2. N93 ubijen sa cyclonom
    Postovao Lipi u forumu BB5 modeli
    Odgovori: 8
    Zadnji post: 01-09-09, 14:17
  3. N95 eror kod flesanja
    Postovao Lipi u forumu BB5 modeli
    Odgovori: 17
    Zadnji post: 16-10-08, 14:33
  4. c130 kontrast problem nakon flesanja
    Postovao mmanduri u forumu UST Pro II
    Odgovori: 3
    Zadnji post: 23-06-07, 11:02
  5. Samsung P730 - nakon flesanja- MRTAV
    Postovao novack2 u forumu UST Pro II
    Odgovori: 13
    Zadnji post: 23-11-06, 23:44

Pravila postovanja

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •