Strana 4 od 13 PrviPrvi 12345678 ... PoslednjiPoslednji
Prikazivanje rezultata 121 do 160 od 481

Tema: Setool razno

  1. #121
    GSM Senior vladar's Avatar
    Clan br.
    478
    Registrovan
    Dec 2005
    Lokacija
    Odzaci
    Godina
    45
    Br. postova
    95
    Hvala
    2
    Pohvaljen 3 puta u 1 postu
    Hvala puno.Nakon smestanja erom fajla u pravi prozor, odradjeno bez problema.

  2. #122
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova

    !!! Krediti za DEKODIRANJE/Flash DB2020 aparata !!!

    Krediti za DB2020 i PDA aparate (к800,v630,k610,z610,k320,k790,w710,w850,z710, m600 ,m608,w950,w958,p990) for SeTool users

    Cijene kredita su:


    Za kupovinu kredita kontaktirati GSM3G, GSM3G_NS, GSM_electronic, Garfild , Deki...
    Za kupce 1200 kredita i vise... mobileland@cg.yu , logs@setool.org , 067 33 44 88, 067 33 44 99, 067 547 152 (samo sms, please)....

    Potreban broj logova za operacije sa SETOOL softom:
    Za flash(finalizaciju aparata) je potreban samo 1 log.
    Za dekodiranje 'by patch' db2020 aparata 1 log.
    Za dekodiranje k320/W200 (K320/W200 otkljucavanje 'by patch' takodje kosta 1log) i PDA(new security m600 ,m608,w950,w958,p990) aparata 5 logova.

  3. #123
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova

    !!! Uputstvo za dekodiranje DB2020 aparata !!!

    Uputstvo Za Dekodiranje DB2020 sa novim SETOOL verzijama !!!
    Maybe stupid to make such 'manual' but some 'smart' guys will make many questions for sure.

    1) SIMPLE UNLOCK PROCEDURE !!! (cost 1 log=2-3usd, depends on the quantity of logs you'll buy)
    Go to settings tab:
    Check
    1) 'use server for csca unlock/flash'
    2) 'enable alternative security bypass'

    Go to Sony-Ericsson Tab:
    Press UNLOCK/Repair

    More simple hardly can be.

    2) DECUSTOMISE + UNLOCK PROCEDURE !!! (cost 1 log=2-3usd, depends on the quantity of logs you'll buy)
    1) chose files you want from support and add files (Sony-Ericsson tab)
    2) check 'use server for csca unlock/flash' (settings tab)
    3) check 'enable alternative security bypass' (settings tab)
    4) check 'complete phone' (settings tab)
    5) check 'unlock after flash' (settings tab)

    !!! WARNING !!!
    If anyhow, rest file for your phone firmware is not available please just flash your phone and all will be fine.

    BR

    p.s Dont forget to put rest files in the setool_card dir

    __________________________________________________ _______________________________

    Prevod !!!

    1) Obicno Dekodiranje !!! (kosta 1 log=2-3dolara, u zavisnosti od kolicine kupljenih logova)
    otici na 'settings tab':
    Oznaciti:
    1) 'use server for csca unlock/flash'
    2) 'enable alternative security bypass'

    Otici na 'Sony-Ericsson Tab':
    Kliknuti UNLOCK/Repair

    Jednostavnije tesko moze da bude.

    2) DECUSTOMISE + Dekodiranje !!! (kosta 1 log=2-3dolara, u zavisnosti od kolicine kupljenih logova)
    1) izabrati zeljene fajle u 'add files' (Sony-Ericsson tab)
    2) oznaciti 'use server for csca unlock/flash' (settings tab)
    3) oznaciti 'enable alternative security bypass' (settings tab)
    4) oznaciti 'complete phone' (settings tab)
    5) oznaciti 'unlock after flash' (settings tab)
    6) oznaciti 'do complete unlock...' (settings tab)

    P.S Nakon sto oznacite 'zeljene' opcije u SETIINGS Tab-u , i povratka na osnovni SE Tab, obavezno kliknuti 'Save' profile

  4. #124
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova

    Uputstvo za dekodiranje DB2020 !!!

    Ukratko, skinite sa support-a 'phones.rar' direktorijum i instalirajte drivere(upaljen aparat) .
    Kada zakacite aparat drzanjem 'c' dugmica trazice driver...A driver cete naci u setool_card direktorijumu, folder 'drivers' , 'usb flash drivers' .

    Posto kliknete unlock(ako ste ukucali user i pass, kao i ispravan server ip) soft ce uraditi prvi dio unlocka...nakon toga ga morate skinuti sa kabla upaliti i instalirati drivere(phones.rar direktorijum sa supporta) ako to vec niste uradili, iako je receno da je vise nego pozeljno.
    Kada setool pronadje telefon kliknuti "TESTPOINT OK" i kao sto samo dugme kaze, sve ce biti O.K .


    *OBAVEZNO PROCITATI KOMPLETNO UPUTSTVO IZNAD

  5. #125
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova

    !!! Uputstvo za dekodiranje PDA Sony-Ericsson aparata !!!

    instructions how to work with new semc smartphones.

    first, basics. there is two PDA security type - NEW and OLD. OLD security phones can be worked out without credits.
    NEW security phones requires credits to unlock (and to COMPLETELY flash phone).

    Identify button will show security type - it will write "NEW SECURITY detected" with NEW security phones.


    if you want to UNLOCK NEW SECURITY phone -

    if is better to install PDA phone drivers before operations.
    for that you need to download phones.rar from support.

    turn on phone. in "connections manager->usb" select "normal mode".
    now, attach cable. windows will ask you for drivers. point it to corresponding folder of extracted phones.rar.
    you must have "semc xxx usb modem" and "semc xxx application port" if drivers correctly installed.
    now, turn phone off and detach it. phone mode drivers installation completed.

    check "use server" and enter your login/password. PDA unlock requires 5 credits.

    now, you need install drivers for flashing.
    for that, poweron smartphone in fw update mode.

    - for p990/m600 press and hold "@" on TURNED OFF phone, then attach dcu60.
    - for w950 press and hold "C" on TURNED OFF phone, then attach dcu60.

    windows will ask you for a drivers. drivers in %setool2 dist%\drivers\HermioneDrivers. i attached a picture how correctly installed drivers must look in device manager.

    now, when all preparations finished - press unlock button and insert cable to phone,while holding appropriate key on phone.

    if you want to UNLOCK OLD SECURITY phone -


    UNCHECK "use server".
    BE SURE you have latest REST files.

    now, you need install drivers for flashing.
    for that, poweron smartphone in fw update mode.

    - for p990/m600 press and hold "@" on TURNED OFF phone, then attach dcu60.
    - for w950 press and hold "C" on TURNED OFF phone, then attach dcu60.

    windows will ask you for a drivers. drivers in %setool2 dist%\drivers\HermioneDrivers. i attached a picture how correctly installed drivers must look in device manager.

    now, when all preparations finished - press unlock button and insert cable to phone,while holding appropriate key on phone.


    if you want to FLASH phone -

    first, you need download needed firmware package.
    add it to firmware area on smartphone tab.

    if you have NEW SECURITY phone then
    check "use server" and enter your login/password, else UNCHECK "use server".

    now, you need install drivers for flashing.

    for that, poweron smartphone in fw update mode.

    - for p990/m600 press and hold "@" on TURNED OFF phone, then attach dcu60.
    - for w950 press and hold "C" on TURNED OFF phone, then attach dcu60.

    windows will ask you for a drivers. drivers in %setool2 dist%\drivers\HermioneDrivers. i attached a picture how correctly installed drivers must look in device manager.

    now, you can press desired operation.

    identify - to readout phone information (and userlock)
    flash - to flash package.

    !note. there is a checkbox named "process PDA update files" if you UNCHECK it - NO CREDIT WILL BE DEDUCTED from your account, but CDA will be UNCHANGED in phone. you got me ? ( got, lol ) yes, that is FREE FLASHING.

    !note. if you flashing multiple smartphones, BE SURE THAT DRIVERS ARE INSTALLED BEFORE starting desired operation.

    read gdfs - read gdfs for different things.
    write gdfs - write gdfs back.

    !note. if you write gdfs from other phone, say bye-bye to yours expensive pda. (that is only correct for NEW security)

  6. #126
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova

    !!! Uputstvo za dekodiranje PDA Sony-Ericsson aparata !!!

    Znaci, skinuti folder 'phones.rar' sa supporta i instalirati drivere.
    Drzati dugme "@" i ukopcati aparat na DCU60 kabal.Windows ce traziti driver...Koji cete naci u setool_card direktorijumu, folder 'drivers' , 'HermioneDrivers' ...
    Poslije klikanja 'Unlock' setool ce uraditi prvi dio posla i nakon toga zatraziti da upalite aparat(windows ce traziti drivere, ako vec niste unaprijed instalirali iste) ...nakon sto comp nadje aparat pritisnite 'TestPoint O.K' i to je to.

    p.s Svi aparati sa 067 mreze su new security type, tako da cim vidite musteriju recite 30-40e.

    *OBAVEZNO PROCITATI KOMPLETNO UPUTSTVO IZNAD

  7. #127
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova

    Uputstvo i moguce greske pri otljucavanju DB2020 (cid49&cid51) sa SETOOL-om !!!

    http://www.setool.org/manual.php

    Sve sto ne mozete naci na ovome linku ili vam nije jasno , molio bih da pitate...

    Pozdrav!

  8. #128
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    Prevod uputstva:

    Pitanje:
    Koja je odgovarajuca prodedura za otkljucavanje db2020/db2012 'by flash patch' ? Koje probleme mozemo susresti i kako ih rijesiti ?

    Odgovor:

    Klauzula:

    - Otkljucavanje 'by flash patch' radi samo na aparatima db2012 (k320,w200) i na db2020 aparatima sa FLASH CID 49,50,51
    - Flash CID se moze istitati sa aparata koriscenjem 'IDENTIFY' tipke na SETOOL Software-u
    - Ne mozete popraviti aparate sa ostecenim/neoriginalnim GDFS-om (pri pokusaju paljenja aparata samo vidimo blinkanje crvene lampice)
    - ' use altbypass' opcija se ne moze koristiti na PNX5230 phones (z310 trenutno) kao i na 'NEW SECURITY' PDA aparatima (mozda ce ova opcija biti dodata a mozda i ne)
    - za bilo koju odradu(Unlock/Flash) je potreban samo 1 KREDIT

    Kratko uputstvo:

    1. Upalite SETOOL soft i odabrati zeljeni model.
    2. Idite na 'settings tab' .
    3. Ukucajte zeljeni server (...197) , Login i password koji ste dobili pri kupovini kredita
    4. Oznacite "use server for csca flash/unlock", "enable alternative security bypass", "unlock after flash"
    5. Vratite se nazad na 'semc tab'. Pritisnite 'SAVE' u donjem desnom uglu.
    6. Preporucuje se upotreba dcu60 cable za odradu bilo kojeg db2020 modela - Najbrzi i najstabilniji interface
    7. E sada, jeste li download-ovali najnovije REST fajle ? Niste? Odmah to uradite.
    8. Kliknite na 'identify', SETOOL soft ce isticatati verziju software-a sa vaseg aparata, probajte da je nadjete u vasem REST direktorijumu
    9. Ukoliko REST fajl postoji samo pritisnite 'Unlock/Repair' - na ekranu ce vam se pojaviti nesto tipa ovoga


    SERVER SUPPORT ENABLED.
    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:51
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:30000000000000 CERT:RED
    FLASH CID:51 COLOR:RED
    PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
    Flash ID check:897E
    Flash props sent ok
    bypassing DB2020 security...
    done,restarting...
    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:51
    Speed:921600
    Trying to launch embedded bootloader...
    Embedded flashloader:
    DB2020_PRELOADER_FOR_SETOOL2
    Flash ID check:897E
    Flash props sent ok
    Restore from:C:\2\setool2\newrest\tems_r1b_k800
    full sig complete.
    USERCODE reset to "0000"
    Searching...
    Firmware lock check determined.
    Unlock Done
    Elapsed:42 secs.


    i ovo znaci da ste uspjesno otkljucali vas DB2020 aparat.

    10. Ukoliko ne mozete naci REST fajl za 'vas' firmware, nemate se cega bojati !
    Izaberite main+fsimage+custpack i pritisnite 'Flash' dugmic

    Na SETOOL software-u cete vidjeti nesto tipa:

    FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

    CDA:CDA102568/8
    MODEL:HB1-06 Generic
    VARIANT:RUSSIA
    LANGUAGE: EN
    LANGUAGE: RU

    SERVER SUPPORT ENABLED.
    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:51
    Speed:921600
    OTP LOCKED:1 CID:49 PAF:1 IMEI:30000000000000 CERT:RED
    FLASH CID:51 COLOR:RED
    PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
    Flash ID check:897E
    Flash props sent ok
    bypassing DB2020 security...
    done,restarting...
    ChipID:9900,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:51
    Speed:921600
    Trying to launch embedded bootloader...
    Embedded flashloader:
    DB2020_PRELOADER_FOR_SETOOL2
    Flash ID check:897E
    Flash props sent ok
    Nothing found,use manual selection
    writing C:\2\k800\cid52\R1JG001_1250210_GENERIC_WI.ssw
    CURRENT FLASH FILE CID:52
    SSW uses complete hash, hash len is:9200
    Will flash 460 blocks...
    SSW loading returns:0
    writing C:\2\k800\cid52\R1JG001_FS_BALTIC_WI_RED_CID52.ssw
    CURRENT FLASH FILE CID:52
    SSW uses complete hash, hash len is:4420
    Will flash 221 blocks...
    SSW loading returns:0
    full sig complete.
    USERCODE reset to "0000"
    Searching...
    Firmware lock check determined.
    CSloader version:
    060426 1726 HANCXC1329133_DB2020_FILESYSTEMLOADER_P5G
    loader startup: executed
    loader filesystem startup: executed
    loader GDFS startup: executed
    loader unlock: executed
    Writing package...
    Directory: tpa/preset/custom/
    CONTENT_DOWNLOAD_HOOK.itm (10240)
    Customize.xml (962)
    FM_PICTURES_HOOK_3.itm (10240)
    FM_SOUNDS_HOOK_3.itm (10240)
    FM_THEMES_HOOK_3.itm (10240)
    FM_VIDEOS_HOOK_3.itm (10240)
    GAMES_HOOK_3.itm (10240)
    MEDIA_PLAYER_HOOK_3.itm (10240)
    ORG_APPLICATIONS_HOOK_3.itm (10240)
    preloaded_config.xml (78607)
    SETT_RINGTONE_HOOK_1.itm (10240)
    SETT_SCREENSAVER_HOOK_1.itm (10240)
    SETT_STARTSHOW_HOOK_1.itm (10240)
    SETT_WALLPAPER_HOOK_1.itm (10240)
    VIDEO_PLAYER_HOOK_1.itm (10240)
    Phone detached
    Elapsed:415 secs.


    ...ovo znaci da ste uspjesno flash-ovali i dekodirali vas DB2020 aparat.


    Ukoliko nekim slucajem dobijete sledece podatke sa SETOOL soft-a

    Flash props sent ok
    bypassing DB2020 security...
    smth wrong with GDFS format,error is:30
    prepare failed


    znaci da niste selektovali obije i "USE SERVER" i "USE ALT BYPASS" opcije na 'setting's tab-u'.
    Provjerite podesavanja i ne zaboravite da uvijek snimite profil nakon mjenjanja podesavanja.

    Ukoliko nekim slucajem dobijete sledece podatke sa SETOOL soft-a

    Firmware lock check determined.
    llbug: can't get all data, got:0 expected:1926
    processing error when reading


    ukoliko koristite UFS ili USB-COM pretvarace znaci da je problem ili sa vasim kablovima ili sa driverima vasih kablova.
    Instalirajte najnovije DRIVERE, podesite 'latency' na com portu.
    Svakako, najbolje je da koristitie DCU60 kabal pri odradi svih db2020 aparata.

    Ukoliko dobijete sledece podatke sa SETOOL soft-a

    FOUND: R1ED001_CXC1250556_VODAFONE_MW
    Restore from:R1ED001_CXC1250556_VODAFONE_MW
    can't open file "C:\setool\rest\R1ED001_CXC1250556_VODAFONE_MW "
    full sig complete.


    to znaci da ili niste skinuli REST direktorijum sa SUPPORT stranice ili morate flash-ovati taj aparat usled ne postojanja odgovarajuceg REST fajla.


    Veoma rijetko se desava, iskljucivo na kablovima 'low cost' ili rucno(lose pravljenim) uradjenim kablovima,
    da SETOOL soft jednostavno ne moze da detektuje aparat:


    ........
    bypassing DB2020 security...
    done,restarting...
    ChipID:9900,EMP protocol:0301
    Speed:921600
    Trying to launch embedded bootloader...
    Abort all operations.
    embedded flashloader not responds !


    u nekim rijetkim slucajevima pokusaja FLASH-a preko usb moze da se desi i sledece


    ChipID:9900,EMP protocol:0301
    OLD EROM, OVERRIDING CID
    error while reading security units
    SECURITY UNITS CAN'T BE READ !
    PHONE IS EMPTY OR GDFS IS DAMAGED.


    i na "identify" SETOOL soft prikaze:


    ChipID:9900,EMP protocol:0301
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:49 PAF:1 IMEI:00000000000000 CERT:RED
    FLASH CID:49 COLOR:RED
    set_gdfs_props failed, exiting
    Elapsed:8 secs.


    Rjesenje:

    Uzimite 'ispravan' kulturno odradjen 4in1 kabal/ili koristite UFS
    next,
    Izaberite ili odgovarajuci com port/ili ufs
    Na 'semc tab-u', izaberite odgovarajuci model.
    Na 'settings tab-u' , oznacite samo "use server",
    Izabrati na 'semc tab-u' samo main firmware fajl, naravno odgovarajuci za dati model model
    i pritisnite FLASH .
    Provjerite nakon flash-a da li aparat pali. Trebao bi.

    Ukoliko nakon ovoga aparat treba i otkljucati, samo procitajte ovo uputstvo ispocetka.
    (Zapamtite - DCU60 ije najbrzi i najsigurniji nacin za odradu bilo kojeg db2020 aparata)

  9. #129
    Balkan GSM Team sebagsm's Avatar
    Clan br.
    8
    Registrovan
    Aug 2005
    Lokacija
    Teufel Stadt
    Godina
    38
    Br. postova
    306
    Hvala
    9
    Pohvaljen 14 puta u 11 postova
    aaaaaa znaci ipak ima resenje za cid52:


    writing C:\2\k800\cid52\R1JG001_FS_BALTIC_WI_RED_CID52.ssw
    CURRENT FLASH FILE CID:52
    SSW uses complete hash, hash len is:4420
    Will flash 221 blocks...
    SSW loading returns:0
    full sig complete.
    USERCODE reset to "0000"
    Searching...
    Firmware lock check determined.

  10. #130
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    Citiram Original postovao sebagsm
    aaaaaa znaci ipak ima resenje za cid52:


    writing C:\2\k800\cid52\R1JG001_FS_BALTIC_WI_RED_CID52.ssw
    CURRENT FLASH FILE CID:52
    SSW uses complete hash, hash len is:4420
    Will flash 221 blocks...
    SSW loading returns:0
    full sig complete.
    USERCODE reset to "0000"
    Searching...
    Firmware lock check determined.
    Mora od neceg i 'sjutra' da se zivi ...

  11. #131
    GSM Junior
    Clan br.
    4446
    Registrovan
    Mar 2007
    Lokacija
    bijeljina
    Godina
    36
    Br. postova
    3
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    ima li ko rest fajl za z310 r1jcoo2? ili gdje da skinem cust pack za ovu verziju? na setool supportu ga nema. cid51 je u pitanju. hvala unaprijed

  12. #132
    Balkan GSM Team sebagsm's Avatar
    Clan br.
    8
    Registrovan
    Aug 2005
    Lokacija
    Teufel Stadt
    Godina
    38
    Br. postova
    306
    Hvala
    9
    Pohvaljen 14 puta u 11 postova
    z310 ima pnx5230 cpu ... tako da patch unlock method nemoze ((((

  13. #133
    Balkan GSM Team Code Electronic's Avatar
    Clan br.
    295
    Registrovan
    Nov 2005
    Lokacija
    Code Support
    Br. postova
    583
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    Citiram Original postovao ViperGSM
    Ukoliko upgrade-ujete svoj telefon,jednostavno iscitajte gdfs,u njemu se nalaze svi bitni podaci(imenik,kalendar,notes,itd...) i upisite ga nakon full flesa

    - da tako je , samo sto je potrebno da se telefon prvo upali u normalu da prodje - please wait - i onda telefon ugasiti -> upisati gdfs (bekapovan od prije) i onda je sve tu (imenik i ostalo) ako to uradimo prije formata,tj odmah posle flesovanja telefona nista nije uradjeno -> znaci na kraju gdfs upisati kad telefon bude u normali <- . to sam radio i na telefonima koji ne pale a bitan imenik ( a dobro se naplati ), iscitam GDFS ako ima komunikaciju,ubacim posle softwera , ako nepali telefon a iscitan GDFS ubacim u drugi koji je ispravan i opet dobijem podatke . korisno ali to primjenjujem odavno ,moze sa bilo kojim od tool-ova da se odradi ova metoda.

  14. #134
    GSM Potencijal -Ex-'s Avatar
    Clan br.
    6671
    Registrovan
    Jun 2007
    Lokacija
    Federacija
    Godina
    37
    Br. postova
    51
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    ChipID: D000,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:51
    Speed:921600
    phone pre-boot failed,possible RECOVERY needed.
    Elapsed:14 secs.
    Z310...nije valjda da ne moze...

  15. #135
    GSM Master Luc+Luc's Avatar
    Clan br.
    1599
    Registrovan
    Jun 2006
    Lokacija
    B i H, Kiseljak - Wine
    Godina
    37
    Br. postova
    636
    Hvala
    5
    Pohvaljen 2 puta u 2 postova
    Ne moze z310...

  16. #136
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova

    Video manuali !!!


  17. #137
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    Dodat 'empty board filling' video manual !!!

  18. #138
    GSM Master ferati's Avatar
    Clan br.
    1034
    Registrovan
    Mar 2006
    Lokacija
    Tetovo macedonia
    Godina
    42
    Br. postova
    697
    Hvala
    237
    Pohvaljen 74 puta u 45 postova
    hiotno treba mi za k618 rest
    MAPP CXC article: R1JE001 prgCXC1250787_HUTCHISON_MW
    MAPP CXC version: R1JE001
    Language Package:HUTCH_1
    CDA article: CDA102723/4
    CDA version: R12A
    Default article: cxc1250557
    Default version: R1JE001

  19. #139
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    @Mobilland Nikola
    @ferati

    Do daljnjeg main+fs+unlock.Ferati k618 flashuj sa K610 flashevima.

    Pozdrav!

  20. #140
    GSM Guru Serviser's Avatar
    Clan br.
    237
    Registrovan
    Oct 2005
    Lokacija
    Kragujevac
    Godina
    46
    Br. postova
    179
    Hvala
    13
    Pohvaljen 4 puta u 4 postova

    Zakljucao mi se na 5 kljuceva, posle flesanja i unlocka. Da li mu ima pomoci?

    Zakljucao mi se na 5 kljuceva, posle flesanja i unlocka. Da li mu ima pomoci?

  21. #141
    GSM Guru Serviser's Avatar
    Clan br.
    237
    Registrovan
    Oct 2005
    Lokacija
    Kragujevac
    Godina
    46
    Br. postova
    179
    Hvala
    13
    Pohvaljen 4 puta u 4 postova
    Evo i resenja: upisati kao skriptu iz backup-a fajl sa ekstenzijom seczone, pa preflesati sa obelezenim 1.complet phone, 2. unlock after flash, 3. use server, 4. enable alternative security bypass.

    mene je kostalo 6 logova dok nisam provalio dobitnu kombinaciju.
    Nadam se da ce nekome ovo biti od koristi.
    pozz

  22. #142
    GSM Senior drbabic's Avatar
    Clan br.
    580
    Registrovan
    Dec 2005
    Lokacija
    Mladenovac, Srbija
    Godina
    52
    Br. postova
    69
    Hvala
    1
    Pohvaljen 1 put u 1 postu

    k320 cid50 otkljucavanje

    Moze li se ovaj TF otkljucati na patch i koliko kredita skida
    (ver. R4GC012 prgCXC1250682_GENERIC_MA),
    ili mora pun unlock?

  23. #143
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    Moze patch...ako nemas rest samo preflashuj sa cekiranim znas vec sto...

  24. #144
    GSM Senior drbabic's Avatar
    Clan br.
    580
    Registrovan
    Dec 2005
    Lokacija
    Mladenovac, Srbija
    Godina
    52
    Br. postova
    69
    Hvala
    1
    Pohvaljen 1 put u 1 postu
    Citiram Original postovao MobileLand
    Moze patch...ako nemas rest samo preflashuj sa cekiranim znas vec sto...
    Uradih tako, on skide 1 kredit napisa da je sve OK ali TF neupali.

  25. #145
    GSM Master sb323ar's Avatar
    Clan br.
    1279
    Registrovan
    Apr 2006
    Lokacija
    Croatia, Slavonski Brod
    Godina
    54
    Br. postova
    424
    Hvala
    0
    Pohvaljen 1 put u 1 postu
    Citiram Original postovao drbabic
    Uradih tako, on skide 1 kredit napisa da je sve OK ali TF neupali.
    Jesi li cekirao revert to red?

  26. #146
    GSM Senior drbabic's Avatar
    Clan br.
    580
    Registrovan
    Dec 2005
    Lokacija
    Mladenovac, Srbija
    Godina
    52
    Br. postova
    69
    Hvala
    1
    Pohvaljen 1 put u 1 postu
    Citiram Original postovao sb323ar
    Jesi li cekirao revert to red?
    Ne, cekirao sam:
    "use server for csca flash/unlock" i
    "enable alternative security bypass"

  27. #147
    GSM Expert Dr SEMA's Avatar
    Clan br.
    66
    Registrovan
    Sep 2005
    Lokacija
    KANDAHAR
    Br. postova
    2.528
    Hvala
    197
    Pohvaljen 659 puta u 314 postova
    @drbabic
    i dobiješ mrtav aparat posle toga + potrošiš kredit ???
    jel tako tako?? tako je. i meni se desilo 3-4 puta i vidim ja nevodi to nigdje,i ja nađem drugi način ,naravno sa setoolom,ali i MT je neprikosnoven,tako da obadva toola provjereno rade,pa koji mi bude slobodan ili pri ruci.
    BR

  28. #148
    GSM Senior drbabic's Avatar
    Clan br.
    580
    Registrovan
    Dec 2005
    Lokacija
    Mladenovac, Srbija
    Godina
    52
    Br. postova
    69
    Hvala
    1
    Pohvaljen 1 put u 1 postu
    Citiram Original postovao Dr SEMA
    @drbabic
    i dobiješ mrtav aparat posle toga + potrošiš kredit ???
    jel tako tako?? tako je. i meni se desilo 3-4 puta i vidim ja nevodi to nigdje,i ja nađem drugi način ,naravno sa setoolom,ali i MT je neprikosnoven,tako da obadva toola provjereno rade,pa koji mi bude slobodan ili pri ruci.
    BR
    Probao sam ga i na Univerzalu, prvo preko patch-a i izgubim 20 kredita a dobijem mrtav tf. Zatim probam opet na Univerzalu ali full i skine mi 50 kredita napise sve OK a telefon i dalje zakljucan.
    Ljudi moze li se ovo otkljucati i kako jer potrosih vise kredita nego sto vredi ovaj krs???

  29. #149
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    O.K

    Za start daj screenshoot sa SETOOL ekrana (desni click na misu 'copy to clipboard' ).

  30. #150
    GSM Senior drbabic's Avatar
    Clan br.
    580
    Registrovan
    Dec 2005
    Lokacija
    Mladenovac, Srbija
    Godina
    52
    Br. postova
    69
    Hvala
    1
    Pohvaljen 1 put u 1 postu
    Closing UFS at your request.
    SERVER SUPPORT ENABLED.
    ChipID:8040,EMP protocol:0301
    NEW SECURITY MODEL DETECTED
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:50
    Speed:921600
    Flash ID check:2019
    Flash props sent ok
    OTP LOCKED:1 CID:50 PAF:1 IMEI:35670601131500 CERT:RED
    FLASH CID:50 COLOR:RED

    MAPP CXC article: R4GC012 prgCXC1250682_GENERIC_MA
    MAPP CXC version: R4GC012
    Language Package:S_E_EUROPE
    CDA article: CDA102295/7
    CDA version: R2A
    Default article: cxc1250690
    Default version: R4EA031

    Network LOCKED
    Operator: 216-01

    USERCODE:0000

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    Elapsed:10 secs.

  31. #151
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    Takodje, jos jednom da ponovim...Prica tipa ubio sam telefon a 'sve' sam odradio ne pije vodu...
    Bez screenshoot-a , t.j bez desni klick misem na setool scren, pa copy to clipboard pa paste ovdje mogu jedino da kazem da mi je zao sto ste 'sve' odradili a setool vam je ipak 'ubio' telefon.

    Znaci, bez ikakve zle zelje/volje ja bez screenshot-a jednostavno ne znam nista...Telepatske moci su mi u zacecu...

  32. #152
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    No server found.
    unlock failed, that is fatal
    Elapsed:18 secs.


    Ovo mi ono normalno zvuci...
    malo vise info-a...

  33. #153
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    nakon igre preko univerzala jedino ti moze pomoci:
    Situacija2(za garfilda - ipak postoji rijesenje...izvini ti ...): nakon sto je neko vec 'zakucao' 'pametnim rukovanjem' k320 sa setool-om na 5 lockova ili sa univerzalom i samim time nemate 'backup' file sve sto trebate da uradite je da ga flashujete na R4GC012 firmware sa SETOOL-om i uradite 'unlock by expencive metoda' ...Znaci u settings samo cekirate 'use server' .

  34. #154
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    ovo je copy-paste mog objasnjenja slicne situacije sa gsmreverse foruma...

  35. #155
    GSM Expert Dr SEMA's Avatar
    Clan br.
    66
    Registrovan
    Sep 2005
    Lokacija
    KANDAHAR
    Br. postova
    2.528
    Hvala
    197
    Pohvaljen 659 puta u 314 postova
    Ivane druže stvarno nešto ne štima,
    evo situacija kod mene,telefon nov 100%

    -use server for csca flash/unlock
    -enable alternative security bypass

    i to bi po propisu trebalo biti to,sve završi,ali aparat ne pali,posle toga selektujem fajlove za fleš (R4GC012 firmware)
    i selektujem:
    -complete phone
    -unlock after flash
    -use server for csca flash/unlock
    -enable alternative security bypass

    i telefon radi ko sat.

  36. #156
    GSM Senior drbabic's Avatar
    Clan br.
    580
    Registrovan
    Dec 2005
    Lokacija
    Mladenovac, Srbija
    Godina
    52
    Br. postova
    69
    Hvala
    1
    Pohvaljen 1 put u 1 postu
    Citiram Original postovao MobileLand
    nakon igre preko univerzala jedino ti moze pomoci:
    Situacija2(za garfilda - ipak postoji rijesenje...izvini ti ...): nakon sto je neko vec 'zakucao' 'pametnim rukovanjem' k320 sa setool-om na 5 lockova ili sa univerzalom i samim time nemate 'backup' file sve sto trebate da uradite je da ga flashujete na R4GC012 firmware sa SETOOL-om i uradite 'unlock by expencive metoda' ...Znaci u settings samo cekirate 'use server' .

    Napravio sam ja backup i vratio ga u zivot, odnosno samo prvi kljuc je zakljucan ali kako i njega skinuti a da ne derete po usima?

  37. #157
    GSM Expert Dr SEMA's Avatar
    Clan br.
    66
    Registrovan
    Sep 2005
    Lokacija
    KANDAHAR
    Br. postova
    2.528
    Hvala
    197
    Pohvaljen 659 puta u 314 postova
    @drbabic
    ajde uradi ovu gore navedenu proceduru.pa javi rezultat

  38. #158
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    O.K

    Do daljnjeg drzite se Semirovog manuala.
    Ja krecem sa inspekcijom da vidim koji to djavo ne stima direkt (vjerovatno rest file problem).

    Pozdrav!

    TEMA STICKY

  39. #159
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    I eto da sumiramo sve najzad:
    1)Skinuti R4GC012 firmware i flashovati FREE aparat na tu verziju
    2)Sad vise nema nikakve frke da vam se desi...

  40. #160
    ---Management--- MobileLand's Avatar
    Clan br.
    1
    Registrovan
    Aug 2005
    Lokacija
    Bar
    Godina
    41
    Br. postova
    1.683
    Hvala
    127
    Pohvaljen 94 puta u 45 postova
    Citiram Original postovao drbabic
    Napravio sam ja backup i vratio ga u zivot, odnosno samo prvi kljuc je zakljucan ali kako i njega skinuti a da ne derete po usima?
    selektuj fajlove za fleš (R4GC012 firmware)
    u settings:
    -complete phone
    -unlock after flash
    -use server for csca flash/unlock
    -enable alternative security bypass

Strana 4 od 13 PrviPrvi 12345678 ... PoslednjiPoslednji

Slicne teme

  1. setool
    Postovao SharkMobil u forumu Prodaja starih i polovnih GSM elemenata
    Odgovori: 14
    Zadnji post: 27-05-10, 09:48
  2. setool
    Postovao masaarnold u forumu Potraznja
    Odgovori: 2
    Zadnji post: 27-11-09, 09:03
  3. SEtool
    Postovao rus u forumu SEtool support forum
    Odgovori: 1
    Zadnji post: 27-07-09, 09:54
  4. setool pin out
    Postovao Lipi u forumu SEtool support forum
    Odgovori: 4
    Zadnji post: 19-03-09, 23:18
  5. Polovni delovi & telefoni (RAZNO)
    Postovao Marco u forumu Prodaja starih i polovnih GSM elemenata
    Odgovori: 0
    Zadnji post: 22-10-08, 12:05

Pravila postovanja

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •