Strana 2 od 3 PrviPrvi 123 PoslednjiPoslednji
Prikazivanje rezultata 41 do 80 od 91

Tema: CycloneBox Update!!!

  1. #41
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box Installer v1.12 Released

    --------------------------------------------------------------------------------

    Hi, new installer is ready.

    =====================
    Installer v1.12
    09.03.2011
    =====================
    - Firmware v1.55 introduced - RAP4 CMT Booting (Wrong first char) fixed
    - Added SP unlock via server / log2cod reading
    - Added standalone SX4 auth
    - Added standalone Superdongle Keys Repair
    - Supported phones:
    - RAPU Based: 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72
    - RAP4 Based: 3710, 5330, 7230, 6303i, X3
    - Minor changes and bugfixes

    Download Link: http://www.karwos.hk/CycloneBoxInstaller.exe

    In case of RAP4 mobiles make sure you are using cables with:
    1) *******ted MBUS line 2) Digital ground connectet to analog 3) most possible short, without adapter

    Else - you will get booting problems.

    Best Regards,
    Cyclone Team

  2. #42
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box v1.57 1st in world ORIGINAL RPL BACKUP and SD BACKUP for RAPU/RAP4/RAPID

    --------------------------------------------------------------------------------

    Hi, new firmware for Cyclonebox is Avaiable.

    - Added PM308 decryption for NEW phones (RAPU , RAP3Gv4, RAPIDO New ), that means you can:
    - Superdongle Key backup
    - CMLA Key backup
    - Correct Phone Security Analysis for this phones
    - Correct MCU/DSP timestamps analysis
    - Phone auhtorization without corrupting SD key, when SD key is correct
    - After local SX4 auth , phone STILL MIGHT BE authorized with ORIGINAL NOKIA SX4 CARD
    - Created RPL from RAPU/RAP4 phones are now 100% like delivered from Nokia! That means after full erase and writing back backed-up RPL, your phone STILL MIGHT BE AUTHORIZED WITH ORIGINAL SX4 CARD - no security issues !
    - Created RPL from RAPU phones might also SAVE PHONE from DESTROYING by some other tools (Contact Service after upgrade to latest versions...)
    - Minor changes and bugfixes

    This is firmware-side update only, upgrade your box firmware to v1.57 and use latest installer v1.12


    Created RPL with FULL NOKIA CONTENT (SD, CMLA, ...)


    Quote:
    RPL Creation started...
    Processing CMT Part...
    Storing Product Code...
    Storing PSN...
    Storing HWID...
    Trying to store Simlock...
    Reading Configuration Key...
    Hashing...
    Reading SHA1-RSA Signature...
    Reading SHA1-HMAC Signature...
    Storing Simlock...
    Trying to store WMDRM RPL...
    Reading Keys...
    Storing WMDRM PD...
    Reading Security Block...
    Security block OK and saved to "RM-469_355216039314532_2011-03-10_130535.SecurityBlock.PM"
    "1BB0020A296303443292389F545846C201100A5C.C000 3160 " Exists, That is good...
    Storing Additional Data...
    Checking Superdongle Key...
    Encrypting Superdongle Key...
    Storing Superdongle Key...
    Checking CMLA Key...
    Storing CMLA Key...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
    CMT_EM_ASIC_ID: 00001040
    CMT_EM_ASIC_ID: 00001030
    CMT_PUBLIC_ID: 1BB0020A296303443292389F545846C201100A5C
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
    CMT_BOOT_ROM_CRC: 3E273BF6
    CMT_SECURE_ROM_CRC: 37BE26FA
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.48.1, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 85F252E351E225CAFC4DFBC8041EABD2823E3500
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    Storing NPC...
    Storing CCC...
    Storing HWC...
    CMT VARIANT Not Found
    Restarting MCU...
    RPL Saved OK

    Example seccurity analysis, timestamp analysis, etc for RAPU


    Quote:
    Started Reading MCU & DSP Timestamps...
    MCU Version V ICPR82_09w46.8
    MCU Date 30-03-10
    Product RM-469 (Nokia E52)
    Manufacturer (c) Nokia
    IMEI 355216039314532
    Mastercode 2637612627
    Reading Security Block...
    Security block OK and saved to "RM-469_355216039314532_2011-03-10_130314.SecurityBlock.PM"
    "1BB0020A296303443292389F545846C201100A5C.C000 3160 " Exists, That is good...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
    CMT_EM_ASIC_ID: 00001040
    CMT_EM_ASIC_ID: 00001030
    CMT_PUBLIC_ID: 1BB0020A296303443292389F545846C201100A5C
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
    CMT_BOOT_ROM_CRC: 3E273BF6
    CMT_SECURE_ROM_CRC: 37BE26FA
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.48.1, Algo: XSR 1.6
    Initializing TurboCache...
    TurboCache Loaded!
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: 85F252E351E225CAFC4DFBC8041EABD2823E3500
    APE Boot skipped on user request
    Flashbus Write baud set to 5.0Mbits
    Reading MCUSW...
    Reading DSP0...
    Restarting MCU...
    ------ SECURITY BLOCK TIMESTAMPS ------
    Timestamp Slots Detected: 4
    Timestamp[1] "AENO", 2010-02-19 11:11:38
    Timestamp[1] Hash "0BCD489612D4A4968B4D42A5631FC85C5D7E0E81"
    Timestamp[1] Factory MCUSW Timestamp 1970-01-01 02:00:00
    Timestamp[1] Dejan Hack Detected
    Timestamp[1] ValidAfter Factory MCUSW Test Passed OK!
    Timestamp[2] "CMCU", 2010-04-02 11:57:08
    Timestamp[2] Hash "4CC50641D7C45E9DFE2967D4802C8710547BF54A"
    Timestamp[2] Factory MCUSW Timestamp 2009-09-02 15:18:02
    Timestamp[2] ValidAfter Factory MCUSW Test Passed OK!
    Timestamp[3] "CDSP", 2010-04-02 11:57:07
    Timestamp[3] Hash "D8C94BFA607710D856D8C78A9CE3EB411CD7AC4C"
    Timestamp[3] Factory MCUSW Timestamp 2009-09-02 15:18:02
    Timestamp[3] ValidAfter Factory MCUSW Test Passed OK!
    Timestamp[4] "AMCU", 2010-04-02 11:57:09
    Timestamp[4] Hash "BFC854388C2C26014F05B5084A8033CB30E472EB"
    Timestamp[4] Factory MCUSW Timestamp 2009-09-02 15:18:02
    Timestamp[4] ValidAfter Factory MCUSW Test Passed OK!
    -------------------------------------
    ------ ACTUAL FLASH TIMESTAMPS ------
    MCUSW Timestamp 2010-04-02 11:57:08
    Flash MCUSW Timestamp synchronized with Security Block MCUSW Timestamp OK!
    DSP Timestamp 2010-04-02 11:57:07
    Flash DSP Timestamp synchronized with Security Block DSP Timestamp OK!
    -------------------------------------
    Finished, MCU and DSP Timestamps looks good!
    Started Phone Security Analysis...
    MCU Version V ICPR82_09w46.8
    MCU Date 30-03-10
    Product RM-469 (Nokia E52)
    Manufacturer (c) Nokia
    IMEI 355216039314532
    Mastercode 2637612627
    Reading Security Block...
    Security block OK and saved to "RM-469_355216039314532_2011-03-10_130516.SecurityBlock.PM"
    Step 1 : Testing SIMLOCK
    SIMLOCK SEFLTEST PASSED OK!
    Step 2 : Testing SECURITY
    SECURITY SEFLTEST PASSED OK!
    Step 3 : Analyzing Security Block
    "1BB0020A296303443292389F545846C201100A5C.C000 3160 " Exists, That is good...
    Checking SUPERDONGLE...
    SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
    Checking SIMLOCK...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking MCU&DSP TIMESTAMPS...
    MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
    Checking CMLA KEYS...
    CMLA KEYS FOUND AND CHECKSUM OK! PASSED!
    Checking ECC KEYS...
    ECC KEYS FOUND AND CHECKSUM OK! PASSED!
    Checking DIV KEYS...
    DIV KEYS FOUND AND CHECKSUM OK! PASSED!
    Analyze finished!


    Best Regards,
    Cyclone Team

  3. #43
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone!! FREE, STANDALONE UNLOCK/SD REPAIR/SX4 AUTH/SD BACKUP/..FOR ALL NEW BB5 HASH

    --------------------------------------------------------------------------------

    Hi, new update for Cyclone Box is ready.

    Reading of LOG file added for all latest hashes and roms using new flashing protocol for RAPU CPU.

    This means you can now:
    - SP Unlock using LOG2COD
    - Repair supedongle keys
    - Backup superdongle key - FIRST AND ONLY IN THE WORLD (no other box support new encryption!)
    - Create RPL from phone - 100% Nokia LIke (with ALL security)
    - Standalone SX4 authorization without SX4 Card (only box)
    - Detailed security analysis
    - Read MCU&DSP Timestamps
    - Others (soon....)

    The new logreading method is simply not related to Rootkey hash.
    If loader is signed for given hash and runs ok - it will work.
    RAPU Loader is signed for following hashes (however most of them even not exists in production, or keys isn't use anymore, but as long as other teams provide this hashes, we will provide it too):

    68597B9162BAB81AF74C56E78EA2588F
    EA81B32860B86EF4231A11831045F3E6
    8E309B54DA1ADDE27C2A035D63AACACD
    916F75217F32081248B15C38DFC8E81B - Nokia X3-02, Nokia C5, Nokia E5, Nokia N8, Nokia C7, Nokia C3-01
    DA550B5BAAB517409088A3E4F3EB53AC
    46802B476C93A05CBAF76A64752086A9*
    25B977A055BE9B5DEC0C38A2A279C695 - 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72
    700370BCF8AFBAB25DD62DBD124FD9CE - Nokia 5630
    87FAC992288DA497A663E5DDC0410B11
    928E5FFB88D81E5F74729A212AB9D12E
    F2D76DFAFD66C7F195F278417DF05888
    F682624FFB08F6D955DBE7D9C0485084
    55DF9CBCC80B17225043DDA1CC783C97

    Of course update is free, we don't ask for any activations, we don't even require internet connection.

    For reading Log file you need valid TX2 enabled cable (otherwise software will hangup upon Getting Configuration!).

    Here is tested with Nokia C5 (thx Moulnisky!)


    Quote:
    Reading SL3 LOG File...
    MCU Version V ICPR82_10w08
    MCU Date 26-02-10
    Product RM-645 (Nokia C5)
    Manufacturer (c) Nokia
    IMEI 354847049967066
    Mastercode 5222614247
    WARNING: "0AC00114AD9C03443A69EAF6BE05ED1B1E10F214.C000 249F " Not Exists, Will read it...
    Reading CYC file from phone...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
    CMT_EM_ASIC_ID: 00000C35
    CMT_EM_ASIC_ID: 00000C30
    CMT_PUBLIC_ID: 0AC00114AD9C03443A69EAF6BE05ED1B1E10F214
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
    CMT_BOOT_ROM_CRC: E693EF0D
    CMT_SECURE_ROM_CRC: AC22615B
    CMT Ready!
    New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Loader: RAPxx CommonBoot v1.02 (C) 2011 Karwos Labs
    Custom loader running OK! Working...
    Readed OK, Saving to "0AC00114AD9C03443A69EAF6BE05ED1B1E10F214.C000 249F "
    Success!

    More will come next week probably together with new installer,bugfixes,and features....

    Where from download?

    http://www.karwos.hk/CycloneNewUnlock.exe

    Box Firmware v1.60 is ORDINARY for this update !

    Best Regards,
    Cyclone Team

  4. #44
    GSM Potencijal ivanx's Avatar
    Clan br.
    842
    Registrovan
    Feb 2006
    Lokacija
    YU
    Godina
    42
    Br. postova
    51
    Hvala
    3
    Pohvaljen 2 puta u 2 postova
    Hi, new update for Cyclone Box is ready.

    Reading of LOG file added for all latest hashes and roms using new flashing protocol for RAPIDO CPU.

    This means you can now:
    - SP Unlock using LOG2COD (SL3 phones)
    - Direct SP unlock of SL2 479cc.. based mobiles using NCK calculation
    - Direct SP unlock of SL2 479cc.. based mobiles using RPL calculation
    - Repair supedongle keys
    - Create RPL from phone - 100% Nokia LIke (with ALL security)
    - Standalone SX4 authorization without SX4 Card (only box)
    - Detailed security analysis
    - Read MCU&DSP Timestamps
    - Others (soon....)

    The new logreading method is simply not related to Rootkey hash.
    If loader is signed for given hash and runs ok - it will work.
    RAPIDO Loader is signed for following hashes (however most of them even not exists in production, or keys isn't use anymore, but as long as other teams provide this hashes, we will provide it too):

    68597B9162BAB81AF74C56E78EA2588F
    EA81B32860B86EF4231A11831045F3E6
    8E309B54DA1ADDE27C2A035D63AACACD
    916F75217F32081248B15C38DFC8E81B
    DA550B5BAAB517409088A3E4F3EB53AC
    B8C3ADECFC997FCD8081D3DEAF870B8C
    479C6DDE3942E12C429C1D6ADED80371
    C70CB07324056BC66A824347F40DB2D5
    B1A9CEADB5CE9CF9FB4F442150AA8E09
    46802B476C93A05CBAF76A64752086A9
    1B0D74C532CA1C6133940C740E8C786E
    25B977A055BE9B5DEC0C38A2A279C695
    700370BCF8AFBAB25DD62DBD124FD9CE
    9DDBFCFE6E73CED7D8C6268C8EB85723
    7B045400E1752022F9EB80B0DEA9C65D
    928E5FFB88D81E5F74729A212AB9D12E
    F2D76DFAFD66C7F195F278417DF05888
    CAEEBB65D3C48E6DC73B49DC5063A2EE
    FCB5C510AF7F09F313D9BDE85A707CC0
    9A28E119033B91D14D22838C86D0D53C
    F682624FFB08F6D955DBE7D9C0485084
    55DF9CBCC80B17225043DDA1CC783C97
    38F312750F686F9FC9B1B3778774A195
    BAF3A9C3DBFA8454937DB77F2B8852B1
    A5404AE83A594ECADEE532F0C236BFA6
    E9EFF4BFAA5393217CA6B17755FC3E14

    Of course update is free, we don't ask for any activations, we don't even require internet connection.
    For reading Log file you need valid TX2 enabled cable (otherwise software will hangup upon Getting Configuration!).

    Here is tested with Nokia 5800-SL3-479cc (thx Moulnisky!)

    Quote:
    Reading SL3 LOG File...
    MCU Version V ICPR72_09w20.15
    MCU Date 30-12-09
    Product RM-356 (Nokia 5800 XpressMusic)
    Manufacturer (c) Nokia
    IMEI 352012047692891
    Mastercode 413074336
    WARNING: "05C00008DF1F00527E9AEF53D8B8ACEC8C185116.C000 0607 " Not Exists, Will read it...
    Reading CYC file from phone...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 05C00008DF1F00527E9AEF53D8B8ACEC8C185116
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.48.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
    Requested Algorithm: XSR 1.5 (CMT)
    Sending Auxiliary Loader...
    Auxiliary Loader Sent!
    Loader: RAPxx CommonBoot v1.03 (C) 2011 Karwos Labs
    Custom loader running OK! Working...
    Readed OK, Saving to "05C00008DF1F00527E9AEF53D8B8ACEC8C185116.C000 0607 "
    Success!
    Where from download?

    http://www.karwos.hk/CycloneNewUnlockV2.exe

    Box Firmware v1.60 is ORDINARY for this update !

    Best Regards,
    Cyclone Team

  5. #45
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    78
    Pohvaljen 150 puta u 121 postova
    Cyclone STOP THE UNSTOPPABLE!! NEW RAPIDO ENCRYPTION, 1ST SD/CMLA/SX BACKUP, MORE!!!!
    Hi to all, new Update for Cyclone Box is Ready.
    We are sorry for problems caused by previous release.
    In this version we implemented new encryption routines for New MCU RAPIDO Phones. That means you can now:

    - Read correct LOG file for SL3 SP Unlock (sorry, discard previous ones!)
    - Direct SP Unlock of SL2 New hash (479cc based) phones (6760, 6120c) using NCK Calculation
    - Direct SP Unlock of SL2 New hash (479cc based) phones (6760, 6120c) using RPL Calculation
    - Absolutly FIRST IN THE WORLD - Superdongle Key Backup for new hash - no other tool support it
    - Absolutly FIRST IN THE WORLD - Standalone SX4 authorization without Superdongle key corruption
    - Absolutly FIRST IN THE WORLD - CMLA/WMDRM Key backup
    - Absolutly FIRST IN THE WORLD - 1:1 Original Nokia RPL Backup (w/o risk of DAMAGING phones!)
    - Security analysis
    - The new encryption works also for old rapido phones (CAEEBB based) which noone tool could properly decrypt Superdongle/etc data
    - More ..

    Supported hashes:

    68597B9162BAB81AF74C56E78EA2588F
    EA81B32860B86EF4231A11831045F3E6
    8E309B54DA1ADDE27C2A035D63AACACD
    916F75217F32081248B15C38DFC8E81B
    DA550B5BAAB517409088A3E4F3EB53AC
    B8C3ADECFC997FCD8081D3DEAF870B8C
    479C6DDE3942E12C429C1D6ADED80371
    C70CB07324056BC66A824347F40DB2D5
    B1A9CEADB5CE9CF9FB4F442150AA8E09
    46802B476C93A05CBAF76A64752086A9
    1B0D74C532CA1C6133940C740E8C786E
    25B977A055BE9B5DEC0C38A2A279C695
    700370BCF8AFBAB25DD62DBD124FD9CE
    9DDBFCFE6E73CED7D8C6268C8EB85723
    7B045400E1752022F9EB80B0DEA9C65D
    928E5FFB88D81E5F74729A212AB9D12E
    F2D76DFAFD66C7F195F278417DF05888
    CAEEBB65D3C48E6DC73B49DC5063A2EE
    FCB5C510AF7F09F313D9BDE85A707CC0
    9A28E119033B91D14D22838C86D0D53C
    F682624FFB08F6D955DBE7D9C0485084
    55DF9CBCC80B17225043DDA1CC783C97
    38F312750F686F9FC9B1B3778774A195
    BAF3A9C3DBFA8454937DB77F2B8852B1
    A5404AE83A594ECADEE532F0C236BFA6
    E9EFF4BFAA5393217CA6B17755FC3E14

    Where from download?
    http://www.karwos.hk/CycloneNewUnlockV3.exe

    (Firmware v1.61 required)

    Best Regards,
    Cyclone Team

  6. #46
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    CycloneBox BlackBerry Module Updated

    --------------------------------------------------------------------------------

    hello

    CYCLONE BOX ADDED ALL LATEST BLACKBERRY MEPS (including new sec 2011)


    (12 New Security Meps Added)
    MEP-06041-011
    MEP-09625-002
    MEP-40954-001
    MEP-24667-003
    MEP-08209-004
    MEP-40488-002
    MEP-09292-008
    MEP-39371-001
    MEP-09292-006
    MEP-34723-001
    MEP-34870-001
    MEP-24660-003

    NOTE :
    This is Server Side Update ,So you dont have to do anything just enjoy calculating new meps with CycloneBox




    for more info please click HERE
    http://forum.gsmhosting.com/vbb/f528...6/#post7352446

    br
    CycloneBox Team

    -Eprom-

  7. #47
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box Installer v1.13, HD69xx Support, 15% Faster BF, 20 digits NCK, MEP-4, ..

    --------------------------------------------------------------------------------

    Hi, New Installer for Cyclone Box is Ready.

    What's new ?

    =====================
    Installer v1.13
    24.05.2011
    =====================
    - New BB5 FBUS/USB Loaders v11.14.0 introduced
    - Added 20 digits NCK recognization. Software will now give alert upon reading LBF data, when 20 digits NCK data will be found. This saves server time!
    - The Profile Bits are also analyzed now during Reading LBF Data. If phone is i.e. from Telcel Mexico - LBF data will not be readen (because it will not accepted calculated NCK code). This saves server time!
    - BB5/XGold LBF is creating now additional "BCL" format file
    - BB5/XGold LBF is creating now additional "SHA" format file
    - BB5/XGold LBF is creating now additional oclHashCat ATI based 64-bit BAT File
    - BB5/XGold LBF is creating now additional oclHashCat ATI based 32-bit BAT File
    - BB5/XGold LBF is creating now additional oclHashCat NVIDIA based 64-bit BAT File
    - BB5/XGold LBF is creating now additional oclHashCat NVIDIA based 32-bit BAT File
    - SIMLOC30 RPL Write Fixed (C7-00,C2-01,...)
    - The generated "BAT" file could be used by oclHashCat-lite. It's 3rd party software, avaiable here: Download oclHashcat-lite-0.05.7z - hashcat, advanced password recovery . Unpack it somewhere, and place in same dir readen "BAT" files. oclHashCat is 15% faster (can reach 6Billions hashes/sec on 2xhd5970) than log2cod, plus it supports latest ATI GPUS (HD6970,HD6990,HD6xxx). It supports calculation resume, etc.
    - You don't need now log2cod to generate LBF Data. Just use generated BAT file for fast oclHashCat calculation. Generated COD file you can send directly to our server via "Send COD File to server" button to receive valid Level 7 code.
    - Added oclHashCat COD file format support (now you can use oclHashCat generated COD/TXT files to submit to server and calculate Level 7 code)
    - Added MxCrap COD file format support (now you can use oclHashCat generated COD/TXT files to submit to server and calculate Level 7 code)
    - Added warning message when TX2 transmission error occurs during 2ND Loader Initialization
    - Upgraded RAPIDO Custom loader to v1.05. Fixed Reading Unique Data issues on old Public Rom (A8C1D671) based phones (N95,N78,...).
    - BlackBerry MEP-4 calculation added
    - Merged previous updates (RAPIDO/RAPU/RAP4 all latest hashes support for reading LBF data, etc...)
    - Fixed Security Code Reset Issues on DCT4/BB5 Platform
    - Firmware v1.61 Released
    - Minor changes and bugfixes

    Where from download?
    http://www.karwos.hk/CycloneBoxInstaller.exe

    The installer already contains all latest updates, you don't need to download nothing more!

    Best Regards,
    Cyclone Team

  8. #48
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    CycloneBox BlackBerry New Mep Added

    --------------------------------------------------------------------------------

    We are happy to announce that we have added new 2011 security mep
    MEP-41468-001


    Discussion thread
    CycloneBox BlackBerry New Secuirty Mep Added


    br
    CycloneBox Team

  9. #49
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    CycloneBox Installer v1.14 Released - BB5 SL2/SL3 USB Unlock/SX4Auth/SDRepair Added

    --------------------------------------------------------------------------------

    Hi to all!

    New Cyclone Box Installer v1.14 is Ready.

    What's new?


    Quote:
    =====================
    Installer v1.14
    07.06.2011
    =====================
    - New BB5 FBUS/USB Loaders v11.16.0 Introduced
    - Unique Data Reading for RAPIDO based phones by USB added
    - Unique Data Reading for RAPU based phones by USB added
    - SL2 Unlock for Old Hash (E51..,..) and New Hash (6120c,6760) just by USB cable
    - SL3 Unlock by reading LBF data for all SL3 RAPIDO/RAPU Phones
    - Standalone Superdongle Auth - without SD key corruption
    - SD Keys Repair
    - Security Analyze
    - RPL Backup
    - All this using just usb cable...
    - Our loaders automatically set phone to LocalMode after reading LogData - tested with N97, seems 1st in world
    - RAPIDO phones before reading USB LogFile, needs to be manually set into FlashMode. Apporiate messagebox will be displayed with instructions (replug battery, cable, etc..). If your phone is RAPU or RAP4 based, you don't need to reject battery or do nothing - just click OK and it will switch to RAW mode directly.
    - We also added support for FUR-like flashing for RAPIDO phones. That means it's possible to flash these phones FBUS-like (completly erased, etc - FBUS protocol emulation). However, because of many problems we've disabled it in current release. You can test it manually by placing "v11.16.0" RAPIDO loaders into \Loaders\BB5\FPIF32BIT.
    * Known problems with RAPIDO 11.16.0 loaders:
    * FBUS support is broken
    * Readed Certificates via USB is broken (Control transactions support up to ~0x90 bytes of upcoming data)
    * Probably not working with Axxxx ROMS (E51)
    * Lot of other issues observed
    - The FUR-like flashing (not ADL though) will be probably enabled in next version after closer investigation
    - Fixed oclHashCat COD File bugs (occurs when last digit of imei is 0)
    - Box Firmware v01.62 Released
    - Minor changes and bugfixes

    All, of course, standalone and free Tested with:

    Nokia
    Firmware v01.62 is required for this installer.

    Where from download?
    http://www.karwos.hk/CycloneBoxInstaller.exe

    Best Regards,
    Cyclone Team

  10. #50
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box Installer v1.15 Released

    --------------------------------------------------------------------------------

    Hi, new update for Cyclone Box is Ready.
    What's new ?


    Quote:
    =====================
    Installer v1.15
    18.06.2011
    =====================
    - Added READING DCT4+/XGold1 Encrypted Security Code from DCT4+ Based phone (previously shown as Crypted DCT4+) - of course WITHOUT data loss - seems 1st in the world
    - Added RESET (to 12345) DCT4+/XGold1 Encrypted Security Code from DCT4+ Based phone - of course WITHOUT data loss - seems 1st in the world
    - Added Reading Full RPL (NPC,CCC,HWC,SIMLOCK,SD,...) from Dead/Downgraded/Security Wrong BB5 Units - seems 1st in world. If phone doesn't power on (Stuck on Nokia logo, or completly dead), you can now dump full RPL file in order to Full Erase your phone and revive it. Softwar before dumping RPL in Recovery mode, will ask user of doing so. So in any case of reviving downgraded phone is:
    1. Create RPL from Dead Phone
    2. Full Erase
    3. Write any SW version
    4. Write previously backed-up RPL file
    5. Authorize with SuperDongle
    6. Write virgin PM
    - Added (fixed) NCK Counter Reset for XGold2 based phones
    - SecurityBlock is now backed-up before NCK Counters Reset, just in case
    - XGold1 Dead units booting fixed
    - Separate button for Receiving L7 Code for LBF added
    - Fixed DCT4 Security Counter Attempts Reset for some DCT4 variants
    - PMM Managment Tab added to BB5 Security Tab
    - Auto-Imei RESTORE added. Used if you have corrupted your imei, but having valid NPC file. Will scan StoredFiles for CRT file matching with CMT Public ID and automaticlly write it.
    - Added DCC camera Hardware Fault alert on DCC repair - some units is hardware fault and repair is not possible (DCC file not found)
    - XGold1 PMM parsing fixed (While reading LBF, Simlock table not found for some operators/phones)
    - XGold2 Flashing problems fixed (Invalid pointer)
    - USB transactions module rewritten
    - Full Erase button added for BB5 mobiles. No need to know FlashChip mapping and size - it's scanned automaticlly. It will erase CMT flash completly. Make sure RPL and PM is readed before erase!!!
    - Added "Just NPC" option used with "Erase Certificates". Used to delete only NPC certificate (corrupt IMEI and switch phone-on to make necessary job ... with IMEI corrupted phone will switch on even without valid security area). You can use this function to dump PM from non-working phone. Don't forget to CREATE RPL FROM PHONE first! Else you will get corrupted IMEI.
    - "Force Use Server" added for SX4 Authorization.
    - Fixed AutoSelecting bug
    - Fixed problem with parsing DCT4 variants when no DCT4 products installed
    - Fixed problem with parsing BB5 variants when no BB5 products installed
    - Index out of bound (0) fixed
    - Plain RPL is checked now by default
    - Removed "Bootloader upgrade problem" message, as caused too much confusion
    - Security Problem #1 and #2 Fixed (anti-idiot-fix)
    - Added additional Security Problem #5 message for Reinstall Drivers
    - Minor changes and bugfixes

    Where from download?
    http://www.karwos.hk/CycloneBoxInstaller.exe

    Best Regards & Stay Tuned,
    Cyclone Box Team

  11. #51
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box Update Again, Standalone Blackberry MEP1,MEP2,MEP3,MEP4,MEP5 CALC ADDED

    --------------------------------------------------------------------------------

    Hi,


    Quote:
    - Blackberry Module is standalone now, no need server connection
    - MEP List combobox updated (237 meps), if not supported - type manually
    - Added MEP-1 (SIM Card) to Requested MEP gro*****
    - Added MEP-3 (Network Subset) to Requested MEP gro*****
    - Added MEP-5 (Corporate) to Requested MEP gro*****
    - Box firmware v01.63 is required
    - After activating new firmware, box have internal 50 phones limit counter for security reasons. Each calculation drops counter. After reaching 0, Blackberry and XGold (use same slot) service is simply deactivated. To make it working again - just upgrade your box by Box Maintenance again - no re-activation fees, at all.

    Where from download?
    http://www.karwos.hk/Cyclone.exe

    1. Make sure you've installed Installer v1.15 installed first
    2. Upgrade your box firmware to v1.63

    Best Regards & Stay Tuned,
    Cyclone Team

  12. #52
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    SuperDCT4 Free for EVERY Cyclone Box

    --------------------------------------------------------------------------------

    we've activated SuperDCT4 for EVERY Cyclone Box. No need to spend up initial credits



    Enjoy!!

    Discussion Thread
    Starting from today SUPERDCT4 Activation is activated FREE for every box! Enjoy!



    br
    Cyclone Box Team

  13. #53
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box Firmware v01.66 Released

    --------------------------------------------------------------------------------

    Hi, this is server-side update only, upgrade your box using Box Maintenance.

    - MEP-31845-002 - added
    - MEP-41261-001 - added
    - MEP-42517-001 - added
    - MEP-08589-001 - fixed NCK length
    - Changed default SX4 Emulation Serial Number due to blacklist by Nokia in latest PA_SD. Now SX4 serial is calculated using box unique OTP Area, so quite randomfull and further blacklist not possible too.
    - Minor Changes and bugfixes

    Best regards N Stay Tuned,
    Cyclone Team

  14. #54
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box Installer v1.16 BLACK EDITION RELEASED

    --------------------------------------------------------------------------------

    =====================
    Installer v1.16
    Black Edition
    21.09.2011
    =====================



    MAJOR FUNCTIONS ADDED
    - New BB5 FBUS/USB Loaders v11.24.00 Introduced
    - Added Dead USB Flashing for RAPIDO and other FUR-over-USB operations (DO NOT USE FOR CERTIFICATE READ/WRITE!), still "old method" avaiable in connection tab.
    - Certificates operations for Rapido FBUS-OVER-USB disabled, because is not supported by loaders ( it will fail without any attempt )
    - Rapido Alive FUR-over-USB flashing not supported, flash those phones by Dead variant instead (Switch to RAW mode problem in this models..), or "Old USB Flashing Method"
    - "Use OLD USB FLASHING METHOD" moved to BB5/Flashing tab
    - "Settings" tab renamed to Connection
    - TX2 settings removed from BB5 Flashing Tab
    - RAPU Flashing/Booting Improved
    - C2-02 XGold2 Flashing "Added" - Cyclone has flashing compatibilty for this model, but MassMemory file couldn't be handled becasue too big. Fixed.
    - BB5 Mass Memory Flashing Tested - Cyclone SW has this posibility from long time ago...
    - Added "Read Unique Data" button. Use to boot phone by Flashbus directly, and dump Unique Data (for Simlock,SD,...) when phone doesn't have correct BSI resistors value. Dumped unique data might be lately used for USB operations if still FBUS operations fails.
    - Old DCT4 Asic 2,5,6,7 Direct Unlock/Relock/Autolock Introduced, finally
    - Standalone DCT4 RPL Calculation Introduced, supported Asics: 2,5,6,7,11
    - Added support for DCT4 (7250i, 6610i, 2125i, 2865i, 6275i) Product Data RPL Entity Writing for fixing CS
    - Added support for generating extended DCT4 RPL with Product Data for above models (CS problems)
    - Alcatel Calculator added to gui
    - PMM Protection Checkbox added upon PM write. Use to protect PM security fields.
    - Diagnostic Module Added
    - Selftests moved to new "Diagnostic" module
    - Vibra Tests Added
    - Backlight Tests Added
    - "Autodetect" added for DCT4 Unlocking. Unique method - non ASIC dependand (i.e. avoids RM-189 2310 problems avaiable on all boxes right now). If there is problems with autodetection - user still can select unlocking method manually.
    - Removed DCT4 ASK-RPL From Credits Manager
    - Removed SuperDCT4 Activation from Credits Manager
    - StatusBar messages are more accurate now
    - Added "Auto-Rebuild IMEI" checkbox for "Read UEM IMEI" function. Used to automatically generate FLASH IMEI DATA and programm it - one-click REPAIR ??????????????4.
    - CacheV2 Introduced
    - XGold1/2 Flashing Routines rewritten to be more memory effective
    - Dead-erased XGold2 flashing improved, plus added some messages regarding to reviving dead XG2
    - USB Connection Type is now selected automatically when XGold2 platform found
    - The supported MEP List are now acquired from box once Blackberry Tool launch
    - Moved UEM stuff to new "ASK/RPL Tool"
    - XGold2 MassMemory flashing added
    - Remaining XGold Credits are now shown upon launching of Nokia Tool (Those one used for XGold1 LBF, Blackberry Codes Service, etc)
    - Default Security Area XGold Service count increased from 50 to 100 (100 phones limit between SA updates for Blackerry,XGold1,...)
    - XGold/Blackberry service is now also checked upon Blackberry tool startup, also after each Code calculation remaining Calculation Limit is displayed
    - Relock files updated for DCT4
    - AutoUpdater Introduced
    - USB Flashing Solved due to wrongly installed Flashing Cable Drivers on some configurations (i.e. Virgin PC)
    - Database Unlock Introduced
    - RPL Write revised
    - PARTNERC certificate support added for Certificate Read
    - PARTNERC certificate support added for Certificate Write
    - PARTNERC certificate support addef for RPL Operations
    - Erase files support added
    - DCC configuration for NIMMIIIIRRFF06150000 added
    - DCC configuration for NIMMIIIIRRFF095A1F05 added
    - DCC configuration for NIMMIIIIRRFF095A1F04 added
    - DCC configuration for NI00IIIIRR0306150018 added
    - DCC configuration for NIMMIIIIRRFF095B1F05 added
    - DCC configuration for NIMMIIIIRRFF0102F201 added
    - DCC configuration for ISL2TI0200000103B840 added
    - DCC configuration for 8600030001040A021001 added
    - DCC configuration for 860003000104094B2F01 added
    - DCC configuration for 86000300010401035424 added
    - DCC configuration for NI00BC000003095B1F00 added
    - DCC configuration for NI00BC0000030102F203 added
    - DCC configuration for NI00BC0000030102F202 added
    - DCC configuration for NI00BC000003095B1F05 added
    - DCC configuration for NI00BC000003095B1F01 added
    - DCC configuration for NI00IIIIRR030C213402 added
    - DCC configuration for NI00IIIIRR030C213401 added
    - DCC configuration for NI00IIIIRR030C20C605 added
    - DCC configuration for NI00IIIIRR03094B2F01 added
    - DCC configuration for NI00IIIIRR0301022E05 added
    - DCC configuration for NI00IIIIRR0301022E01 added
    - DCC configuration for NIMMIIIIRRFF0C206C02 added
    - DCC configuration for NI00IIIIRR0301035602 added
    - DCC configuration for NI00CS0000040C213402 added
    - DCC configuration for NI00CS00000401022E05 added
    - DCC configuration for NI00BC0000040F03F802 added
    - DCC configuration for NI00BC0000040A4E2000 added
    - DCC configuration for NI00BC000004095B1F01 added
    - DCC configuration for NI00BC000004095B1F00 added
    - DCC configuration for NI00BC0000040103B904 added
    - DCC configuration for NI00BC0000040102F201 added
    - DCC configuration for NI00BC00000401022C00 added
    - DCC configuration for 0A4E2007 added
    - DCC configuration for 0103B904 added
    - SX4 Virgin PMs database updated, added RM-256, RM-497, RM-528V, RM-584, RM-586, RM-609, RM-612, RM-626, RM-638, RM-707, RM-712
    - HWC/CCC Templates added for products RM-469, RM-540, RM-566, RM-528V, RM-596, RM-609, RM-614, RM-645
    - Models.ini refreshed
    - Skin Stack Updated
    - Previous updates included
    - Nokia Connectivity Cable Drivers updated to v7.1.42.0
    - Box Firmware v01.73 Released



    BUG FIXES & IMPROVEMENTS
    - Afterwards DCT4 Erase All chips, the Permanent Data aren't restored anymore
    - Fixed DCT4 RPL Write problem when only DATA2 exists in RPL file
    - Fixed problems with handling RAPIDO > v11.16.00 loaders over FBUS (FUR control Add Problem)
    - Check flashing Bus for WD2 fixed
    - Read UEM Imei for WD2 Fixed
    - Read ASK for WD2 Fixed
    - Write RPL for WD2 Fixed
    - Fixed lots of Access Violatios after closing up Nokia Tool
    - Fixed bug with disappearing Tray icon after Minimize to Tray
    - Bruteforce between NCK Fixed
    - PM Write bugs fixed (Access Violation)
    - Fixed bug with Broadcom Read Info
    - Fixed spurious XGold2 product to be displayed in XGold1/DCT4 tab
    - Fixed product mismatch on XG1/XG2 autodetection
    - Fixed invalid Calculation of Mastercode
    - 6230 Flashing Fixed (Given Image not maches with readen UPP Id or Image problem). If problem still exists - select all flashing files _MANUALLY_ don't use INI based (because there exists two HW versions E and M - autoselection is HWID based and may fails anytime).
    - OMAP Loaders Fixed
    - Fixed some wrong FBUS implementation when Packet size mod 0x78 == 0


    Downloads
    LINK1
    http://www.karwos.hk/CycloneBoxInstaller.exe
    LINK2
    http://www.siroya.org/downloads/CycloneBoxInstaller.exe
    LINK3
    http://www.cyclonebox.com/downloads/...xInstaller.exe
    Best Regards,
    Cyclone Team & Eprom Munze konza
    Izmenio Eprom : 22-09-11 u 09:51

  15. #55
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    CycloneBox BlackBerry Module Update(25-09-2011)

    --------------------------------------------------------------------------------

    Hi, new update for Cyclone Box BlackBerry Module is ready.


    Added support for following MEPs:

    MEP-06041-012
    MEP-06041-013
    MEP-14074-004
    MEP-29080-003
    MEP-34870-002




    NOTE
    Just update your box using Box Maintenance. Each box having 3 update credits.



    Still alot more to come so stay tune



    Best Regards,
    Cyclone Team & Eprom Munze konza

  16. #56
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box Firmware v01.75 Released

    --------------------------------------------------------------------------------

    Hi, new firmware for Cyclone Box is just uploaded at server.

    What's new?


    - MEP-10129-006 added
    - MEP-04626-001 fixed length
    - MEP-06529-001 fixed length
    - MEP-06529-002 fixed length
    - MEP-06530-001 fixed length
    - MEP-06530-002 fixed length
    - MEP-07321-002 fixed length
    - MEP-07723-001 fixed length
    - MEP-08881-001 fixed length
    - MEP-08882-001 fixed length
    - MEP-09292-001 fixed length
    - MEP-10073-001 fixed length
    - MEP-18601-001 fixed length
    - MEP-19877-001 fixed length
    - MEP-24660-001 fixed length
    - MEP-30218-001 fixed length

    Update your box using box maintenance.


    Best Regards,
    Cyclone Team & Eprom Munze konza

  17. #57
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box Firmware

    New version v01.76 Released

    --------------------------------------------------------------------------------

    Hi, new firmware for Cyclone Box is just uploaded at server.

    Added support for
    Blackberry
    -MEP-29318-002.

    Best Regards,
    Cyclone Team

  18. #58
    GSM Master rus's Avatar
    Clan br.
    12448
    Registrovan
    Jun 2009
    Lokacija
    BiH "Velika Kladusa"
    Godina
    39
    Br. postova
    736
    Hvala
    646
    Pohvaljen 239 puta u 158 postova
    - Added FIRST IN THE WORLD, FREE, STANDALONE SL3 UNLOCK by BF FOR LATEST TI BASED NOKIA PRODUCTS (RAPUV2 CPU) this includes Nokia 500, Nokia 600, Nokia 700, Nokia 701 and probably more coming !!!!!! These products are 15 NCK chars so not to worry.

    - Added FIRST IN THE WORLD, FREE, STANDALONE SUPERDONGLE REPAIR for RAPUv2 Based Phones

    - Added FIRST IN THE WORLD, FREE, STANDALONE SX4 AUTHORIZATION for RAPUv2 Based Phones

    - Added FIRST IN THE WORLD, FREE, STANDALONE "FULL RPL" BACKUP (include SUPERDONGLE) for latest RAPUv2 phones

    - Added FIRST IN THE WORLD, FREE, STANADLONE DOWNGRADE CAPABILITY for latest RAPUv2 phones

    - Added FIRST IN THE WORLD, FREE, STANDALONE Full Security analysis for RAPUv2 phones

    - Supported interfaces: USB and FBUS

    - Small bug fixes, i.e. PM protection is now unticked by default

    At least firmware 1.74 needed (update isn't needed at all).
    Don't forget to have installed latest v1.16 installer (http://www.karwos.hk/CycloneBoxInstaller.exe), so Auto update module will do the job.

  19. #59
    GSM Guru Johnny's Avatar
    Clan br.
    640
    Registrovan
    Jan 2006
    Lokacija
    Kalesija , Bosnian Kingdom
    Godina
    42
    Br. postova
    170
    Hvala
    122
    Pohvaljen 4 puta u 3 postova
    CycloneBox SL3direct and new MEP-17568-003 Firmware v01.77 Released
    Hi, firmware v01.77 was just loaded to server.
    Added new Blackberry MEP-175683-003 (MTS Moscow, North-West GSM, KB Impuls BeeLine) and
    Added free SuperBB5 (sl3direct) routines.
    STAY TUNED.

    Best Regards,
    Cyclone Team

  20. #60
    Banned Matrix2008's Avatar
    Clan br.
    4718
    Registrovan
    Apr 2007
    Lokacija
    AUSTRIA
    Br. postova
    952
    Hvala
    12
    Pohvaljen 114 puta u 60 postova
    Cyclone Box v1.0.0.11671 Released

    Hi, new update is released.

    - Added PA_SIMLOC30 Original Nokia RPL Write support in SIMLOCK2 format
    - The NCK length is now automatically recognized upon RPL write, so correct NCK array lenght might be assumed
    - Minor changes and bugfixes

    Autoupdate should do the job, in case of any problems (or interrupted update) you can manually download exe from http://www.karwos.hk/updater/Cyclone.exe and place in C:\Program Files\Cyclone Box\

    Best Regards,
    Cyclone Team

  21. #61
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    78
    Pohvaljen 150 puta u 121 postova
    Cyclone Box Exclusive Blackberry Update Released (25-10-2011)
    Hi, new firmware v01.78 was just loaded at server.

    What's new?

    - Added support for Blackberry MEP-06041-016, WORLD'S FIRST
    - Added support for Blackberry MEP-42490-001, WORLD'S FIRST



    Upgrade your box using Box Maintenance and Enjoy ;-)

  22. #62
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box Broadcom Unlocker Released

    --------------------------------------------------------------------------------

    Hi, new update for Cyclone Box is ready.

    Added support for reading Unique Data files for Broadcom 21351 based Nokia Phones (X2, C3, .. and more of them).

    After read Unique Data you can:
    - Unlock SP locks by reading LBF data
    - Backup FULL RPL (including superdonlge) 100% Nokia-Like
    - Repair corrupted Superdongle keys
    - Authorize your phone with SX4 emulation inside box
    - Detailed Security Analysis
    - Downgrade this phones
    - More ...

    X2 Example Uni Data read and Security operation


    Quote:
    Started Phone Security Analysis...
    [Nokia X2-00 USB Phonet]: Port opened OK!
    MCU Version V 04.90
    MCU Date 28-09-10
    Product RM-618 (Nokia X2-00)
    Manufacturer (c) Nokia
    IMEI 352699049966024
    Mastercode 554352325
    Reading Security Block...
    Security block OK and saved to "RM-618_352699049966024_2011-11-12_132245.SecurityBlock.PM"
    Step 1 : Testing SIMLOCK
    SIMLOCK SEFLTEST PASSED OK!
    Step 2 : Testing SECURITY
    SECURITY SEFLTEST PASSED OK!
    Step 3 : Analyzing Security Block
    WARNING: "48400406073ECC4443B83B4151F972ABA08B3D66.C000 3160 " Not Exists, Will read it...
    Reading CYC file from phone...
    Booting CMT...
    [Nokia X2-00 USB Phonet]: Port opened OK!
    Switching to RAW Mode...
    [Nokia USB Flashing Generic]: Port opened OK!
    New ROM Detected
    CMT_SYSTEM_ASIC_ID: 000000000000000022000509200C0000
    CMT_EM_ASIC_ID: 00005361
    CMT_PUBLIC_ID: 48400406073ECC4443B83B4151F972ABA08B3D66
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 1B0D74C532CA1C6133940C740E8C786E
    CMT_BOOT_ROM_CRC: DE56D582
    CMT_SECURE_ROM_CRC: BDDE7A3A
    CMT Ready!
    BCM21351_usb2nd.fg, Type: 2nd Boot Loader, Rev: 513.11.24.0, Algo: BB5
    Using NEW BB5 FLASHING PROTOCOL
    Transmission Mode Requested: Control USB, Accepted: Control USB
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020003000000131, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020003000000131, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Sending Auxiliary Loader...
    Auxiliary Loader Sent!
    Loader: RAPxx CommonBoot v1.07 (C) 2011 KarwosLabs
    Custom loader running OK! Working...
    Cyclone Server (1.0.0.676), Cyclone Box Team 2008-2011 - Ready.
    If phone doesn't powering into Local Mode now for some reason do following:
    1. Re-insert battery
    2. Power it on, when asked use Ovi/Pc Suite Mode
    Readed OK, Saving to "48400406073ECC4443B83B4151F972ABA08B3D66.C000 3160 "
    Checking SUPERDONGLE...
    SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
    Checking SIMLOCK...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking MCU&DSP TIMESTAMPS...
    MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
    Checking CMLA KEYS...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking ECC KEYS...
    ECC KEYS FOUND AND CHECKSUM OK! PASSED!
    Checking DIV KEYS...
    DIV KEYS FOUND AND CHECKSUM OK! PASSED!
    Analyze finished!


    PS1: Server connection and 10 credits (with 100 credits threshold) required to perform Broadcom Uni Data dump.

    PS2: After reading uni data, all operations is standalone (just likely previous basing upon cached data)

    PS3: Server charged credits, but my phone got disconnected during hash read operation, and hash not readen. What to do, what to do? If your account has been charged, the data generated at server are cached too... That means you can repeat process again (previously charging battery, i.e.), server transaction will be succeeded and no credits charged.

    Box firmware v01.82 is required to use this update.
    Software and loaders should be automatically updated.
    In case if you have aborted your update process, and now having problem with running app - you can download

    http://www.karwos.hk/updater/Cyclone.exe

    and place it in your Cyclone directory...

    MORE COMING !!!
    Best Regards,
    Cyclone Box Team

  23. #63
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    CycloneBox Broadcom Logs consumtion changes
    !!!!!!!!!!Goood News !!!!!!!!!!
    We have made changes on server side

    Server will consume now 5 credits for reading LBF from Broadcom phones instead of 10


    Enjoy using your Cyclone Box

    Eprom

  24. #64
    GSM Expert Vlada84's Avatar
    Clan br.
    947
    Registrovan
    Mar 2006
    Lokacija
    Beograd
    Godina
    35
    Br. postova
    945
    Hvala
    125
    Pohvaljen 189 puta u 133 postova
    Cyclone Box FREE and STANDALONE Broadcom Hash Read
    hello

    Broadcom Unlocking (via LBF Hash Read)/SX4 Authorization/SD Repair/etc is now fully FREE and STANDALONE, just simply as previous models.
    No internet connection and credits needed

    Just to remind Cyclone is one box which support all of hashes free and standalone now
    This includes reading data from RAP3Gv3, RAP3Gv4, RAPUv1, RAPUv21 (world's first), Broadcom, XGold1, and shortly from XGold2 (maybe free, maybe with credits, we'll decide).

    NOTE
    No firmware upgrade is needed. Just run Cyclone and it will auto-update main exe + loaders.

    Make sure you have latest installer installed, if not, grab one from http://www.karwos.hk/CycloneBoxInstaller.exe

    Box Firmware version required: v01.82 (from Nov 12)

    No Box FW Upgrade needed if u have that version (1.82).


    Best Regards,
    Cyclone Box Team

  25. #65
    GSM Potencijal ivanx's Avatar
    Clan br.
    842
    Registrovan
    Feb 2006
    Lokacija
    YU
    Godina
    42
    Br. postova
    51
    Hvala
    3
    Pohvaljen 2 puta u 2 postova
    =====================
    Installer v1.17
    20.12.2011
    =====================

    - SE Xperia Unlocker introduced (this is 3rd party addon)
    Supported Phones :
    Xperia X10 Mini - E10i
    Xperia X10 Mini Pro - U20
    Xperia X8 - E15i
    Xperia W8 - E16 - E16i
    Xperia X10
    Xperia X10i
    Xperia X10a
    Docomo SO-01B
    All These Phones supported without TEST POINT

    - Added Real time SE Xperia Unlocker account Creator in 'Credits' tool.
    (This is the best option for Online web shop resellers as Addon works without Box)Reseller can generate accounts real time with box)
    10 Cyclone credits = 1 Xperia phone log
    - BB5 FBUS/USB Loaders v11.40.00 Introduced
    - Introduced previous updates (standalone and free Broadcom unlocking, RAPUv21, etc)
    - PM Protection is now unticked by default
    - PM Protection is automatically unticked during SX4 operations
    - Full Erase for New Protocol APE phones fixed (wrong CMT Flash Device Index selected)
    -Added New bright skin
    - Minor changes and Bugfixes

    Download Links
    http://www.karwos.hk/CycloneBoxInstaller.exe
    Multiupload.com - upload your files to multiple file hosting sites!

    Discussion thread
    21-12-2011 CycloneBox Installer v1.17 with Xperia Addon and more

    br
    CycloneBox Team

  26. #66
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box Firmware v01.83 Released

    --------------------------------------------------------------------------------

    Hi, new firmware is uploaded to server, no need download nothing, just upgrade your box by "box maintenance"

    Added two world's first MEPs:

    MEP-09917-003
    MEP-46976-002

    Enjoy Cyclonebox,
    more to come,
    Cyclonebox Team sikaj rokaj driu djiu ciju i liu

  27. #67
    GSM Potencijal ivanx's Avatar
    Clan br.
    842
    Registrovan
    Feb 2006
    Lokacija
    YU
    Godina
    42
    Br. postova
    51
    Hvala
    3
    Pohvaljen 2 puta u 2 postova
    Hi, new update for Cyclone Box is released.

    What's new?
    - Added support for LBF data read for new XGold110 based phones, this is X1-00, X1-01, absolutly WORLD FIRST
    - Nokia X1-00, X1-01, 100, 101, 102 flashing added
    - 20 Digits is now checked upon XGold1xx Hash Read, as users reported 20 digit phones (i.e. new 1616 from Yoigo Spain). The 20 digits phones will not be readed now, to not loss the computation power of SL3 Clusters.
    - When 20 Digits NCK is found upon BB5 LBF read, operation will be canceled (previously - asked whether to continue, or not), same reason as up
    - Minor changes and bugfixes

    How to update?
    Just run Cyclone, autoupdate will replace Cyclone.exe.

    Join us on facebook: http://www.facebook.com/cyclonebox

    More to come,
    Best Regards,
    Cyclone Box Team

  28. #68
    Product Suporter cezar's Avatar
    Clan br.
    11855
    Registrovan
    Mar 2007
    Lokacija
    REPUBLIKA SRPSKA
    Br. postova
    1.524
    Hvala
    44
    Pohvaljen 205 puta u 130 postova
    Cyclone BOMB AGAIN, Nokia 100/101/102 Unlock Added!

    i to all! New BOMB Update for Cyclone Box is ready Again!!

    What's new ??
    - Added support for unlock by LBF read for latest XGold113 Nokia Phones, this is Nokia 100, 101, 102, again WORLD FIRST
    - Latest XGold110/113 phones is also supported to full RPL Read (IMEI + Simlock), so afterwards Simlock or IMEI could be fully restored - world's first too... Using RPL method also Keypad/FBUS counter might be resetted.
    - Added support for Profile Bits analyze upon LBF dump for XGold1xx, so phones which will not accept code via neither keypad or FBUS handler - Log file will not be readen
    - Minor changes and bugfixes

    How to update?
    1. Run Cyclone Box Software, and autoupdate module will download necessary files. On failure, you can download new exe manually from http://www.karwos.hk/updater/Cyclone.exe and place it at C:\Program Files\Cyclone Box
    2. Also Firmware v01.85 is Required. Update your box via Box Maintenance, or just agree upon first Nokia Tool launch.

  29. #69
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box Fast and Standalone Level1-Level7 NCK Calculator from COD Released

    --------------------------------------------------------------------------------

    Hi to all! New Update for Cyclone Box is ready Again!!

    What's new ??
    - Added Fast Standalone Level1-Level7 Codes Calculator from COD Files, supported format is Common Cyclone COD File, oclHashCat Unix/Windows, MXCrap. Not supported format? Send us file. No more server waiting!
    - SX5 Serial Number injection during Level1-Level7 from COD Calculation is supported. "0" is recommended serials, other may give you - "Wrong code". Use only CHECKED SX5 Serials!
    - Removed Send COD File To Server, Receive Level7 Code, etc routines.
    - Minor changes and bugfixes

    How to update?
    1. Run Cyclone Box Software, and autoupdate module will download necessary files. On failure, you can download new exe manually from http://www.karwos.hk/updater/Cyclone.exe and place it at C:\Program Files\Cyclone Box
    2. Also Firmware v01.86 is Required. Update your box via Box Maintenance, or just agree upon first Nokia Tool launch.

    Join us on facebook: Cyclone Box | Facebook

    Best Regards,
    Cyclone Box Team
    More to come...

  30. #70
    GSM Guru Decoder's Avatar
    Clan br.
    799
    Registrovan
    Feb 2006
    Lokacija
    Srbija , Zemun
    Br. postova
    145
    Hvala
    29
    Pohvaljen 16 puta u 10 postova
    Cyclone Box New Security Blackberry Update Released
    Hi, new firmware v 01.87 for Cyclone Box was just uploaded at server.

    Added new security MEP-12209-010 WORLD FIRST

    Just upgrade your box via Box Maintenance and enjoy.

    Join us on facebook: Cyclone Box | Facebook

    More to come,
    best regards,
    Cyclone Team

  31. #71
    GSM Guru
    Clan br.
    12870
    Registrovan
    Feb 2010
    Lokacija
    Kosovo i Metohija
    Br. postova
    134
    Hvala
    2
    Pohvaljen 14 puta u 13 postova
    Hi, new update for Cyclone Box is released.

    Added hash reading for LBF for XGold213 based phones. Operation is free, quick and standalone.
    And now best, you don't need to know phone CPU platform. Just select USB connection, go to BB5 tab, click good old "Read LBF Data" button, and Cyclone will AUTOMATICALLY detect if this is xgold213, or Texas Instruments based product.

    Supported models:

    Asha 200 RM-761
    Asha 200 RM-762
    C1-01 RM-607
    C1-01 RM-608
    C1-02 RM-643
    C1-02 RM-644
    C2-00 RM-704
    C2-02 RM-692
    C2-02 RM-693
    C2-05 RM-724
    C2-05 RM-725
    C2-03 RM-702
    C2-06 RM-702
    C2-07 RM-692
    C2-08 RM-702
    X2-02 RM-694
    X2-05 RM-772


    Release Notes
    1. You should have installed latest installer from http://www.karwos.hk/CycloneBoxInstaller.exe (this one released at October 2011, most users don't need thus)
    2. Autoupdate will work, if not, download new exe manually from http://www.karwos.hk/updater/Cyclone.exe
    3. If you encountering Autoupdate problems, check firewall.
    4. After updating, make sure on bottom-right statusbar you have "No updates avaiable". This updates also downloading XMM2130 loaders from server, so make sure before you start LBF'ing XGold213, you get "No updates avaiable" - this will ensure your 100% success reading LBF data.
    5. New firmware v01.88 is required. Update box using Box Maintenance. Please be patient during upgrade progress and don't disconnect your box. We have increased update tries credit numbers from 3 to 5, because of some users problems with update process.

    Join us on facebook: Cyclone Box | Facebook

    Best Regards,
    Cyclone Team

  32. #72
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box Iphone/Ipad Imei Analyzer

    --------------------------------------------------------------------------------

    As Promised

    CycloneBox present Iphone/Ipad Imei Analyzer

    for more details Click Here



    Still more to come
    br
    CycloneBox Team

  33. #73
    GSM Guru
    Clan br.
    12870
    Registrovan
    Feb 2010
    Lokacija
    Kosovo i Metohija
    Br. postova
    134
    Hvala
    2
    Pohvaljen 14 puta u 13 postova
    Hi, new Firmware for Cyclone Box Classic was just uploaded to server.

    Firmware: Cyclone Nokia/Blackberry Application v01.89, (Mar 29 2012 16:06:54, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011

    Added support for new Blackberry MEPs:
    MEP-09292-009
    MEP-11534-009

    Just use Box Maintenance to upgrade your box.
    You have 5 tries to do that.

    What else... server was rewritten almost from scratch few days back. That means uptime should be 99.9% right now, we eliminated major overload problems out there.

    Join us on facebook: Cyclone Box | Facebook

    Best Regards,
    More to come,
    Cyclone Box Team

  34. #74
    GSM Guru
    Clan br.
    12870
    Registrovan
    Feb 2010
    Lokacija
    Kosovo i Metohija
    Br. postova
    134
    Hvala
    2
    Pohvaljen 14 puta u 13 postova
    Cyclone Box USB 3.0 Bootloader v3.00 Released

    --------------------------------------------------------------------------------

    Hi, new Bootloader for Cyclone Box is ready!

    What's new?
    - Built from scratch
    - More startup stability
    - Much better smartcard initialization routines
    - 2x faster (previous boot main fw update - ~20secs, new one ~11secs)
    - USB 3.0 Compatibility == 4x faster from Initial Bootloader!

    Upgrade box using new bootloader, usb 3.0 mode



    Quote:
    Box Maintenance procedure started at 16:21:42
    Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
    Bootloader: Cyclone Classic Common Bootloader v3.00, (Apr 6 2012 16:14:55)
    Service Tag: 0D1BB140D1F7F2475586D877E7357B6E
    Connecting to Cyclone Server
    Cyclone Server (2.0.0.4), Cyclone Box Team 2008-2011 - Ready.
    ========= Box Info =========
    Box SN: C000xxx
    HW Revision: B, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2009, wk23 / wk19
    Set: Classic Box, TX2 Adapter, 100 Credits, 6 Months Warranty
    Box registration status: Registered OK
    Paired Card SN: xxx
    First Name: xxx
    Surname: xxx
    Nickname: xxx
    Address: xxx
    Country: xxx
    E-Mail: xxx
    Reseller: GPGIndustries, China
    Warranty Start Date: 2012-02-16
    Warranty Period (months): 6
    Warranty Stop Date: 2012-08-16
    Warranty active: Yes
    ============================
    Updating Security Area...
    Security Area Updated, Took: 0.31s
    Updating Main Firmware...
    Main Firmware Updated, Took: 6.240s
    Updating COM Emulator Firmware...
    COM Emulator Firmware Updated, Took: 0.390s
    Updating Secure Bootloader...
    Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
    Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
    Firmware: Cyclone Nokia/Blackberry Application v01.89, (Mar 29 2012 16:06:54, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
    Boot Agent: Cyclone Secure BootAgent Server v3.01 (C) KarwosSoft 2010 wk41
    Bootloader is already Up-to-date
    Secure Bootloader Update Skipped
    Disconnected from Cyclone Server
    Box Maintenance finished successfully

    USB 2.0 Mode


    Quote:
    Box Maintenance procedure started at 16:24:19
    Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
    Bootloader: Cyclone Classic Common Bootloader v3.00, (Apr 6 2012 16:14:55)
    Service Tag: 0D1BB140D1F7F2475586D877E7357B6E
    Product: Classic
    Connecting to Cyclone Server
    Cyclone Server (2.0.0.4), Cyclone Box Team 2008-2011 - Ready.
    ========= Box Info =========
    Box SN: xxx
    HW Revision: B, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2009, wk23 / wk19
    Set: Classic Box, TX2 Adapter, 100 Credits, 6 Months Warranty
    Box registration status: Registered OK
    Paired Card SN: xxx
    First Name: xxx
    Surname: xxx
    Nickname: xxx
    Address: xxx
    Country: xxx
    E-Mail: xxx
    Reseller: GPGIndustries, China
    Warranty Start Date: 2012-02-16
    Warranty Period (months): 6
    Warranty Stop Date: 2012-08-16
    Warranty active: Yes
    ============================
    Updating Security Area...
    Security Area Updated, Took: 0.94s
    Updating Main Firmware...
    Main Firmware Updated, Took: 11.575s
    Updating COM Emulator Firmware...
    COM Emulator Firmware Updated, Took: 0.749s
    Updating Secure Bootloader...
    Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
    Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
    Firmware: Cyclone Nokia/Blackberry Application v01.89, (Mar 29 2012 16:06:54, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
    Boot Agent: Cyclone Secure BootAgent Server v3.01 (C) KarwosSoft 2010 wk41
    Bootloader is already Up-to-date
    Secure Bootloader Update Skipped
    Disconnected from Cyclone Server
    Box Maintenance finished successfully

    Just upgrade your box using Box Maintenance.

    Join us on facebook: Cyclone Box | Facebook

    CYCLONE BOX - POWER ON AND UPGRADE!

    Stay tuned

    Best Regards,
    Cyclone Team

  35. #75
    GSM Guru
    Clan br.
    12870
    Registrovan
    Feb 2010
    Lokacija
    Kosovo i Metohija
    Br. postova
    134
    Hvala
    2
    Pohvaljen 14 puta u 13 postova
    CycloneBox Reloaded Launched and new Installer v1.20

    --------------------------------------------------------------------------------

    CycloneBoX Installer v1.20 (04.05.2012)

    Things which introduced in new Version

    - New Faster and reliable Hw introduced (Cyclone Box Reloaded)
    - New Loaders v11.50.00 added
    - FastMM v4.99 Introduced
    - MEP-40488-004 added
    - Xgold113 (Dual-sim) RPL write support added- Project completly refactorized from scratch. Compiler changed from obsolete Delphi7 to Delphi2007. Just because of this, lots of stability and speed improvment gained.
    - "News" added in main window
    - "New Super Easy Downgrade" BB5 method added (Backup,flash,downgrade,restore rpl all just in one click)Tick in before-flash tasks
    - Added Windows 7 interactive progressbar when minimized to tray. When software is minimized, you will notice status of current job: green progressbar - working, red progressbar - error, yellow-paused, etc
    - Boot recovery added for all boxes during box wizard
    - Added COD->NCK verification upon data generation
    - After COD->NCK calculation, NCK codes are automatically stored inside COD file
    - New Paths is now addded to default Flash Path Search table (C:\Users\xxxx\AppData... etc)
    - Box wizard Added; this is all-in-one tool which will: repair, upgrade, activate, register, bootloader recovery, smartcard refill, bootloader upgrade, etc your box. Just one click.


    Improvements

    - No need anymore to tick "Old USB flashing method" manually, it's detected automatically
    - When Windows 7 is detected, software is not hidden to tray
    - Bootloader reverted to v2.13 (temporary solution, v3.01 will get back soon)
    - Automatic smartcard refill when empty addded
    - Software is redesigned now. To gain full funcionality YOU DON'T NEED run as "Admin". This means you can be ensured about our software quality and security - no hidden trojans (as happened before with other products).
    - Splash updated
    - Box Registration module removed (box wizard introduced)
    - Box Maintenance module removed (box wizard introduced)
    - Card Maintenance module removed (box wizard introduced)
    - The paths is now updated on each sw startup
    - Only one copy of Cyclone Box application can be launched now, this improves stability
    - "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
    - Skin Stack Updated to v7.62


    Bug Fixes

    - Windows7 Permission issues fixed (needed "Run as admin" to work properly with autoupdate)
    - Fixed Windows7 Save Paths/Settings problem
    - BB5 loader problems when skin enbled (ROM refused...etc)
    - Access violation on exit fixed
    - CBUS Lost Handle Fixed
    - "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
    - libeay/ssleay libraries updated to latest one, much more fast and stable
    - NCK Code Sending fixed for SIMLOC30 phones (0x01 error)
    - Fixed tray issues
    - Autoupdate code is now checking for installed installer, if obsolete then asks for download latest version
    - Improved RPL backup in USB mode (Custom Loader didn't reset phone to FlashMode, and some backups did contain Superdongle/Simlock data only)
    - XGold/Blackberry Service "Credits" renamed to "Counter" (because it is a counter, not real fee-credits), as it puts too much confusion
    - "security problem #1" solved on those who copied cyclonebox.dll before
    - Fixed interrupted auto-update problems (after restart - this is not valid Win32 application)
    - Minor changes and bugfixes

    Important Notes

    1. If you are using old (Classic) Cyclone Box and having old Card serial number (2009,2010) and after latest
    bootloader upgrade, your box can't enter into bootloader mode, your box boot need Recovery. This will be proceeded AUTOMATICALLY, just use Box Wizard.
    2. Box Maintenance, Box Registration, Card Maintenance are removed from this release
    3. Your box having 3 update credits from now
    4. Box Firmware v02.01 is required, so this update could be operational
    5. Use "Box Wizard". This is one-click tool for box repair (boot recovery), upgrade, activation, registration, smartcard upgrade/initialization, and so on.
    6. If you are using Windows 7, autoupdate in old version may fail (fixed already). In case download installer directly, or run SW with Admin privileges.
    7. ALWAYS fresh installer you could find at: http://www.karwos.hk/CycloneBoxInstaller.exe
    8. Autoupdate after updating EXE should ask you for downloading and installing latest installer. If something will fail during Autoupdate process, just look at 7 and download Installer manually.

    CycloneBox Reloaded Official Discussion thread
    CycloneBox Reloaded Launched and new Installer v1.20



    CycloneBox Classic and Reloaded Official Website
    CYCLONE BOX - RELOADED


    Cyclone Team Official Facebook page
    www.facebook.com/cyclonebox


    Best Regards
    CycloneBox Team

  36. #76
    GSM Guru
    Clan br.
    12870
    Registrovan
    Feb 2010
    Lokacija
    Kosovo i Metohija
    Br. postova
    134
    Hvala
    2
    Pohvaljen 14 puta u 13 postova
    14-05-2012 FREE CycloneBox Added all LG Phones Unlock By Imei

    --------------------------------------------------------------------------------

    CycloneBox Added ALL LG Phone Unlock by imei

    For more info Click HERE


    BR
    Cyclone Team

    blue.jpg

  37. #77
    GSM Guru
    Clan br.
    12870
    Registrovan
    Feb 2010
    Lokacija
    Kosovo i Metohija
    Br. postova
    134
    Hvala
    2
    Pohvaljen 14 puta u 13 postova
    [20-05-2012]CycloneBox Reloaded BlackBerry Module Updated

    --------------------------------------------------------------------------------


    Firmware v02.02 Released for Classic and Reloaded boxes!



    -BlackBerry MEP-11534-010 Added (FIRST IN THE WORLD)!
    - Support for MEP-09292-008 Fixed!


    Just use “Box Wizard” to upgrade your box Firwmare!
    Stay Tuned , Coming back Shortly with More Hot Stuff

    BR
    CycloneTeam

  38. #78
    Balkan GSM Team darkskir's Avatar
    Clan br.
    575
    Registrovan
    Dec 2005
    Lokacija
    T.M.
    Br. postova
    751
    Hvala
    187
    Pohvaljen 373 puta u 172 postova


    !!!!! World First Update !!!!!

    - Nokia N9 Security Code Read Added WITHOUT DATA LOSS, WORLD FIRST !!!
    - Nokia N9 Phonet connectivity added, WORLD FIRST, you can now safetly read info from your phone like from normal BB5 phones...
    - Nokia N9 SX4 Authorization Added, WORLD FIRST
    - Nokia N9 Security Repair Added (SX4+PM), WORLD FIRST
    - Nokia N9 Read ASK file via FBUS Added, WORLD FIRST
    - Nokia N9 PM Read Added, WORLD FIRST
    - Nokia N9 PM Write Added, WORLD FIRST
    - Nokia N9 Factory Defaults Setting added without flashing, WORLD FIRST
    - Nokia N9 Mode Change added (can switch to LoCAL/TEST mode now, WORLD FIRST)
    - Nokia N9 Selftests Added, WORLD FIRST
    - Nokia N9 Reset FBUS/KEY NCK Counter Reset ADDED, WORLD FIRST
    - Nokia N9 Send NCK via FBUS Added, WORLD FIRST
    - N9 OMPA3630 Boot Support Added
    - Factory BB5 RPL Writing Fixed
    - DCT4 BT Flashing Fixed on some BT HW (i.e. 12/11 for 6230i, thx Pulka for reporting)
    - Fixed PM Read on some Phones
    - Minor Changes and Bugfixes


    NOTE :
    Just run Cyclone and autoupdate module will update your installation.
    Make sure you have latest installer installed.
    Firmware update IS NOT NEEDED for this update.

    Few tests, Security Code Read w/o data loss :

    Kod:
    [Nokia N9 USB Phonet]: Port opened OK!
    Security Code 12345
    Attempts 00
    SX4 Authorization (Make sure FORCE SX4 SERVER is TICKED)

    Kod:
    [Nokia N9 USB Phonet]: Port opened OK!
    MCU Version Vp 92_11w21
    MCU Date 26-05-11
    Product RM-696 (Nokia RM-696)
    Manufacturer (c) Nokia
    IMEI 357923041454648
    Mastercode 555726146
    SX4 Status: Not authorized (74)
    Started mutual authenthication with card...
    Cyclone Server (2.0.0.42), Cyclone Box Team 2008-2012 - Ready.
    Receiving Phone Seed 1...
    Phone Seed 1 Received
    Sending calculated Data 1, and expecting Seed 2...
    Calculated Data 1 accepted, Phone Seed 2 Received
    Sending calculated Data 2
    Calculated Data 2 sent, Checking Authorization Status again
    Authorization successfully finished!
    Looking for Virgin PM In Database...
    Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button
    Disconnected from Cyclone Server
    And just basic read info...

    Kod:
    [Nokia N9 USB Phonet]: Port opened OK!
    MCU Version Vp 92_11w21
    MCU Date 26-05-11
    Product RM-696 (Nokia RM-696)
    Manufacturer (c) Nokia
    IMEI 357923041454648
    Mastercode 555726146
    IMEI Spare 3A75290314546404
    IMEI SV 3375290314546404F0000000
    CNT DFL61_HARMATTAN_10.2011.31-3.343.2.343
    PSN CZG234989
    Product Code 059L7Z9
    Module Code 0204965
    Basic Product Code 059G8V7
    PSD 0000000000000000
    WLAN MAC 04A82A204D8F
    Bootcode 2.0.49
    Camera 0b:0125:02
    APE SW 10.2011.34.1.341.01.2, V 1.2.122, RM-696, (c) NOKIA.
    APE Test V 1.2.122
    APE HW 1507
    APE BT 00060000060d0020
    RETU 11
    TAHVO 00
    AHNE 21
    Asic 0
    HW Signature
    Simlock Server
    Simlock Key 2440700000000000
    Simlock Profile 0000000000000003
    Simlock Aux
    Simlock IMEI
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [1,2] State: OPENED Type: GID Data: FFFF
    Simlock [1,3] State: OPENED Type: GID Data: FFFF
    Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [2,2] State: OPENED Type: GID Data: FFFF
    Simlock [2,3] State: OPENED Type: GID Data: FFFF
    Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [3,2] State: OPENED Type: GID Data: FFFF
    Simlock [3,3] State: OPENED Type: GID Data: FFFF
    Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [4,2] State: OPENED Type: GID Data: FFFF
    Simlock [4,3] State: OPENED Type: GID Data: FFFF
    Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [5,2] State: OPENED Type: GID Data: FFFF
    Simlock [5,3] State: OPENED Type: GID Data: FFFF
    Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [6,2] State: OPENED Type: GID Data: FFFF
    Simlock [6,3] State: OPENED Type: GID Data: FFFF
    Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
    Simlock [7,2] State: OPENED Type: GID Data: FFFF
    Simlock [7,3] State: OPENED Type: GID Data: FFFF
    Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
    Auto Selecting Flash Files on User Request...
    [Nokia N9 USB Phonet]: Port opened OK!
    Product Code: 059L7Z9
    Scanning avaiable products...
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
    Processing C:\Users\karwos\Desktop\DP\...
    Found 14 products, Filtering DCT4 Products - wait...
    5 Products left after filtering. Ready.
    Scanning avaiable products...
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
    Processing C:\Users\karwos\Desktop\DP\...
    Found 14 products, Filtering BB5 Products - wait...
    8 Products left after filtering. Ready.
    This is Valid BB5 Product
    Retrieving Variants for Product RM-696 - wait...
    1 Variants Retrieved
    No variant found with given Product Code, selecting first one
    Stay tuned,
    More to come,
    Cyclone Team

  39. #79
    GSM Guru
    Clan br.
    12870
    Registrovan
    Feb 2010
    Lokacija
    Kosovo i Metohija
    Br. postova
    134
    Hvala
    2
    Pohvaljen 14 puta u 13 postova
    Cyclone Box Firmware v02.03 Released

    --------------------------------------------------------------------------------

    Hi, new firmware for Cyclone Box is ready.

    What's new?
    - Added support for Blackberry MEP-14896-006 - FIRST IN THE UNIVERSE

    Just update your box using "Box Wizard".

    Join us on facebook: Cyclone Box | Facebook

    Best Regards,
    Cyclone Box Team

  40. #80
    GSM Guru
    Clan br.
    12870
    Registrovan
    Feb 2010
    Lokacija
    Kosovo i Metohija
    Br. postova
    134
    Hvala
    2
    Pohvaljen 14 puta u 13 postova
    Cyclone Box Firmware v02.04 Released

    --------------------------------------------------------------------------------

    Firmware v02.04 Released.

    Added support for Blackberry MEP-27501-001
    Added support for Blackberry MEP-09292-007

    Just use Box Wizard to update your box

    Stay tuned,
    More to come,

Strana 2 od 3 PrviPrvi 123 PoslednjiPoslednji

Slicne teme

  1. HWK update 28/10/2007
    Postovao XisiX u forumu HWK
    Odgovori: 25
    Zadnji post: 31-10-07, 20:57

Pravila postovanja

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •