Strana 5 od 13 PrviPrvi 123456789 ... PoslednjiPoslednji
Prikazivanje rezultata 161 do 200 od 481

Tema: Setool razno

  1. #161
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    @drbabic

    Moja greska sto nisam sve predhodno provjerio.Na PM mi posalji useer/pass od accounta i saljem 5 logova.

    p.s Skinuo si cid50 rest fajle sa support-a ?

  2. #162
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    Eto finalno, poslije par izgubljenih sati greska je do REST fajlova:

    Skinite db2010_2012_asahi_rest.rar sa supporta i uzivajte.

    Nema dranja nema mrtvih aparata samo morate voditi racuna da skidate novosti sa SUPPORT-a...

  3. #163
    GSM Senior drbabic's Avatar
    Clan br.
    580
    Registrovan
    Dec 2005
    Lokacija
    Mladenovac, Srbija
    Godina
    52
    Br. postova
    69
    Hvala
    1
    Pohvaljen 1 put u 1 postu
    Citiram Original postovao MobileLand
    @drbabic

    Moja greska sto nisam sve predhodno provjerio.Na PM mi posalji useer/pass od accounta i saljem 5 logova.

    p.s Skinuo si cid50 rest fajle sa support-a ?
    Skinuo sam sve rest fajlove. Hvala na savetima i podrsci, ali posto sam ostao bez jednog kredita na SeToolu nisam uspeo da probam ovu varijantu zajedno sa flesovanjem.
    Nije da je reklama za univerzal jer i on me ojadio ali ipak sam jos jednom probao sa njim, jer sam tu imao kredita i nakon jos 50 kredita TF je konacno prosao. Tako da sam TF uspesno dekodirao za 32.5 EV nakon 2-3 izgubljena sata. Zar nije dobar posao?!

  4. #164
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    Skinite db2010_2012_asahi_rest.rar i za svaki ubijeni k320 aparat CID50 (potrosili ste 1log) dajem 5 logova.
    Naravno, screenshoot je potreban...

    Pozdrav!

  5. #165
    GSM Potencijal -Ex-'s Avatar
    Clan br.
    6671
    Registrovan
    Jun 2007
    Lokacija
    Federacija
    Godina
    37
    Br. postova
    51
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    Isptavte me ako grijesim ali poslije ovakve procedure svaki je upalio i radio normalno....i naravno otkljucan






  6. #166
    GSM Potencijal
    Clan br.
    167
    Registrovan
    Oct 2005
    Lokacija
    BiH Tuzla
    Godina
    46
    Br. postova
    30
    Hvala
    0
    Pohvaljen 2 puta u 1 postu
    Imao sam isti probleb sa K510 CID50 i protrosio 5 logova sve dok nisam skinuo gore navedene rest fajlove (db2010_2012_asahi_rest.rar) sad sve radi OK i bez flesanja, znaci to problem 100% kako je gore i navedeno

  7. #167
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    Eto meni je stvarno zao sto ste trosili logove i 'ubijali' aparate.Al prvo pitanje je bilo da li ste skinuli rest fajle ili niste.
    Ispalo kod svih problematicnih slucajeva da korisnici nisu skinuli rest fajle.
    Takodje, da je makar neko od 'problematicnih' posao screenshoot ja bih znao sta je u pitanju.
    Izgleda da rekla-kazala na ovim prostorima postoji i u GSM svijetu...

    Kao sto ely rece, ko je ubijao cid50 aparate neka samo konacno skine rest fajle sa supporta, ili, kao -Ex- nek full flashuje aparat svaki put...

    Pozdrav!

    CLOSED

  8. #168
    GSM Expert Dr SEMA's Avatar
    Clan br.
    66
    Registrovan
    Sep 2005
    Lokacija
    KANDAHAR
    Br. postova
    2.528
    Hvala
    197
    Pohvaljen 659 puta u 314 postova

    K510/K320(ili uopste bilo koji CID50) neće da upali nakon unlocka

    v0.91380096/UNI
    Card serial:00001424
    Loaded 51 flash descriptors
    ChipID:8040,EMP protocol:0301
    NEW SECURITY MODEL DETECTED
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:50
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:50 PAF:1 IMEI:35668201535144 CERT:RED
    FLASH CID:50 COLOR:RED

    MAPP CXC article: R4EA031 prgCXC1250231_GENERIC_CO
    MAPP CXC version: R4EA031 JEL OVA VERZIJA PROBLEMATIČNA IAKO SAMO ONA POSTOJI KAO CID50
    Language Package:T_MOB_INT_B
    CDA article: CDA102460/76
    CDA version: R7A
    Default article: cxc1250246
    Default version: R4EA031

    Network LOCKED
    Operator: 219-01

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE znači rest je tu,trebalo bi da je ok,ili ipak????

    Elapsed:9 secs.
    SERVER SUPPORT ENABLED.
    ChipID:8040,EMP protocol:0301
    NEW SECURITY MODEL DETECTED
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:50
    Speed:921600
    OTP LOCKED:1 CID:50 PAF:1 IMEI:35668201535144 CERT:RED
    LDR:060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
    Flash ID check:897E
    Flash props sent ok
    bypassing DB2012 security...
    done,restarting...
    ChipID:8040,EMP protocol:0301
    NEW SECURITY MODEL DETECTED
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:50
    Speed:921600
    Trying to launch embedded bootloader...
    Embedded flashloader:
    COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R4EA031_CXC1250231_GENERIC_CO
    Restore from:R4EA031_CXC1250231_GENERIC_CO
    Searching...
    Firmware lock check determined.
    Unlock Done
    Elapsed:71 secs.



    Imao i prije problema,ali nisam se žalio,kažu bez loga ništa evo log pa da vidimo šta je problem,nakon toga uradim već opisanu proceduru kao i sa k320 i telefon radi,mrsko mi flešovati,šta je ovdje sad problem.
    Attached Images Attached Images

  9. #169
    GSM Expert Dr SEMA's Avatar
    Clan br.
    66
    Registrovan
    Sep 2005
    Lokacija
    KANDAHAR
    Br. postova
    2.528
    Hvala
    197
    Pohvaljen 659 puta u 314 postova
    v0.91380096/UNI
    Card serial:00001424
    Loaded 51 flash descriptors
    SERVER SUPPORT ENABLED.
    ChipID:8040,EMP protocol:0301
    NEW SECURITY MODEL DETECTED
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:50
    Speed:921600
    OTP LOCKED:1 CID:50 PAF:1 IMEI:35668201535144 CERT:RED
    LDR:060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
    Flash ID check:897E
    Flash props sent ok
    bypassing DB2012 security...
    done,restarting...
    ChipID:8040,EMP protocol:0301
    NEW SECURITY MODEL DETECTED
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:50
    Speed:921600
    Trying to launch embedded bootloader...
    Embedded flashloader:
    COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
    Flash ID check:897E
    Flash props sent ok
    FOUND: R4EA031_CXC1250231_GENERIC_CO
    Restore from:R4EA031_CXC1250231_GENERIC_CO
    writing D:\PROGRAMI OD BOXOVA\SETOOL_3\SE\K510_SEtool_jezik\K510_CID50_Se tool\R4EA031_1250231_GENERIC_CO.ssw
    CURRENT FLASH FILE CID:50
    SSW uses complete hash, hash len is:6540
    Will flash 327 blocks...
    SSW loading returns:0
    writing D:\PROGRAMI OD BOXOVA\SETOOL_3\SE\K510_SEtool_jezik\K510_CID50_Se tool\R4EA031_fs_S_E_EUROPE_co_Red_CID50.ssw
    CURRENT FLASH FILE CID:50
    SSW uses complete hash, hash len is:2180
    Will flash 109 blocks...
    SSW loading returns:0
    Searching...
    Firmware lock check determined.
    CSloader version:
    COMPACT_SEMC_FS_LOADER_SETOOL2_V26
    loader startup: executed
    loader filesystem startup: executed
    loader GDFS startup: executed
    loader unlock: executed
    writing tpa/preset/custom/C3_PCA_G3v2.cer
    writing tpa/preset/custom/CONTENT_DOWNLOAD_HOOK_2.itm
    writing tpa/preset/custom/customize.xml
    writing tpa/preset/custom/DESKTOP_HOOK_2.itm
    writing tpa/preset/custom/Entrust.net Root Certificate.cer
    writing tpa/preset/custom/Entrust.net_WTLS_Root_Certificate.wcrt
    writing tpa/preset/custom/FM_PICTURES_HOOK_3.itm
    writing tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
    writing tpa/preset/custom/FM_THEMES_HOOK_3.itm
    writing tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
    writing tpa/preset/custom/GAMES_HOOK_3.itm
    writing tpa/preset/custom/GTE_CyberTrust_Root.cer
    writing tpa/preset/custom/GTE_Cybe_Trust_Root_WTLS.wcrt
    writing tpa/preset/custom/Root.cer
    writing tpa/preset/custom/SEMC_E2E_Root_CA.crt
    writing tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
    writing tpa/preset/custom/ThawtePremium.der
    writing tpa/preset/custom/ThawteServerCA.cer
    writing tpa/preset/custom/Utiroot.cer
    writing tpa/preset/custom/VeriSignClass3Root.cer
    writing tpa/preset/custom/Verisign_Class_3_CA_WTLS.wcrt
    Phone detached
    Elapsed:354 secs.

    A evo repair i nakon ovoga aparat radi ko sat,apsolutno sve ????
    Attached Images Attached Images

  10. #170
    GSM Expert Dr SEMA's Avatar
    Clan br.
    66
    Registrovan
    Sep 2005
    Lokacija
    KANDAHAR
    Br. postova
    2.528
    Hvala
    197
    Pohvaljen 659 puta u 314 postova
    180 MB (189,427,033 bytes)

    ovo je veličina mog REST foldera,da li nešto fali????

    548 rest fajlova,da li neki nedostaje?????

    Volio bi da se ovo ne svati kao kritika ,već kao pokušaj otklanjanja postojećeg problema,ili je do nas usera ili do Lasera.

  11. #171
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    Savrseno se slazem Semireeee...

    krece naknadna provjera...

  12. #172
    GSM Expert Dr SEMA's Avatar
    Clan br.
    66
    Registrovan
    Sep 2005
    Lokacija
    KANDAHAR
    Br. postova
    2.528
    Hvala
    197
    Pohvaljen 659 puta u 314 postova
    OK OK kao što kažeš postoji mogućnost poklapanja restova...
    treba upakovati samo restove za cid50 i samo njih staviti u rest folder odvojeno sa softverom pa probati šta se onda dešava,imam nekih 30 komada na dekodiranju K510 cid50 pa tako da stojim sa aparatima na raspolaganju,kredite takođe ne tražim da se nadoknade (poklanjam) samo predložite nešto ili dajte upakovane u jedan folder samo restove za cid50 pa da se proba samo sa njima

  13. #173
    GSM Expert Dr SEMA's Avatar
    Clan br.
    66
    Registrovan
    Sep 2005
    Lokacija
    KANDAHAR
    Br. postova
    2.528
    Hvala
    197
    Pohvaljen 659 puta u 314 postova
    Evo trenutno-privremeno rešenje problema,dok čika Laser ne riješi generalno
    napravite kopiju kompletnog foldera v0.91380096 zatim u njemu izbrišete u folderu REST sve rest fajlove i samo kopirate db2010_2012_asahi_rest u rest folder bez ostalih rest fajlova i bez problema dekodirate pomenute modele,a napravite ovako kao na slici dva foldera jedan komplet sa svim restovima a drugi samo sa ASAHI restovima za DB2012 i po potrebi koristite koji vam treba.
    Attached Images Attached Images
    Izmenio Dr SEMA : 11-09-07 u 16:36 Razlog: izmjena slike

  14. #174
    GSM Junior
    Clan br.
    3085
    Registrovan
    Dec 2006
    Lokacija
    ured za istrazivanje ruda i gubljenje vremena
    Br. postova
    27
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    imao sam taj problem, probat ću baš sutra tvoju soluciju...thx

  15. #175
    GSM Master Luc+Luc's Avatar
    Clan br.
    1599
    Registrovan
    Jun 2006
    Lokacija
    B i H, Kiseljak - Wine
    Godina
    37
    Br. postova
    636
    Hvala
    5
    Pohvaljen 2 puta u 2 postova
    Svaka cast! Sreca pa se meni ovo nije desilo . Ovakve nelogicne stvari me vrlo brzo dovedu do ruba zivaca!
    Pozdrav

  16. #176
    GSM Guru service_mobeliks's Avatar
    Clan br.
    4217
    Registrovan
    Mar 2007
    Lokacija
    Bosanski Brod
    Br. postova
    167
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    ev i ja roknu jednog, rjesen sa pravljenjem ovog novog foldera kao sto je dr.sema objasnio !!

  17. #177
    GSM Potencijal
    Clan br.
    582
    Registrovan
    Dec 2005
    Lokacija
    BiH Zenic ON-OFF
    Godina
    53
    Br. postova
    51
    Hvala
    0
    Pohvaljen 16 puta u 8 postova
    Svaka cast DR SEMA!!!

  18. #178
    GSM Guru wellerelc's Avatar
    Clan br.
    347
    Registrovan
    Nov 2005
    Lokacija
    ...wellerelc team...srebrenik
    Godina
    44
    Br. postova
    193
    Hvala
    7
    Pohvaljen 5 puta u 1 postu
    nije on džaba DR.SEMA !!!!

  19. #179
    GSM Potencijal Electronic's Avatar
    Clan br.
    5012
    Registrovan
    Apr 2007
    Lokacija
    BiH Lukavac
    Godina
    40
    Br. postova
    37
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    evo meni prodje bez pravljenja foldera

  20. #180
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    Normalno ide i bez pravljenog foldera.Bitni su samo zadnji rest.
    Pozdrav!

  21. #181
    GSM Expert Dr SEMA's Avatar
    Clan br.
    66
    Registrovan
    Sep 2005
    Lokacija
    KANDAHAR
    Br. postova
    2.528
    Hvala
    197
    Pohvaljen 659 puta u 314 postova
    postoje dvije "istine" nekom ide nekom ne ide,kome šta odgovara neka se posluži,meni a i nekim kolegama nije išlo,Laser se kleo u svu djecu ispred škole da mu ide ,kako god bitno je da radi,ili ovako ili onako
    BR

  22. #182
    GSM Guru
    Clan br.
    5934
    Registrovan
    May 2007
    Lokacija
    HR Kuti
    Godina
    42
    Br. postova
    202
    Hvala
    27
    Pohvaljen 27 puta u 18 postova
    Koje restove staviti a da budu kompletni (za nove i stare) ili se trebaju skinuti ama bas svi.ne koristim se tool bas precesto!
    Attached Images Attached Images

  23. #183
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    Citiram Original postovao kicma
    ne koristim se tool bas precesto!
    Greska

    Skini sve i sve prekopiraj u 'rest' folder setool_card, rest.
    Zadnje kopiraj 'asahi rest' fajle.

  24. #184
    GSM Guru
    Clan br.
    5934
    Registrovan
    May 2007
    Lokacija
    HR Kuti
    Godina
    42
    Br. postova
    202
    Hvala
    27
    Pohvaljen 27 puta u 18 postova
    OK.Evo skidam sve, pa sve u rest folder.
    smijem li obrisati postojece rest filove,jer vise ni sam neznam sto imam a sto nemam, a da ovi skinuti pokrivaju sve (stare i nove) modele?

  25. #185
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    Zadnje iskopiras 'asahi' rest.I kad te pita dal da zamjenis postojece klikni 'yes,all' .
    Ili, iskoristi semino istrazivanje i 'asahi' restove smjesti u poseban dir.

    Pozdrav!

  26. #186
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova

    A2/Cid52/cid53/pnx5230 Dekodiranje !!!

    U kratkome:

    -povezati upaljen telefon na DCU60 radi instalacije drivera (mozete ih pronaci u phones folderu ili na windows update sajtu - stiklirati da vam sam windows pronadje driver-e na netu)
    - odabrati model
    - cekirati samo use server i do full unlock
    - uneti ispravno korisnicko ime i lozinku (minimum 10 logova na account-u mora postojati)
    - vratiti se na SE tab i snimiti profil
    - kliknuti unlock/repair
    - povezati ugasen telefon na DCU60 kabl ( drzati C )
    - sacekati da se potrebna procedura zavrsi
    - SETool ce prijaviti da je log poslat na kalkulaciju
    - sacekati odredjen period (od 30 minuta pa nadalje) nakon cega je potrebno ponovo kliknuti unlock/repair da bi se stanje kalkulacije proverilo
    - ukoliko je kalkulacija zavrsena SETool ce to prijaviti i zatraziti od vas da upalite aparat ( pratite log prozor u SW-u)

  27. #187
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova

    Malo sire uputstvo !!!

    Q: How to PERMANENT unlock from network A2/DB2020/DB2012/DB2001/PNX5230 phone ?

    A:
    first, download latest version, special server support started from v0.913902.
    select USB as interface. that is REQUIRED.
    select phone model
    settings - check "use server for csca unlock/flash", "do full unlock instead of usercode reset", fill your login details.

    back to semc tab, press unlock, attach phone with pressed "C" buttons.

    if you have enough credits - you will receive next message
    "SIGNATURE QUEUED FOR CALCULATION, CHECK BACK LATER"

    (that means signature is added to calculation queue. calculation can take up to 3 days.
    if after 3 days (72 hours) signature will NOT be calculated - credits will be automatically returned
    when you press "info" or add another phone to queue.)

    (if you receive next message "QUEUE FULL, CHECK BACK LATER",
    that means all slots for calculations filled up and you need try again later)

    now - leave that phone aside for some time and check back periodically
    (NOT each 5 min , but each 60 min )

    if signature is calculated - you will receive 'SUCCESS' response, otherwise you will receive
    "%YOUR_IMEI% ALREADY IN QUEUE" - that means signature is in calculation queue.

    if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory.

    next, backup will be created so you will be able to restore phone if something will go wrong
    (hardly believe, but who knows...)

    next, you will be prompted to detach phone and turn it on.
    do so.
    detach phone.
    turn it on FULLY
    phone will be on 5 locks, that is normal.
    connect phone to usb.
    if phone will ask you switch to phone mode - switch to phone mode.
    it can ask you for drivers,if you not installed them previously.
    install all needed phone drivers (phones.rar on support area)
    be SURE that you install all drivers correctly.
    press "testpoint ok"

    note: in latest setool2 version phone will be searched constantly on all
    available comports until it will be found. So, you not need to press "TESTPOINT OK"

    procedure will continue,phone will be switched off and unlocked.

    remember, if something will go wrong - you have a backup of security units.

    cost of DB2020 unlock is 10 credits. it divided into 2 steps:
    signature calculation 6 credits (charged once), phone unlock - 4 credits
    (charged once, if by accident, server is recharging while you executing unlock, credits NOT charged)

    as usual, credits will NOT be recovered in case of connection failures. (error 10054,10060).
    that is NOT terms for discussion.

    NOTE! there is STILL REMAIN USERCODE RESET FOR DB2020/DB2012/PNX5230.

    it will work, if you UNCHECK option "do full unlock instead of usercode reset" and press UNLOCK.

    note: i STRONGLY recommend you to instal PHONE drivers BEFORE starting unlock procedure.

  28. #188
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova

    Uputstvo jos malo sire !!!

    -connect turned on phone to DCU60 cable and install ‘phone’ drivers (drivers for all phones can be found on the support page, /software files/phones.rar )
    -chose the model
    -in settings tab check ‘use server’ & ‘do full unlock’ options
    -enter valid username and password and chose your server (ask reseller about server info)
    -go back to SE tab and click on ‘save profile’ button
    -press ‘Unlock/Repair’ button
    -turn off phone, press and keep C button on phone and put it on DCU60 cable (install the drivers if not already installed - the drivers can be found at setool_card / drivers/ usb_flash_driver )
    -wait until the procedure is done
    -SETool will report the log is sent for calculation
    -wait a certain period (from 30 minutes to 72 hours – if the log will not be calculated in 72 hours you’ll automatically get your logs back on your account) and click Unlock/Repair again (phone again must be attached in usb flash mode) . SETool soft will show you if the log is calculated or you must wait further
    -when the calculation is done SETool will report it and ask from you to turn on the phone and attach it to DCU60 cable .Wait until the procedure is done




    -connect turned on phone to DCU60 cable and install ‘phone’ drivers (drivers for all phones can be found on the support page, .../software files/,phones.rar file or via windows update )
    -chose the model
    -in settings tab check ‘use server’ & ‘do full unlock’ options
    -enter valid username and password (10 credits MUST be available on account) and chose your server (ask reseller about server info)
    -go back to SE tab and click on ‘save profile’ button
    -press ‘Unlock/Repair’ button
    -connect turned off phone (press C button on phone) to DCU60 cable (install the drivers if not already installed, drivers can be found at setool_card / drivers/ usb_flash_driver )
    -wait until the procedure is done
    -SETool will report the log is sent for calculation
    -wait a certain period (from 10 minutes to 72 hours – if the log will not be calculated in 72 hours you’ll automatically get your logs back on your account) and click Unlock/Repair again (phone again must be attached in usb flash mode) . SETool soft will show you if the log is calculated or you must wait further
    -when the calculation is done SETool will report it and ask from you to turn on the phone and attach it to DCU60 cable .Wait until the procedure is done

    Please check how the log should look (when the log is calculated and waiting on the server):

    SERVER SUPPORT ENABLED.
    ChipID000,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:51
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI:35xxxxxxxxxxxx CERT:RED
    LDR:061120 1602 HANCXC1720441_R2A016_PNX5230_FLASHLOADER
    Flash ID check:897E
    Flash props sent ok
    CSloader version:
    070503 1431 HANCXC1250610_R3A015_PNX5230_CSLOADER
    Executing CSCA-based unlock.
    Asking for EROM signature...
    Waiting for calculation process...
    RESPONSE: "SUCCESS" (103
    loader startup: executed
    loader GDFS startup: executed
    loader unlock: executed
    Backup security data...
    Erasing locks...
    DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN.
    BE SURE THAT YOU SET PHONE IN "PHONE MODE"
    IF ASKED, INSTALL PHONE DRIVERS
    SEARCHING FOR PHONE, "STOP" TO ABORT
    PHONE FOUND AT COM5
    phone ready to proceed.
    Connecting to server
    seed is:0004F022
    Phone succefully unlocked. USERCODE reset to "0000"
    Elapsed:50 secs.

    The log is made on Z310 phone.


    Also, please check the video manuals which can be found at
    http://www.setool.org/video_tutorials.php

    The manual1 (no drivers previously installed) will show you the procedure if you don’t install the drivers previously.
    The manual2 (correct unlock) will show you the procedure when the drivers are installed before the unlock procedure (highly recommended to be done ).


    One more thing !

    When you get this ‘error’ message:

    SERVER SUPPORT ENABLED.

    ChipID:8040,EMP protocol:0301
    NEW SECURITY MODEL DETECTED
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI:35xxxxxxxxxxxxx CERT:RED
    LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
    Flash ID check:2019
    Flash props sent ok
    CSloader version:
    070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009
    Executing CSCA-based unlock.
    Asking for EROM signature...
    Waiting for calculation process...
    RESPONSE: "35xxxxxxxxxxxxx ADDED TO QUEUE,CHECK BACK LATER" (1)
    SIGNATURE QUEUED FOR CALCULATION, CHECK BACK LATER
    signature calculation not done,err: 26
    Elapsed:12 secs.

    Or


    SERVER SUPPORT ENABLED.
    ChipID:8040,EMP protocol:0301
    NEW SECURITY MODEL DETECTED
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI: 35xxxxxxxxxxxxx CERT:RED
    LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
    Flash ID check:2019
    Flash props sent ok
    CSloader version:
    070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009
    Executing CSCA-based unlock.
    Asking for EROM signature...
    Waiting for calculation process...
    RESPONSE: "35xxxxxxxxxxxxx ALREADY IN QUEUE" (15)
    MSG: "35xxxxxxxxxxxxx "
    signature calculation not done,err: 26
    Elapsed:9 secs.

    …it means all is O.K but your phone log is still not calculated and you must wait more time.

  29. #189
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova

  30. #190
    GSM Master Luc+Luc's Avatar
    Clan br.
    1599
    Registrovan
    Jun 2006
    Lokacija
    B i H, Kiseljak - Wine
    Godina
    37
    Br. postova
    636
    Hvala
    5
    Pohvaljen 2 puta u 2 postova
    Odlicne vijesti!

  31. #191
    GSM Master dejo's Avatar
    Clan br.
    75
    Registrovan
    Oct 2005
    Lokacija
    Down Under
    Godina
    48
    Br. postova
    719
    Hvala
    3
    Pohvaljen 14 puta u 11 postova


    Opening box.
    There is 1 ftdi devices
    no ufs boxes...
    v0.91380098/UNI
    Card serial:0000000x
    Loaded 51 flash descriptors
    SERVER SUPPORT ENABLED.
    ChipID000,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI:35756001294753 CERT:RED
    LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER
    Flash ID check:897E
    Flash props sent ok
    CSloader version:
    070503 1431 HANCXC1250610_R3A015_PNX5230_CSLOADER
    Executing CSCA-based unlock.
    Asking for EROM signature...
    Waiting for calculation process...
    RESPONSE: "35756001294753 ADDED TO QUEUE,CHECK BACK LATER" (1)
    SIGNATURE QUEUED FOR CALCULATION, CHECK BACK LATER
    signature calculation not done,err: 26
    Elapsed:4 secs.
    SERVER SUPPORT ENABLED.
    ChipID000,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI:35756001294753 CERT:RED
    LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER
    Flash ID check:897E
    Flash props sent ok
    CSloader version:
    070503 1431 HANCXC1250610_R3A015_PNX5230_CSLOADER
    Executing CSCA-based unlock.
    Asking for EROM signature...
    Waiting for calculation process...
    RESPONSE: "35756001294753 ALREADY IN QUEUE" (15)
    queued on server:"35756001294753"
    signature calculation not done,err: 26
    Elapsed:4 secs.
    SERVER SUPPORT ENABLED.
    ChipID000,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI:35756001294753 CERT:RED
    LDR:070212 1651 GENCXC1720441_R2A019_PNX5230_FLASHLOADER
    Flash ID check:897E
    Flash props sent ok
    CSloader version:
    070503 1431 HANCXC1250610_R3A015_PNX5230_CSLOADER
    Executing CSCA-based unlock.
    Asking for EROM signature...
    Waiting for calculation process...
    RESPONSE: "SUCCESS" (1038)
    loader startup: executed
    loader GDFS startup: executed
    loader unlock: executed
    Backup security data...
    Erasing locks...
    DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN.
    BE SURE THAT YOU SET PHONE IN "PHONE MODE"
    IF ASKED, INSTALL PHONE DRIVERS
    SEARCHING FOR PHONE, "STOP" TO ABORT
    PHONE FOUND AT COM110
    phone ready to proceed.
    Connecting to server
    seed is:009CE61D
    Phone succefully unlocked. USERCODE reset to "0000"
    Elapsed:62 secs.

  32. #192
    pinba
    Guest
    koliko vuce logova to dekod,verovatno 10 da bude cena kao na ub???

  33. #193
    GSM Master dejo's Avatar
    Clan br.
    75
    Registrovan
    Oct 2005
    Lokacija
    Down Under
    Godina
    48
    Br. postova
    719
    Hvala
    3
    Pohvaljen 14 puta u 11 postova
    Upravo tako, samo za sad je puno brze nego na UB, od slanja loga do unlocka oko 6 minuta, taman dok sam otiso do trgovine po cigare

  34. #194
    GSM Master GSMBoriss's Avatar
    Clan br.
    1703
    Registrovan
    Jun 2006
    Lokacija
    Kikinda
    Godina
    35
    Br. postova
    535
    Hvala
    104
    Pohvaljen 77 puta u 32 postova
    odlicna vest svaka cast!!!

  35. #195
    GSM Senior dime's Avatar
    Clan br.
    1319
    Registrovan
    May 2006
    Lokacija
    Negotino- Makedonija
    Godina
    55
    Br. postova
    94
    Hvala
    2
    Pohvaljen 3 puta u 3 postova
    [QUOTE=dejo]

    Opening box.
    There is 1 ftdi devices
    no ufs boxes...
    v0.91380098/UNI
    Card serial:0000000x
    Loaded 51 flash descriptors
    SERVER SUPPORT ENABLED.
    ChipID000,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52

    Dejo gde nadje ovu verziju setool-a

  36. #196
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    [quote=dime]
    Citiram Original postovao dejo


    Opening box.
    There is 1 ftdi devices
    no ufs boxes...
    v0.91380098/UNI
    Card serial:0000000x
    Loaded 51 flash descriptors
    SERVER SUPPORT ENABLED.
    ChipID000,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52

    Dejo gde nadje ovu verziju setool-a
    Pa na supportu druze.

  37. #197
    GSM Guru
    Clan br.
    56
    Registrovan
    Sep 2005
    Lokacija
    EX JUGA
    Godina
    50
    Br. postova
    218
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    Ali nažalost zahvala je uvik na kraju i najmanjim slovima piše

    Thanks goes to mauro1947, Rajan Nishchal & DeDaMrAz

    E pa zahvaljujem ja prvi na malome tutorialu najbržoj i najčiščoj metli na Balkanu-DidaMrazu

  38. #198
    GSM Guru wellerelc's Avatar
    Clan br.
    347
    Registrovan
    Nov 2005
    Lokacija
    ...wellerelc team...srebrenik
    Godina
    44
    Br. postova
    193
    Hvala
    7
    Pohvaljen 5 puta u 1 postu
    jedno pitanjce da ne otvaram novu temu

    dali driveri za tel. sa SE supporta mogu ili moraju biti sa cd-a koji dodje uz telefon i gdje ih treba postaviti da ih prepozna

    pitam ovo zato sto sam skinuo drv sa SE supp. i postavio ih u G/SE-tool/driver i nije ih prepoznao a odredio sam mu rucno odakle da ih uzme
    Izmenio wellerelc : 17-10-07 u 09:02

  39. #199
    GSM Expert Ekran's Avatar
    Clan br.
    757
    Registrovan
    Feb 2006
    Lokacija
    www.ekranservis.co.rs
    Godina
    35
    Br. postova
    1.706
    Hvala
    99
    Pohvaljen 196 puta u 140 postova
    [QUOTE=wellerelc]
    Citiram Original postovao MobileLand

    a na kojem supportu posto na ovome od SE je zadnja 096

    pozdrav
    ima i ova......
    Attached Images Attached Images

  40. #200
    GSM Master Luc+Luc's Avatar
    Clan br.
    1599
    Registrovan
    Jun 2006
    Lokacija
    B i H, Kiseljak - Wine
    Godina
    37
    Br. postova
    636
    Hvala
    5
    Pohvaljen 2 puta u 2 postova
    v0.91380096/UNI IS latest official version.
    all other not released (leaked beta) versions can crash your pc,
    forever damage your phone and drive you really mad
    you have been warned.

    (c) Laser

Strana 5 od 13 PrviPrvi 123456789 ... PoslednjiPoslednji

Slicne teme

  1. setool
    Postovao SharkMobil u forumu Prodaja starih i polovnih GSM elemenata
    Odgovori: 14
    Zadnji post: 27-05-10, 09:48
  2. setool
    Postovao masaarnold u forumu Potraznja
    Odgovori: 2
    Zadnji post: 27-11-09, 09:03
  3. SEtool
    Postovao rus u forumu SEtool support forum
    Odgovori: 1
    Zadnji post: 27-07-09, 09:54
  4. setool pin out
    Postovao Lipi u forumu SEtool support forum
    Odgovori: 4
    Zadnji post: 19-03-09, 23:18
  5. Polovni delovi & telefoni (RAZNO)
    Postovao Marco u forumu Prodaja starih i polovnih GSM elemenata
    Odgovori: 0
    Zadnji post: 22-10-08, 12:05

Pravila postovanja

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •