Strana 1 od 3 123 PoslednjiPoslednji
Prikazivanje rezultata 1 do 40 od 91

Tema: CycloneBox Update!!!

  1. #1
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova

    CycloneBox Update!!!

    *** 9 May - New DCT4Plus Supported for Unlock/Relock ***
    Hello,
    added:

    2680 v06.31
    2680b v06.31
    5000d v06.17
    5000d-b v06.17

    Download update pack from: http://rapidshare.com/files/23100290...clone_5May.rar

    And put in your "UnlockData".

    Best Regards,



    ** 12 May - Firmware v1.04 AVAIABLE ! **
    Hello,
    New firmware revision was just compiled and uploaded to our server

    Cyclone Nokia Application v1.04, (May 12 2009 00:28:13, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: CONST-TX2-PIN ; VISTA-SUPPORT

    We have rewritten DCT4 booting routines (and finally reproduced 1680c booting problems).
    That means 1680c and other phones booting problems was solved.
    Upgrade your boxes and DCT4 booting problems will go away.
    As usually each customer having 2 update credits,
    so if something will go wrong during update (power failure, etc, etc, etc),
    just go back and Maintenance your box again.

    To upgrade your box, it needs be booted into bootloader mode.
    Best way is to disconnect USB cable and connect it again.
    Box will launch in bootloader mode, and now you can use
    "Maintenance box" function from "Maintenance" module,
    thus will upgrade your box.


    Best Regards,

  2. #2
    Balkan GSM Team darkskir's Avatar
    Clan br.
    575
    Registrovan
    Dec 2005
    Lokacija
    T.M.
    Br. postova
    751
    Hvala
    187
    Pohvaljen 373 puta u 172 postova
    !! Cyclone Installer v1.02 Released !!
    Finally Here we go with our major update

    ======================
    == Installer v1.02 ==
    ======================
    - RAP3Gv2 PA_SL - SP Initialization added (unlock, SP Rebuild)
    - RAP3Gv3 PA_SL - SP Initialization added (unlock, SP Rebuild)
    - RAP3Gv3 PA_SL2 - SP Initialization added (unlock, SP Rebuild)
    - RAPIDO PA_SL - SP Initialization added (unlock, SP Rebuild)
    - RAPIDO PA_SL2 - SP Initialization added (unlock, SP Rebuild)
    - SX4 Bypass added after PA_SL2 Unlock, if needed
    - "Create RPL from phone" added. This is used to backup possible security data from phone in original NMP RPL format (plain one) this includes WMDRM Backup, All low-level certs (Nokia Public Certificate, Common Configuration Certificate, Hardware Certificate, VARIANT Cert), and Original SIMLOCK (only on PA_SL2 Phones !! ), which can be used to simlock restore / counter reset / PM 308 recreate - if needed - this data is sent directly to SIMLOCK SERVER directly so SL recreate is 100% "legal"
    - Added Codes Counter Reset for PA_SL2 phones. Used to reset Keyboard/FBUS Code Counter.
    - Added BB5 NCK Code FBUS Send (#pw+xxxxxxxxxxxxxxx+y), use especially when Keyboard counter is locked.
    - Added BB5 NCK COde KEYBOARD Send (#pw+xxxxxxxxxxxxxxx+y), use especially when FBUS counter is locked.
    - BB5 SL Export added. This exporting phone configuration key + simlock blocks to "SL5" file
    - BB5 SL Import added. Used to import previously exported "SL5" structure to phone upon BB5 SP Initialization.
    - BB5 PM -> Simlock RPL added, if PA_SL2 phone - use if simlock has been corrupted, and you have only PM backup. If PM have needed fields, it will create plain RPL file which can recreate simlock for you without headache.
    - SL5 Creator support for Creating Relocked SL5 for desired MCC+MNC / Profile Bits
    - Added "BB5_Autolock_IMSI.sl5" in UnlockData. Use with IMPORT SL5 in order to AUTOLOCK BB5 phone to IMSI (one sim card).
    - Added "BB5_Autolock_MCCMNC.sl5" in UnlockData. Use with IMPORT SL5 in order to AUTOLOCK BB5 phone to MCC-MNC (operator).
    - BB5 Plain RPL Write added.
    - Added "UB Backup" option while writing BB5 Plain RPL (SIMLOCK AREA), since they aren't adding SHA-1 before SIMLOCK_DATA in RPL file - it needs be skipped in case.
    - Added "Erase Security" option before RPL write. This is used when phone have problem with PM 308 blocks (downgrade, for example) and can't boot to accept superdongle / simlock data - in case, no need to full erase in case. Keep note that after RPL write YOU NEED SX4 Authorization with server and writing PM Fields 1 and 309. Otherwise your phone will fail to pass ST_SECURITY_TEST, and in effect will not boot.
    - Skin stack updated to v6.30, this is more stable and fast
    - Product code send added
    - HWID send added
    - PSN send added
    - DCT4 Nand MASS MEMORY Partitioning added before write. May be skipped ticking apporiative Skip MM Part button.
    - When no patch file found, SW will generate unlock codes for DCT4 unlock (asics 2,5,6,7)
    - Security Code Mastercode is now being generated upon read info
    - Added "Skip Patching" Option. Use for DCT4plus phones which are patched already, and all you need is to Initialize SP locks again (relock, etc)
    - DCT4 NCK Key / FBUS Count is now being readed correctly
    - DCT4 UEM OTP Imei Read added
    - DCT4 SP Locks are being parsed upon read
    - Added full support for Vista OS
    - Added support for 64bit CPUs - tested on X64 XP Professional, should work on NT6 too
    - BB5 Simlock backup before flash write no more asking user for directory, it's automaticlly saving to StoredFiles
    - BB5 Simlock backup automatically saving backup in RPL format if possible (PA_SL2 phone detected), otherwise it will save it in PM format
    - BB5 Booting routines totally refactorized
    - After DCT4 Page erase, the last-error-status is now queried from phone
    - Data checksum is now being checked again upon BB5 Flash Write
    - When NPC Certificate are being backed up during SX4 Bypass, it is now stored as "PUBLIC_ID.Sx4Bypass.NPC.CMT.CRT", not "DowngradeRepair" as before
    - When Writing BB5 Cert, it's now default pointing to StoredFiles
    - User is now being warned before "Erase all certificates" - BB5 (avoid mistakes)
    - For now, Erase All Certs erasing APE certificates too, if APE unit found
    - DCT4 Plus 2680 v6.82 unlock partial fixed
    - 2630 v57.20 Unlock added
    - 2630b v57.20 Unlock added
    - 2630b v06.82 Unlock added
    - 2760b v06.82 Unlock added
    - 2600c-b v06.82 Unlock added
    - 1680c v06.82 Unlock added
    - 1680c-b v06.82 Unlock added
    - 5000db v 05.27 Unlock added
    - 5000db v 05.45 Unlock added
    - Included old "new security" unlock partials for 2630, 1680, 5000, 2680 - v6.82
    - FastMM problem after exiting Main Application fixed
    - Some DCT4Plus unlock bugs fixed (like This is Invalid Integer...)
    - Added WD2 CBUS BT Phones support (bluetooth flashing problems)
    - Check Flashing Bus (BB5) now booting phone completly, not only fetching 1st Boot Data
    - Fixed problem when sometime wrong CMT / APE bootloader are being selected upon Certificate Operations
    - Increased FBUS Timeout to repair FBUS transactions problems on some environments
    - Netmonitor activation on DCT4/WD2 added
    - WD2 Format User Area added
    - "Initial SP corrupted" fixed on DCT4plus phones
    - After finished flashing the sound now being played
    - Cyclone HW Revision A112 support added
    - Progressbar issue fixed while BT Flash
    - SX4 Server Transaction fixed
    - Bigger delay added after SX4 Bypass in order to handle PM write correctly
    - More debug messages is now being shown upon BB5 booting
    - Refactorized DCT4 ADSP Flashing routines
    - DCT4 / BB5 Factory defaults after flashing fixed in some cases
    - Minor changes and bugfixes
    - Improved BB5 Local/Test mode changes
    - Support : Fixed "Connection closed gracefully" in some cases
    - Fixed problems when invalid IMEI are being readed out from phone (in case of phone wasn't initialized and FBUS problems occured)
    - PM Write routines rewritten
    - Security card is now being resetted before phone flashing, this have effect on authenthication speed when flashing many phones one by one
    - Selftests routines improved (dynamic timeout)
    - Multiple files can be now choosen upon Writing Certificates saved as "CRT" (Cyclone binary format)
    - BB5 SP Locks now being parsed upon read out (blocks count, block content, etc)
    - DCT4Plus partials with version 6.82 have now removed from supported UPP list ASIC ID "3168" which is not unlockable (for now) with rom 0600 to avoid destroyed phones (no signal), in case you will got message "Not supported UPP ID", but your phone SL area will be untouched and after flash it will still work.
    - Blue screen of death fixed on some configurations
    - After PM Write, Statistics added, so user can easily see how many PM Record written OK / NOT OK
    - IMEI in "Credits" upon calculation is now checked for validity (last digit)
    - Updated Message before using DCT4 RPL Credits - ASIC 11 takes 2 credits and rest 1 credit
    - Main Nokia Firmware v1.03 avaiable, this changes:
    -- TX2 Output pin is now constant (Service Pin 3) due to many mistakes on user side.
    -- Flash write speed optimized, should be around 10% - 30% faster, especially on NAND-ONENAND phones. More optimizations to come.
    -- Erase status is now signalized by USB (red) led.
    -- Added support for WD2 CBUS BT Flashing
    -- BB5 Booting Improved on some environments
    -- RTOS Code Updated to 5.2.0
    -- Microcode USB Stack is now Vista compatible
    -- Removed blue screen of death problem on some XP configurations
    -- Minor bugs, fixes, and improvments
    - Versions snap
    Installer v1.02
    Main x86 Application v1.0.0.7396
    x86 Memory Manager v4.92R2
    Native USB Drivers v1.0.0.4
    USB-COM Stack Drivers v1.0.0.0
    Onboard Secure Bootloader v2.08
    Onboard Main Nokia Application v1.03
    Onboard Security Card Revision v1.09
    Nokia Connectivity Cable Drivers v7.1.8.0
    BB5 USB/FPIF Single Line/FPIF DualLine v20090315 (Mixed)
    DCT4 FPIF Single Line/USB v20090315 (v7.4.77.0)
    DCT4 Unlock Patches v20090502
    Communication Stack SSLv3-keys-06092008
    Skin Stack v6.30

  3. #3
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    Cyclone Update Beta test
    here is beta version, you can use it to unlock 5800, n96, e75, ini/vpl parser,etc:
    http://www.cyclonebox.com/downloads/Cyclone7828NCK.rar
    Official rls will come shorlty after this.
    Don't forget to upgrade your box fw before use to v1.0.5

  4. #4
    GSM Master josip luic's Avatar
    Clan br.
    4814
    Registrovan
    Apr 2007
    Lokacija
    karlovac
    Godina
    46
    Br. postova
    677
    Hvala
    4
    Pohvaljen 8 puta u 7 postova
    Cyclone Box Bulk Update Released

    --------------------------------------------------------------------------------

    New Bulk Update for Cyclone Box is ready, this includes:

    1. New Cyclone Box Firmware v1.06 is avaiable on our server, upgrade it through Box Maintenance

    - BB5 Booting for 5800,N97,5220 and others fixed
    - Fixed problem when box has been hanging up during BB5 boot
    procedure.
    - Meaning of "Repower on boot" button has been inverted. That means,
    BB5 phones are now by default repowered during boot (more stability
    while dealing with dead / stucked / unbootable phones).
    - Fixed box stability during 1208 flash and CP extract, no more
    "Failed to set Flashbus baud"
    - General Improved FBUS Stack stability
    - Code revised
    - Small speed improvment during BB5 TX2 Flashing
    - Minor changes/bugfixes

    2. Support for new DCT4Plus phones unlock/relock/autolock:

    RM-305 1650 v5.91
    RH-105 1208 v5.91
    RH-105 1209 v5.91
    RM-298 2630 v7.60
    RM-299 2630b v7.60
    RM-258 2760 v7.60
    RM-258 2760b v7.60
    RH-64 1600 v6.46
    RH-92 1100ib v6.46
    RH-93 1100i v6.46
    RM-291 v06.81 (missing partial)

    5. New DCT4 Loaders v7.49.00 introduced, this adds support for new flash chips.

    6. Added new DCT4 UEM CBUS Loaders - ASIC11 UEM IMEI Read problems fixed.

    7. New BB5 Loaders introduced, adds support for new flash chips. Note that greatly speed improvment was noticed during flash RAP3v3 phones with "slow" samsung flash chip - 00ec2208 - this includes 5200,5310,etc.

    8. Old updates also included in this bulkupdater, this includes BB5 RAPIDO NCK Calculator, and DCT4Plus Unlock patches released before (after installer):

    RM-392 2680 v6.17
    RM-393 2680b v6.17
    RM-392 2680 v5.28
    RM-393 2680 v5.28
    RM-362 5000d v6.31
    RM-363 5000db v6.31

    Download bulkupdater from : http://rapidshare.com/files/26579434...te10082009.exe
    Size - 15MBytes
    (trafficshare download, you don't need have rapidshare account to download updater).
    Run it and click INSTALL, all patches will be applied automaticlly.

    Best Regards,
    CT,
    Stay tuned.

  5. #5
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    13-08-2009 Next Bulk Update, RAPU-YAMA supported for FBUS Flash

    Quote:
    - Introduced support for FBUS Flashing RAPU YAMA phones (5630, 6700, 6303)
    - GUI Stability improved ; updated Skins Stack
    - Fixed Algoboot for BB5 phones in some configurations
    - SingleLine BB5 Flashing Speed improved (upgraded to 5.5mbits from 4mbits)
    - BB5 Multi-CRT Write bug fixed (mismatched certs when writing more than 1 certs at one time)
    - Improved Phone LOCAL/TEST Mode Entry algorithms during unlock and FBUS operatinos
    - Access Violation in some configurations, when changing BB5 Vpl / Dct4 Vpl Variant/Product - fixed
    - "Set factory defaults - BB5" are now default unticked after flash (useless in case of BB5 phones)
    - Repower on boot inverted ; accoring to firmware v1.0.5 , BB5 Phones are now default re-powered on boot
    - By default - USE DEFAULT PROFILE while unlocking DCT4Plus is unticked
    - DCT4Plus unlock routines rewritten - patch file is now applied before unlocking
    - Fixed problems upon unlocking some units of DCT4(plus) phones, when Initial SP Area is corrupted
    - When SIMLOCK IS NOT ACCEPTED during BB5 RPL Write, software trying to write FBUS part again after FLASHBUS part, so if NPC is corrupted, the SL will be restored anyway
    - Please don't use "Erase Security" function when writing BB5 PA_SL2 RPL, because SIMLOCK will not be accepted in such case! In order of simlock rebuild, NPC MUST BE CORRECT!
    - Improved BB5 RPL Write, when HWC can't be written (N96 - example), other certs being written and whole procedure is not being skipped
    - After sending Simlock and Superdongle data, delay added, so PA_SL can recalculate SP and Recreate 308 if needed (previously it wasn't working all times)
    - During BB5 Configuration Parse (flash chips, status), now RAM chip is displayed instead of UNKNOWN
    - DCT4Plus Security Status is now being displayed upon unlock - either TAMPERED or NOT TAMPERED
    - When DCT4Plus Security is NOT TAMPERED, Cyclone automatically makes Security Backup
    - When user trying to unlock phone which have protected PM308 Security Block against modification, and there is message "Failed to write Security Block" software is now automaticlly writing back NPC backup - IMEI
    - Erase Security while writing RPL is now by default disabled
    - SX4 Bypass during PA_SL2 unlock is now by default disabled
    - IMEI 1234567890, and "" is not valid integer bug fixed
    - Cyclone Box HW Rev A113 support added
    - Cyclone Box HW Rev A114 support added
    - Cyclone Box HW Rev A115 support added

    Note on flashing RAPU units:

    make sure you obtained CORRECT FBUS CABLE! UFC No.2 (As we tested) NOT working with RAPU phones, because MBUS line is duplicated. We recommend to use GPG FBUS cables, as we done our tests using their cables.

    This is BULK UPDATE, that means you need to download EXE file and click INSTALL. All previously released updates (few days before, rapido nck calc, etc) will be applied automaticlly, loaders will be purged too.
    You need have only installed installer (this one released in May, avaiable in http://www.cyclonebox.com/downloads/...xInstaller.exe

    Download new update from: http://rapidshare.com/files/26700287...te13082009.exe

    Best Regards,
    Cyclone Team,
    Stay tuned

  6. #6
    Balkan GSM Team darkskir's Avatar
    Clan br.
    575
    Registrovan
    Dec 2005
    Lokacija
    T.M.
    Br. postova
    751
    Hvala
    187
    Pohvaljen 373 puta u 172 postova

  7. #7
    GSM Expert tzlatko's Avatar
    Clan br.
    381
    Registrovan
    Nov 2005
    Lokacija
    TETOVO, MAKEDONIJA
    Godina
    64
    Br. postova
    1.119
    Hvala
    43
    Pohvaljen 68 puta u 46 postova

    11-09-2009 Cyclone HOT - Asic 3168 - 7100,2323,2330,2720 -FREE UNLOCKING Ready!

    Bulk update 11-09-2009 for Cyclone Box is READY.

    Added support for unlock/relock/autolock of DCT4+ Asic 3168 phones, supported models/versions for now:

    7100s RM-438 v5.22
    7100s RM-438 v5.41
    7100s RM-438 v6.31
    2330c RM-512 v6.46
    2330c RM-512 v6.75
    2323c RM-543 v8.20
    2323c RM-543 v6.75
    2323c RM-543 v6.46
    2630 RM-298 v57.20
    2720 RM-519 v8.20

    Not supported model/version of ASIC3168 phone here? Send us MCU File and we will update it !

    Unlocking is FREE.
    It is FIRST standalone solution (without usage of internet).
    Before usage it is very important to UPGRADE YOUR BOX FIRMWARE (to version 1.07).

    However, we added new service called "Super DCT4" inside a box.
    To unlock ASIC 3168 phones, your box needs be "Super DCT4" activated (this will also let you change DCT4/plus IMEI in future).
    The activations is done automaticlly in "Credits" tab and cost 50 credits - keep note that with box, comes 100 credits that mean if you haven't spend all logs on DCT4 RPLs, activation is FREE.

    Download link: http://rapidshare.com/files/27837846...te11092009.exe
    Ili odavde:
    Direct Download link : http://www.cyclonebox.com/downloads/...te11092009.exe

  8. #8
    GSM Master josip luic's Avatar
    Clan br.
    4814
    Registrovan
    Apr 2007
    Lokacija
    karlovac
    Godina
    46
    Br. postova
    677
    Hvala
    4
    Pohvaljen 8 puta u 7 postova

  9. #9
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    26-10-2009 Cyclone Update Strikes Again !!!
    Tropical Cyclone Strikes Again !

    !!! MAKE SURE YOU UPDATE YOUR BOX FIRMWARE BEFORE USE OF NEW PARTIALS ; OTHERWISE IT WILL FAIL TO SEND SUPER DCT4 EMULATOR !!

    Added support for new ASIC 3168 phones/versions, for now Cyclone supports following phones:

    RH-86 2610 v07.04a
    RH-87 2610b v07.04a
    RM-258 2760 v06.82
    RM-258 2760 v07.60
    RM-259 2760b v06.82
    RM-259 2760b v07.60
    RM-298 2630 v07.60
    RM-298 2630 v57.20
    RM-299 2630b v07.60
    RM-299 2630b v57.20
    RM-340 2600c v06.82
    RM-340 2600c v07.60
    RM-341 2600c-b v06.82
    RM-341 2600c-b v07.60
    RM-391 2760h v05.45
    RM-392 2680s v06.17
    RM-392 2680s v56.17
    RM-393 2680s-b v06.17
    RM-393 2680s-b v56.17
    RM-394 1680c v06.82
    RM-394 1680c v07.60
    RM-395 1680c-b v06.82
    RM-395 1680c-b v07.60
    RM-438 7100s v05.22
    RM-438 7100s v05.41
    RM-438 7100s v06.31
    RM-438 7100s v06.32
    RM-439 7100s-b v05.22
    RM-439 7100s-b v05.41
    RM-439 7100s-b v06.31
    RM-439 7100s-b v06.32
    RM-512 2330c v06.46
    RM-512 2330c v06.75
    RM-512 2330c v08.20
    RM-513 2330c-b v06.46
    RM-513 2330c-b v06.75
    RM-513 2330c-b v08.20
    RM-514 2320c v06.75
    RM-514 2320c v08.20
    RM-515 2320c-b v06.75
    RM-515 2320c-b v08.20
    RM-519 2720f v08.20
    RM-520 2720f-b v08.20
    RM-543 2323c v06.75
    RM-543 2323c v08.20
    RM-544 2323c-b v06.75
    RM-544 2323c-b v08.20

    Download updater from : http://rapidshare.com/files/29812993...te26102009.exe


    !!! MAKE SURE YOU UPDATE YOUR BOX FIRMWARE BEFORE USE OF NEW PARTIALS ; OTHERWISE IT WILL FAIL TO SEND SUPER DCT4 EMULATOR !!

  10. #10
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    28-10-2009 New Cyclonebox firmware Released
    Hello.
    New Cyclonebox Nokia firmware was uploaded to our server.

    Signature: Cyclone Nokia Application v1.09, (Oct 28 2009 15:56:27, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags

    Upgrade your box as usual using Box Maintenance functions.
    To enter box bootloader mode which allows firmware rewriting, re-plug it from USB socket.
    Fixed problem when box failed to start sometimes after upgrade (Box is not in needed mode), and other little fixes too.
    To all users who had non-starting box since last upgrade (especially HW A110/A111 owners), please upgrade it with current firmware and post results.

    Each box have now 2 SecurityArea upgrade credits, and 3 MainFirmware upgrade credits. Should be enough in case of problems. For more contact me, Siroya or Honey.

    Best Regards,
    Cyclone Team

  11. #11
    GSM Expert tzlatko's Avatar
    Clan br.
    381
    Registrovan
    Nov 2005
    Lokacija
    TETOVO, MAKEDONIJA
    Godina
    64
    Br. postova
    1.119
    Hvala
    43
    Pohvaljen 68 puta u 46 postova

    06-11-2009 New Cyclonebox Firmware Released

    Svi oni koji su imali problem sa zadnjim update-om, mogu ovim da poprave dizanjem na verziju v01.0A:
    New Cyclonebox Nokia firmware is uploaded to our server.

    Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application


    Upgrade your box as usual using Box Maintenance functions.
    To enter box bootloader mode which allows firmware rewriting, re-plug it from USB socket.
    Completly Fixed problem when box failed to start sometimes after upgrade (Box is not in needed mode), and other little fixes too.
    To all users who had non-starting box since last upgrade (especially HW A110/A111 owners), please upgrade it with current firmware and post results.

  12. #12
    Balkan GSM Team darkskir's Avatar
    Clan br.
    575
    Registrovan
    Dec 2005
    Lokacija
    T.M.
    Br. postova
    751
    Hvala
    187
    Pohvaljen 373 puta u 172 postova
    Also Added LED-progress upon Main Firmware Boot ; this will help to diagnose bootup problems in future; meanings of LED blinking upon startup below
    - Code Optimizations
    - RTOS Code Updated to 6.0.0
    - GCC Compiler Updated to 4.3.2
    - Device Framework Updated to 1.5.0
    - Little Bugfixes

    Firmware 01.0A LEDs Meaning upon Main Firmware startup
    GREEN, BLUE, RED, ORANGE Firmware Starting - Initializing Interrupts and PLL Clocks (at this stage check 12MHZ Crystals)
    GREEN, RED, ORANGE Initializing HW Modules, RTC (at this stage check RTC Clock)
    RED, ORANGE Doing Security Checkup (Should not hang here)
    ORANGE Initializing USB Stack (Check crystals, USB Cable Length, etc)
    NO LEDS Firmware Booted

  13. #13
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    *** Cyclone Box Firmware v01.0C Avaiable ***
    Signature:

    Cyclone Nokia Application v01.0C, (Nov 25 2009 03:18:28, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application


    Changelog:
    - SmartCard reset procedure rewritten from scratch, SC Reset takes now 20-30ms instead 0.5 - 1s
    - Baud autonegotiation for SmartCards added using FI/DI ATR Parameters, this results faster card transactions, etc.
    - Clock speed negotiation added for some cards (up to 20MHz)
    - Added support for protocol autonegotiation (T=0, T=1), for some cards
    - Added support for D5xxxxxx and D6xxxxxx series Cyclone Cards (TPDU problem)
    - More debug messages while dealing with Smartcard added
    - Minor changes and bugfixes


    If your box working ok, and you aren't encountering SmartCard problem(s), update is not necessary.

  14. #14
    GSM Master josip luic's Avatar
    Clan br.
    4814
    Registrovan
    Apr 2007
    Lokacija
    karlovac
    Godina
    46
    Br. postova
    677
    Hvala
    4
    Pohvaljen 8 puta u 7 postova

    Cyclone Shot, "HASH 9DD" Unlock

    ** Cyclone Shot, "HASH 9DD" Unlock, V30/V300 unlock, Simlock rebuild and more... **

    --------------------------------------------------------------------------------

    Hi,
    First of all, happy new year to all of our customers.
    New Cyclone Installer v1.03 is ready (final installer, no bulk updates needed).

    =====================
    Installer v1.03
    02.01.2010
    =====================
    - Added new BB5 Unlock,Relock,Autolock,Repair Method by RPL Generation, this uses server and consumes 10 logs whilst your credits amount must be > 100.
    - Supported are ALL PA_SL2 Phones, both RAPv3 and RAPIDO, with following hashes:

    9A28E119033B91D14D22838C86D0D53C
    9DDBFCFE6E73CED7D8C6268C8EB85723
    38F312750F686F9FC9B1B3778774A195
    BAF3A9C3DBFA8454937DB77F2B8852B1
    CAEEBB65D3C48E6DC73B49DC5063A2EE
    F2D76DFAFD66C7F195F278417DF05888
    F682624FFB08F6D955DBE7D9C0485084
    FCB5C510AF7F09F313D9BDE85A707CC0

    - Before unlock software will ask you (when possible) if you want RPL calculation. If you don't need unlocking by RPL, simply click NO and old free unlocking methods will be used (PM308+120 recalc, Secure RAM dump and NCK calc on RAPIDO PA_SL2 phones, etc). However there are some phones which might be unlocked only using new method (9DDB - 3600,5220,7310, or new 5800 >v.30, new N96, etc)
    - After unlock, requested RPL file will be saved to STORED FILES dir, it might be used later after phone chip erase, etc - as a generic backup
    - To Autolock/Relock use "Import SL5" function and point to SL5 array file in "UnlockData" dir, with SW comes few generated files
    - If you need SL5 file for your network, use "Create SL5" button and enter MCC-MNC, SL5 file will be generated for you and your phone might be relocked
    - SL Area might be repaired using UNLOCK button for SL2 phones
    - RPL Write bugs fixed ("simlock not accepted" after few tries)
    - Path "/" problem fixed
    - Memory manager updated to v4.94
    - New skin manager introduced (6.53) - removed flash files selection bugs
    - GUI redesigned a bit
    - Nokia Connectivity Cable Driver updated to v7.1.22
    - 2760h RM-391 v06.83 Unlock / Relock added
    - 2330c RM-512 v09.55 Unlock / Relock added
    - 2330c-b RM-513 v09.55 Unlock / Relock added
    - 2720f RM-519 v08.42 Unlock / Relock added
    - 2720f-b RM-519 v08.42 Unlock / Relock added
    - 2720f RM-519 v09.55 Unlock / Relock added
    - 2720f-b RM-519 v09.55 Unlock / Relock added
    - SX4 Bypass during BB5 Unlock removed, is no needed anymore
    - Fixed USB stack hanging up on some Windows configuration due to invalid hexcodes in BoardCode Revision USB Field
    - After Super DCT4 Activation in Credits tab box Security Page is automaticlly upgraded, no need doing it manually
    - New firmware v01.15 introduced - box can switch itself from MAIN mode to BOOT mode (no USB reconnect needed anymore)
    - 6220c,3600s booting fixed in new firmware
    - New Secure bootloader v02.10 introduced
    - New bootloader supports more types of smartcards (autobaud, PTS protocol negotiation, etc)
    - Secure BootAgent v1.00 introduced in new firmware
    - Firmware RTOS Code Updated to v6.0.1
    - Slightly code optimizations and stability improvments in new firmware
    - Secure Bootloader upgrade introduced after box maintenance
    - Added support for Cyclone box HW REV A116, A117, A118, A119, A11A, A11B, A11C

  15. #15
    GSM Master josip luic's Avatar
    Clan br.
    4814
    Registrovan
    Apr 2007
    Lokacija
    karlovac
    Godina
    46
    Br. postova
    677
    Hvala
    4
    Pohvaljen 8 puta u 7 postova
    05/01/2010 CycloneBox Hotfix Released

    --------------------------------------------------------------------------------

    -Fixed Unlock bug for old BB5 phones


    Copy the new exe in X:\programfiles\Cyclonebox\

    Download Link
    http://www.4shared.com/get/188956154...55C60D75.dc115

  16. #16
    GSM Expert tzlatko's Avatar
    Clan br.
    381
    Registrovan
    Nov 2005
    Lokacija
    TETOVO, MAKEDONIJA
    Godina
    64
    Br. postova
    1.119
    Hvala
    43
    Pohvaljen 68 puta u 46 postova
    06/01/2010 CycloneBox STABLE Installer v1.04 Released

    --------------------------------------------------------------------------------

    =====================
    Installer v1.04
    06.01.2010
    =====================
    - Included latest critical hotfix for old BB5 unlocking methods when phone after unlock was still locked, update is highly RECOMMENDED!

    http://rs10.rapidshare.com/files/330...xInstaller.exe

  17. #17
    GSM Master josip luic's Avatar
    Clan br.
    4814
    Registrovan
    Apr 2007
    Lokacija
    karlovac
    Godina
    46
    Br. postova
    677
    Hvala
    4
    Pohvaljen 8 puta u 7 postova
    CYCLONE BOX - FREE (NO CREDITS) SL2 RPL CALC (inc 9ddb) FOR UNLOCK/RELOCK/REPAIR

    --------------------------------------------------------------------------------

    Hi to all

    Starting from now all calculated SL2 RPLs using Cyclone Server are FREE.
    One condition you need to met, you need have 101 credits on your account.

    Stay tuned for some NCK-thing

    Best Regards,
    Cyclone Team.

  18. #18
    GSM Master josip luic's Avatar
    Clan br.
    4814
    Registrovan
    Apr 2007
    Lokacija
    karlovac
    Godina
    46
    Br. postova
    677
    Hvala
    4
    Pohvaljen 8 puta u 7 postova
    24-01-2010 CYCLONE SHOT SLEEPING SHOT! First STANDALONE BB5 NCK Calculator Released!

    --------------------------------------------------------------------------------

    Hi,

    - Added STANDALONE, FREE (NO LOGS, NO INTERNET!!!) NCK Reader (levels.. pw1..7) for ALL BB5 RAPv3 and RAPIDO phones (including 9ddb new hash, together PA_SL1 and PA_SL2 phones)
    - Unlocking Method is now being selected before unlock
    - Added BB5 RPL Calc for PA_SL1 phones (using server) for Simlock Repair
    - Few changes with BB5 booting, minor bugfixes, cosmetic changes, etc

    !! FIRMWARE UPGRADE IS MANDATORY IN ORDER TO USE THIS UPGRADE !!

    KEEP IN MIND STILL SOME PHONES (I.E. TELCELL MEXICO) CAN'T BE UNLOCKED USING NCK, THIS CASE USE FREE RPLS.

    Avaiable Unlock Methods Now:


    Quote:
    PM308 Recalculation (Standalone, Free)
    NCK Calculation (Standalone, Free, New Method)
    NCK Calculation (Standalone, Free, Old Method) Remark: Works only on SL2 Rapido Phones, SW < v30
    RPL Calculation (Server Based, Need Credits)

    (need select needed unlock method before unlock)

  19. #19
    GSM Master dr.Pava's Avatar
    Clan br.
    271
    Registrovan
    Oct 2005
    Lokacija
    obrenovac
    Godina
    44
    Br. postova
    634
    Hvala
    39
    Pohvaljen 70 puta u 50 postova
    Cyclone BOMB ! Standalone : SX4 Emulation, SD Repair, RPL Calc, BB5 NCK Calc, more!!!

    --------------------------------------------------------------------------------

    Hello,
    New version of Cyclone Box Software is ready. There is a lot of changes, here is some of them:


    Quote:
    - WORLD'S UNIQUE : Standalone Superdongle Key Calculator Added! No internet, no logs, no time! Calculation time - 0.003 sec ! Works for any SL1, SL2 and SL3.

    - WORLD'S UNIQUE : Standalone Unlocking/Relocking using RPL Added! No internet, no logs, no time! Calculation time - 0.002 sec ! Works for any SL1 and SL2.

    - WORLD'S UNIQUE : Standalone SX4 Authorization Added! Box is now emulating Nokia SX4 card - no need internet, no need logs to authorize ANY Nokia Phone, just box! Works for any SL1, SL2 or SL3. Emulated SX4 works with ORIGINAL NOKIA Superdongle keys (no need rebuild SD), Custom keys (made by Cyclone,MT,UB), etc. In case of Authorization fail, it will automaticly write and authorize using Custom Keys. Authoirzation time - 0.004 sec ! Supported are RAP and RAPIDO mcu, in case of RAPU phones SX4 Remote Card will be used. After authorization with Cyclone, PHONE STILL CAN be Authorized with ORIGINAL SX4 Card!

    - WORLD'S UNIQUE - Cyclone can now authorize Barred Phones (with Correct superdongle keys, but with higher KeyIndex ever used than 0 (possible KeyIndex 0..7), SX4 card can use any higher keyindex at time, when higher key is used, lower keys are automaticly not used in future, and phone requires to use higher key index) - UB and other custom boxes can't do it as long SX4 emulation is not 100% Nokia-Like

    - WORLD'S UNIQUE : Starting from now, Cyclone Box have ability to make _FULL RPL BACKUP_ of BB5 phones! Current existing SW on market creating only some part of RPL (NPC,HWC,Simlock) - Cyclone is now backing up missing part:

    - Added SUPER DONGLE KEY extracting (this Original Nokia one, so after writing it back phone still can be authorized with original SX4 card)

    - Added CMLA KEY DATA extracting (That means created RPL File by Cyclone is now 100% SAME AS NOKIA'S ONE!)

    - WORLD'S UNIQUE : Added BB5 MCU & DSP Timestamps Reader / Diagnostic Tool. This will help diagnostic of downgraded phone, will read Security Block, decode timestamps of current installed SW (and factory one, or Dejan Hack if exists) with FLASH installed MCU/DSP timestamps. Will have ability to FULL REBUILD downgrade security zone (dead06) soon.

    - WORLD'S UNIQUE : BB5 Security Block Analyzer added, this will read Security Block and analyze it's health for content of following Security Data: SIMLOCK DATA, SUPERDONGLE KEY DATA, ECC KEYS DATA, DIV DATA, CMLA (DRM) DATA. Also it reads ST_SIMLOCK_TEST and ST_SECURITY_TEST and when problems occur, recommends actions.

    - WORLD'S UNIQUE : Standalone BB5 Calculator Added. This calculated BB5 NCK (levels 1-7) for unlocking purposes. Calculated codes works only with phones which have been relocked with Cyclone Box. To calculate code is needed only IMEI - no need cable, phone, flashbus logger, etc.

    - WORLD'S UNIQUE : BB5 Unlock by NCk/RPL, SD Recalc, SX4 auth using USB !! (once log file readen)

    - Upon box upgrade (maintenance) Bootloader in box is syncronized with server to avoid Activation Problems
    - Bootagent server upgraded to 1.01, fixed "Box is not activated, ID 09)
    - Fixed "Access Violation" when Cyclone Box SW is already launched and connection to box opened
    - After BB5 Relock, unlock codes is displayed
    - More detailed messages is now shown upon new NCK or RPL calculation
    - BB5 Security Code Reading is moved to "UserArea" tab (needed space for MCU/DSP timestamp reading and security block analyzing)
    - Total unlock/relock time added after operation is finished (thx to arash)
    - Box Firmware version is now checked upon loading of Nokia Module - if box firmware is obsolete, SW asks for upgrade and doing it automaticly
    - Selected unlock method is now displayed before RootkeyHash support check
    - Upon first reading of NCK Code (Extracting) or RPL Calculation, "CYC" log file is stored in "StoredFiles" and next time upon BB5 Security Actions (Calculation of SD, Extracting NCK, Calculating RPL (Relocking)) phone is no booted anymore and whole process took only 1 second!! Keep in mind calculated CYC file is paired with Box Serial number, so in case if your box serial number is changed-go to stored files and purge all "cyc" files.
    - Decrypted AES Subblock of Security Block is now checksum checked (16 bytes checksum at end of block)
    - Fixed "This is invalid integer..." when parsing phone with damaged IMEI
    - When another copy of Cyclone Software is running, message is displayed instead of errors
    - New method of NCK Calculation is now default BB5 unlocking method
    - When New Method of NCK calculation is selected, PA_SL is not determined already (saves lots of time)
    - Skin Manager updated to v6.54 (more stability)
    - When BB5 RPL Don't contain Certificates (NPC,HWC) phone isn't booted
    - Fixed bug when Flash RPL BB5 Data is being written two times
    - Added more verbose debug messages when preparing Boot BB5 Phone
    - Garbage characters when dealing with SLPA phones (#pw+___garbage___+1) bug fixed
    - New splash screen added, thx to arash, again
    - When Cyclone fails to boot APE subsystem, it shows hint about TX2
    - APE subsystem is now no longer booted upon CheckFlashingBus
    - Changed "Failed to write CMT Cert Data (3)" message, added TX2 information
    - BB5 TX2 Line test added after "CheckFlashingBus"
    - Before RPL Write, Software testing TX2 Line and when its faulty (not adapter) it showing apporiate message
    - Writing BB5 CMT HWC Certificate from RPL fixed (thx to arash)
    - Parsing some Simlock Arrays (5130) produced garbage output - fixed (thx to arash again)
    - Added support for Cyclone Box HW Rev A11D

    Just download EXE file and replace at C:\Program files\Cyclone Box\
    Make sure Installer is installed aswell (this one from january, else you will have message RootkeyHash not supported).

    You don't need any activations,logs to use this update.

    Notes:
    SX4 Emulation works offline and emulates SX4 card 1:1, in case of failure still server will be used.

    BB5 NCK Calculator works for phone relocked by Cyclone Only (unlocking using IMEI only, no need know other data, just imei - no need cable or connection to box too).

    BB5 USB Unlocking and other security tools works only if phone log (by flashbus) is readen before.

    Update is fast and most of security functions (sd,rpl) works very fast.

    Don't forget to upgrade your Box Firmware to v01.21.

  20. #20
    GSM Master YuMERA's Avatar
    Clan br.
    511
    Registrovan
    Dec 2005
    Lokacija
    Šid, Srbija
    Godina
    55
    Br. postova
    348
    Hvala
    67
    Pohvaljen 163 puta u 63 postova
    Evo ga prvi update DCT4+ free....


    Cyclone Free DCT4 RSA Unlock Ready, beta tests here
    Hello,
    you can download latest beta from here:

    http://rapidshare.com/files/37661736...BB5NewProt.rar

    (please use it only for test DCT4 RSA purposes, full stable installer will be released tonight hopefully.).

    Don't forget to upgrade box firmware!

    Post unlocked phones here.

    Best Regards
    Cyclone Team

  21. #21
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    CycloneBeta_DCT4RSA_BB5NewProt realased

    CycloneBox Present Free DCT4+ Unlock including RSA protected phones

    --------------------------------------------------------------------------------

    Hello,you can download latest beta from here:

    http://rapidshare.com/files/37661736...BB5NewProt.rar




    all DCT4+ phones are supported including 1661 , 1662 , 1208, 5030 etc


    Please use it only for test DCT4 RSA purposes,

    full stable installer will be released tonight or tomorrow with some other great and unique features.

    Don't forget to upgrade box firmware!

    Post unlocked phones log in above

    http://forum.gsmhosting.com/vbb/f528...s-here-978908/


    Best Regards
    Cyclone Team

  22. #22
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box Firmware v01.36 Released

    --------------------------------------------------------------------------------

    - Fixed smartcard issues in some enivronments (Smartcard is not responding for reset)
    - Fixed issues when some phones couldn't calculate NCK Codes with new method (Security Section Checksum Error)
    - Minor changes and bugfixes

    !! CYCLONE - STOP ME IF YOU CAN !!

  23. #23
    Balkan GSM Team Rem@x's Avatar
    Clan br.
    58
    Registrovan
    Sep 2005
    Lokacija
    Tuzla,B & H
    Godina
    42
    Br. postova
    868
    Hvala
    14
    Pohvaljen 73 puta u 53 postova
    Cyclone MAJOR Update - New FBUS Protocol (X3,X6) - DCT4RSA(1661,5030) - COM Emulator
    Hello, New Cyclone Box Installer is READY.

    What's new?

    =====================
    Installer v1.05
    23.04.2010
    =====================
    - Added support for NEW Nokia BB5 FBUS CMT Loaders (flashing new phones - E52 ST Chip, X3, X6, 5530, etc, etc), supported RAPU,RAPIDO,RAPv4 phones,etc. You can flash your phone using New Protocol, but also manage Reading/Writing Certificates,etc.
    - Added support for BB5 FBUS New Protocol APE Loaders
    - Added support for Unlock / Relock / Autolock DCT4 RSA Based phones (1661, 5030, 1202, and generally ALL ASIC 11 phones), without patch. Solution is standalone and to unlock one phone takes no longer than 2 seconds.
    - Added CS Repair due to Bad Simlock in ASIC11 phones (no patch)
    - Latest Nokia Loaders 2010 Introduced (including upgraded RAPv3 old prot algo 9.50)
    - Added SD Repair, RPL Calc, etc for RAP3v2 phones (hash E9EFF4BFAA5393217CA6B17755FC3E14)
    - Added SIMLOCK BACKUP for SL3 phones (can be restored even after fullerase)
    - Added support for NCK Reading, SD Extracting, and more accurate Securtity Analysis for v30.xx phones (N96,5800,etc - so called by "mx" team "sl3" but in fact is simple sl2), previous versions gave msg about "Decryption fails"
    - Added COM Emulator - now Cyclone Box can work as UNI BOX with UFS Pinout !
    - Added one-click analyze / repair of Dynamic Camera Configuration (blank screen, "camera not ready",etc) based phones (DCT4plus, 5310, 7210, 5220, 6700, others) supported Camera Drivers:

    GR0103D101260C206C02
    GR0103D101260C213402
    GR0103D10126095A1F05
    GR0103D10126095A1F07
    GR0103D10126095A1F87
    GR0103D1012601022C00
    GR0103D1012601022E05
    GR09733814140C206C02
    GR0973381414095A1F05
    GR0973381414095A1F07
    GR0973381414095A1F87
    GR097338141401022C00
    ISL2TI020000093E2F30
    NI00IIIIRR030C20C607
    NI00IIIIRR03095B1F00
    NI00IIIIRR03095B1F01
    NI00IIIIRR030102F200
    NI00IIIIRR030102F201
    NI00IIIIRR030102F202
    NI00IIIIRR030102F203
    NI00IIIIRR0301035420
    NIMMIIIIRRFF0A021001
    NIMMIIIIRRFF094B2F01
    NIMMIIIIRRFF06150018
    NIMMIIIIRRFF06150110
    ST090404003C06150018
    ST090404004C06150018

    - Added TX2 warning when certificate is being not accepted (common problem while writing RPL)
    - Updated Nokia USB Connectivity Drivers to 7.1.22.0
    - Upon installation, StoredFiles permission is now set to full to avoid Permission problems (and software is still safe for trojans/etc)
    - Folder "StoredFiles" is no longer marked to Delete upon Uninstallation to keep old backup files
    - Rewritten BB5 RPL Backup routine, now Certificates are being backed-up first, so even if phone is DEAD, still certs will be backed-up
    - Factory defaults after flash are now defaultly ticket (BB5,DCT4)
    - Mode transition manager added in firmware v01.37
    - Software accept Mode Transision to "Normal" when phone goes to "Power Off"
    - Flash Variants are displayed now in descending order
    - SL Array readen now upon RPL Backup is Keyb/FBUS Count masked
    - Now, all 7 codes are being sent to phone (some phones don't accept +7 codes - tested on N71)
    - Fixed NCK Calculation for some mobiles (Security Section Checksum Error)
    - When software detects HWC/CCC/Variant certs mismatch, it tries to write local one from database
    - Fixed smartcard not responding for reset in some configurations
    - Fixed "Failed to Read SP Info" on older RAPv2 phones
    - Path manager - bug "/" fixed
    - Fixed problems with StoredFiles managing when software have no enough permissions (occurs on WinVista / Win7)
    - SX4 Bypass is removed now (no need anymore)
    - Improved sending CMT Secondary Loader
    - Fixed TX2 test crash when phone is completly erased (TOC erased)
    - Added automatic PM upload with field 1,309 after SX4 Authorization (one-click ST_SECURITY_FIX !), Supported 100+ BB5 phones in local database
    - Improved Security Analysis, added HWC/CCC/Variant Certs Check
    - Box Firmware : 01.0C, Access Violation Fixed
    - Runtime Error when "Disable Skins" enabled fixed
    - Taksbar problems fixed
    - Fixed 1208 UEM Read/IMEI Rebuild
    - N73 booting improved (when backing up crt, writing rpl incorrect loaders was assumed before)
    - New Nokia Firmware introduced, improved stability a lot
    - DCT4Plus relock fixed
    - Mode transition improved
    - BB5 USB Flashing fixed
    - Factory Set problems fixed
    - Fixed problems when dealing with RAP3v2 Phones
    - Skin manager upgraded to v6.63
    - HW Platform is now being readen upon Box Initialization
    - Added support for CTF'2010 Platform
    - Flashbus writing speed increased about 10%
    - Flashbus FUR messages reading speed increased about 40%
    - BB5 Booting procedure rewritten, now no problems in phones like 5800,N97,5200,etc..
    - After flashing, added average writing speed display
    - BootAgent removed, now Bootloader upgrade is managed by middle-loader
    - Main Firmware rewritten from scratch, old bugs gone away.
    - MPU Added
    - Improved Oscillator startup time, box hangup fixed in some cases
    - Realtime clock not used anymore, too much hardware problems when box not started
    - Fixed booting dead BB5 mobiles
    - If bb5 booting fails, SW displays possible reason reported by new firmware
    - BB5 is being try to boot now without hardware VCC switch
    - Added USB Dualport transactions (increases speed)
    - Added old protocols support (tick "Use Old Protocols Loader")
    - Upon finding CMT/APE loaders, it shows a find parameters (TX2 line, Requested Protocol Type, etc)
    - BB5 flash_block_Data checksum fixed
    - Additional flash chip information is now shown upon BB5 Alg Boot (VPP Info, Chip Size)
    - Fixed boot when after activating DCT4 FTD phone comes to dead
    - Fixed "Failed to decode MSID" when flashing some PPM DCT4 files
    - UPP ID is now represented as hex upon Read Info
    - Added detection whether Pri/Sec camera exists or is configurable
    - Minor changes and bugfixes
    - Black Skin introduced
    - Fixed DCT4 Unlock not being executed after Flashing Procedure
    - Versions snap
    Installer v1.05
    Main x86 Application v1.0.0.9392
    x86 Memory Manager v4.92
    Native USB Drivers v1.0.0.4
    USB-COM Stack Drivers v1.0.0.0
    Onboard Secure Bootloader v2.10
    Onboard Main Nokia Application v01.37
    Onboard COM Emulation Code v1.00
    Onboard Security Card Revision v1.09
    Nokia Connectivity Cable Drivers v7.1.22.0
    BB5 USB/FPIF Single Line/FPIF DualLine v20100410
    DCT4 FPIF Single Line/USB v20100410
    DCT4 Unlock Patches DEPRECATED
    Communication Stack SSLv3-keys-06092008
    Skin Stack v6.63

    Thanks to all contributors which supporting us! Thanks Moulnisky, ptt, Honey... Thanks arash & others...
    http://rapidshare.com/files/37901485...xInstaller.exe

  24. #24
    GSM Master zokisabac's Avatar
    Clan br.
    2499
    Registrovan
    Oct 2006
    Lokacija
    www.royalmobil.rs
    Godina
    46
    Br. postova
    416
    Hvala
    137
    Pohvaljen 294 puta u 116 postova
    ** Cyclone fixed Installer v1.06 (DCT4) **
    !!! INSTALLER v1.06 !!!

    (fixed DCT4 and some other critical bugs)
    http://rs107.rapidshare.com/files/37...xInstaller.exe

  25. #25
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Ioioio! FREE Blackberry Logger/Calculator, FREE DCT4 RPL for Asics 2,5,6,7,11
    Hello, New update for Cyclone Box is Ready.

    What is new?
    - Blackberry Module added, support all latest 210 MEPs. Unlock is free, and uses server to calculate Unlock Codes.
    - If Logger fails somehow, you might still use manual mode (if you know IMEI and MEP)
    - All DCT4 RPLs are free now (Included ASICs: 2,5,6,7,11)
    - Skin changed back to white one (too many users complained)
    - Improved mode transition between Main/Boot (timeout increased)
    - Fixed problem when upon adding "New Path" in "Paths" module Root directory was empty
    - CBUS stack improved, if box is disconeected during work, it tries to connect it again instead of "CBUS ERROR"
    - Minor changes and bugfixes

    How it works?
    1. Run Blackberry Module
    2. Install drivers (skip this if done already)
    3. Click "Read Phone"
    4. Connect phone to computer
    5. Unlock using calculated codes

    Here is example BB8310 Unlocked by Cyclone:

    Quote:
    Waiting for new Blackberry USB Device (timeout 30 seconds)...
    New device attached, checking if it's Blackberry...
    Blackberry Found!
    PIN: 208B60F9
    Opened Channel "RIM CalTask", Proceeding...
    IMEI: 358516020462712
    HWV-16835-001-1
    ASY-15714-005
    MEP-06424-002
    VSM-17713-001
    CFG-10695-065
    SFI-15771-033
    APP-21301-001
    Calculating Codes using Fetched Data...
    Handling device: [Cyclone Team], [Cyclone Box]
    Service Tag: 6F1079DB8ADD083018BB1FB147B8DEE6
    Cyclone Server (1.0.0.598), Cyclone Box Team 2008, 2009, 2010 - Ready.

    Please wait...
    Codes received: 1
    MEP-2 Code: 4910403860764705
    All Done!

    Where to download?

    http://rapidshare.com/files/384772766/Cyclone.exe


    Please do not forget also to install Blackberry drivers!

    You can download latest drivers from here:
    http://rapidshare.com/files/38463108...M5.0.1b73_.msi

    !!! CYCLONE - STOP ME IF YOU CAN !!!

    Best Regards,
    Cyclone Team

  26. #26
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    08-06-2010

    Cyclone Box Firmware v01.38 Released

    --------------------------------------------------------------------------------

    v01.38 Nokia Firmware is uploaded to server

    Changes:
    - Fixed problem when Nokia correct BB5 NCKs was calculated only for levels +1,+2,+3, codes +4,+5,+6,+7 was wrongly calculated due to memory leak of calculation routines.
    - Minor (or non enveloped yet ) changes and bugfixes

    This is server-side update only, don't ask for "exe" file because new "exe" is not released at moment, just use Maintenance Tool and upgrade your box.

    Every box have 3 tries of upgrading firmware, please be patient during upgrade process because it may take some time and if you will cancel it (When software will act as a "hangup") you will lose upgrade logs and will need ask us for adding another credits...



    Best Regards,
    Cyclone Team

  27. #27
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    BOMBA BRE

    Cyclone EVOLUTION ! Added FREE Clip Mode, Added FREE Infineon XGold Flashing & More..

    --------------------------------------------------------------------------------

    Hi to all
    New Cyclone Box Installer, Firmware, Bootloader, is ready!
    Most important changes:

    =====================
    Installer v1.07
    30.06.2010
    =====================
    - New FBUS Loaders v10.18.00 introduced (new protocol, for RAPIDO,RAPU,ST,etc)
    - New FBUS Lodaers v10.16.00 introduced (old protocol, for RAPv3)
    - Added support for Infineon X-Gold phones flashing. Phones supported: 1661 RH-111, RH-125, etc.
    - XGold: Support for dead phones flashing
    - XGold: Support for cross flash (we have tested 1616 flashing with 1800 firmware and seems works. Anyway YOU are responsible for any damages. Make sure PM is being backed-up before cross-flash. You also can't flash phones with difrent platform (i.e. RH111 <> RH125). Too diffrent CPU, LCD...,etc...)
    - XGold: Supports bauds 115200,230400,460800,921600
    - XGold: You don't need to know which phone is UPP or Infineon based. Just select model and Cyclone will detect it automaticly - wil select corect falshing method.
    - XGold: Supports for changing phone PPM/CNT or/and MCU
    - XGold: Support for latest 2010 PBL/EBL Loaders
    - Added "Flash Language Only" checkbox for DCT4/XGold mobiles. Use only if MCU version installed in phone matches PPM/CNT version which going to be flashed.
    - Cyclone Clip Diagnostic module added. This is used for testing additional Cyclone Hardware (Clip).
    - Clip Module Added into Main Firmware. This is used only with "Cyclone Clip" hardware. Clip Features:
    - Clip: Can unlock any DCT4+ phone within 2 secs (without PC)
    - Clip: Can repair Contact Service (if caused by damaged simlock)
    - Clip: Can Rebuild Simlock Area
    - Clip: Can reset security code of most DCT4/BB5 phones
    - Clip: Can reset security code bad attempts counter of most DCT4/BB5 phones
    - Clip: 100% Safe, fast and easy to use
    - You need have Clip Hardware to use Clip Funcionality. Clip is very simple hardware attached together with batery to Diagnostic Port (and box could be used as clip without PC). We will update clip later for other funcionality.
    - New Secure Bootloader Agent v3.00 Released
    - Added Dead Boot Recovery mode (in case to do "Boot Recovery" (just in case) smartcard MUST be removed to launch Recovery Mode!)
    - New Secure Bootloader v2.12 have been released
    - Bootloader: Added Clip Detection
    - Bootloader: Fixed floating (blinking) "VBAT" port
    - Bootloader: Added support for some new types of smartcard
    - Bootloader: Improved startup time
    - Bootloader: Improved security
    - Bootloader: Minor changes and bugfixes
    - Added new messages to NCK Phone Respond parsing (added "Too fast between tries" and "Not locked on given locklevel")
    - The +4/5/6/7 BB5 NCK passwords are now calculated correctly (memory leak during code calculation)
    - Message "This will consume XX credits" removed while taking DCT4 RPL as long as they are free .
    - Blackberry IMEI Check fixed
    - Added "Skip CMT ID Check" for some BB5 phones (if you are trying to flash alien files or NMP made some mistake during building FIASCO images)
    - Added Warning confirmation before Writing Alien SD Keys
    - Error while RSA unlocking DCT4 phones fixed (Error 0x02). Error have occured when used bad cable.
    - Main Firmware v01.41 Released
    - Box HW Rev A11E Added
    - Minor changes and bugfixes

    How to run "Clip Mode"?
    1. Attach Clip Adapter to box "Diagnostic Port"
    2. Connect Clip Adapter "USB" cable to box USB Input
    3. Connect 9V battery to Clip Adapter
    4. Connect phone to "Service Port"

    How to use "Clip Mode"?
    Once Clip Mode is run, you need use S1 Button to change it's mode.
    Default clip mode is:
    RED (slowly blinking) - read phone info via FBUS
    other modes you can select pressing S1 button:
    GREEN - Unlock/Repair simlock
    BLUE - reset securitycode/sec.code attempts

    Once correct mode is assigned, you need push S2 button. Needed action will be taken, and GREEEN (success) or RED(failed) led will blink fast afterall. Clip will be ready to service next phone/select other mode/etc.

    Maybe some movie, how to use it?
    Youtube: YouTube - Cyclone Box used as Clip with latest addon

    Where to get clip hardware?
    You can ask any of Cyclone Box distributor/reseller.
    Hardware is relative cheap - 15 usd (end-user price).
    We will update clip soon with other functions.
    It's first official Cyclone Addon.
    Keep note it is CYCLONE ADDON, and same Clip Adaptor - it's just adaptor and still Cyclone Box is needed to work!

    Where from download?
    RapidShare: 1-CLICK Web hosting - Easy Filehosting

    Please don't forget to upgrade box using new EXE file. New firmware v01.41 is needed to run latest Application.

    Best Regards,
    Stay Tuned,
    Cyclone Team

  28. #28
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Box Firmware v01.42 Released



    Hi, new Cyclone Firmware is uploaded on server.

    - Fixed particular problems with handling new loaders (10.18.00),
    however if you still having problems with flashing phones using new protocol no need to make headache
    - we though about it and left old protocols untouched, so in case just make bugreport in our subsection
    and meanwhile you can flash your unit by ticking "Use Old Protocol Loaders".
    - Minor changes and bugfixes

    Every box have 3 update credits, please be patient during upgrade.
    No need to upgrade EXE - bug was inside box fimware, not in EXE, so just use Box Maintenance and upgrade box microcode.

    Best Regards,
    Cyclone Team

  29. #29
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova

    Cyclone Box Firmware v01.43 Released

    Cyclone Box

    Firmware v01.43 Released


    Hi, New firmware v01.43 is uploaded to server

    - Fixed "Smartcard is not responding for reset" in some configurations. Thanks TouTouGSM for reporting and helping in removing this problem. (http://forum.gsmhosting.com/vbb/6049337-post11.html)

    Please upgrade your box only if you are encountering Smartcard problems, else no upgrade is needed.

    Don't need to upgrade exe if you have installed latest installer (released on 01.07.2010), else install this installer to have backward Nokia Loaders compatibilty. To upgrade just go to "Box Maintenance" and use Maintenace to write latest microcode.

    As always,every box having 3 update credits. Please WAIT PATIENTLY during upgrade as it will end (else your box will not be upgraded, and credits will be charged, you will need to ask us agian, etc, etc - so just click BOX MAINTENANCE and patiently WAIT!).

    During upgrade you may see message like "Cant upgrade bootloader", "Not allowed to upgrade bootloader", "Bootloader upgrade skipped". THIS IS VERY NORMAL becuase BOOTLOADER SHOULD BE UPDATED ONLY ONCE to minimise risk of destroying your box. As you know bootloader is first code executed upon box bootup, so when its corrupt/destroyd box is bricked. So if your bootloader is already up to date you will receive such message, but that means everything is just fine.

    Another things which need attention is usage latest firmware and latest NK loaders.
    Keep note that firmwares >=v01.42 need have installed Nokia loaders 10.18.00 (latest installer update). Else you will encounter booting and flashing problems - firmware >=01.42 is not compatible with 0.9.50 loaders !!! So if you don't installed latest installer BUT upgraded Firmware to >=v01.42 YOU WILL ENCOUNTER NOKIA BB5 FLASHING PROBLEMS!

    Just sticky with this rules and enjoy Cyclone

    Best Regards,
    Cyclone Team

  30. #30
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova

    Cyclone NEVER SLEEP Installer v1.08 - New FBUS Loaders v10.20.1, Firmware v01.

    Angry Cyclone NEVER SLEEP Installer v1.08 - New FBUS Loaders v10.20.1, Firmware v01.45...
    Hi, that's is right time
    New Cyclone Installer,Firmware,Loaders are avaiable.

    What's new?
    =====================
    Installer v1.08
    06.07.2010
    =====================
    - Added new Nokia FBUS Loaders for Old and New protocols (v10.20.0)
    - Fixed problems with flashing RAPIDO based phones with hash 479.... (N86,X6). Was Nokia fault (10.18.0 loader pack was broken, probably problem with RSA signature so loader wasn't spawned at all...)
    - Fixed problem with FUR initialization when dealing with v10 (2010) Nokia Loaders (Affected was new protocol phones)
    - Forced users to install v1.08 changing few firmware routines - some users upgraded their boxes updating it for "v10" loaders, but they didn't installed new installer - their BB5 flashing was broken then. Forcing users to install v1.08 and upgrade box is just to ensure every user will have 100% working environment (latest loaders, latest firmware, latest exe).
    - New Box Firmware v1.45 Released
    - Handling some smartcards in main firmware fixed
    - Minor changes and bugfixes

    Where to download?
    RapidShare: 1-CLICK Web hosting - Easy Filehosting

    Don't forget to upgrade your box firmware to v01.45 !

    Best Regards,
    Stay Tuned,
    Cyclone Team

  31. #31
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Product Manager

    --------------------------------------------------------------------------------

    Hi!
    New update for Cyclone Box is Ready.

    What's new?


    Code:
    =====================
    Installer v1.09
    02.08.2010
    =====================
    - New BB5 Loaders v10.22.00 Introduced
    - SL3 Unlocking added, uses server and credits, supported models:

    - 2700 Classic (RM-561)
    - 2730 Classic (RM-57
    - 2730c-1b (RM-579)
    - 2690c (RM-635)
    - 3600 Slide (RM-352) v56.26 – v57.23
    - 3720 Classic (RM-51
    - 5130 XpressMusic (RM-495)
    - 5310 XpressMusic (RM-303) v58.58 – v59.42
    - 5730s (RM-465)
    - 6300 (RM-217) v57.20
    - 6303 Classic (RM-443)
    - 6500 Slide (RM-240) v59.60
    - 6500 Classic (RM-265) v59.45
    - N97 (RM-505/506/507)
    - N97 mini (RM-555)

    - When using New Protocol flashing, software reminds about correct TX2 cable and yellow adapter
    - Added Manual Mode to retrieve SL3 NCK if you dont have phone in hand (just enter IMEI when asked)
    - Added "Erase NCK Codes" - this should be used when phones needs to be factory-relocked (best to use with SL3 if you want to clear entered NCK codes). Work with SL2 too. Simlock area is untouched when Relocking to factory state, and warranty will still be ok. Seems first software on market with such funcionality.
    - Fixed BlackBerry calculation problems, old version never closed TCP connection after success or non-success calculation
    - Firmware v1.46 Released, Added SL3 Routines
    - Minor changes and bugfixes Example SL3 unlocked by new update


    Code:
    BB5 Unlock Started...
    MCU Version V 07.95
    MCU Date 03-02-10
    Product RM-495
    Manufacturer (c) Nokia
    IMEI 351538045311523
    Mastercode 4612735731
    Simlock Server SIMLOCK SERVER
    Simlock Key 2600300000000000
    Simlock Profile 8000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26003F
    Connecting to Cyclone Server...
    Cyclone Server (1.0.0.632), Cyclone Box Team 2008, 2009, 2010 - Ready.
    Checking job status...
    Code Ready, Code: #pw+966057384237461+7#
    Sending code via FBUS...
    NCK[7] - ACCEPTED
    Code Accepted! Unlocking Finished! Where from download?
    RapidShare:

    http://rapidshare.com/files/41068486...aller.exe.html

    A firmware upgrade to v1.46 is needed to use this update!

    Stay tuned,
    Best Regards,
    Cyclone Team
    Izmenio Eprom : 03-08-10 u 06:49

  32. #32
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    CycloneBox Blackberry module updated

    --------------------------------------------------------------------------------

    ALL LATEST PHONES WITH NEW SECURITY ARE SUPPORTED NOW WITH CYCLONE BOX (BY IMEI AND CABLE)

    HERE IS THE LIST OF SUPPORTED MEPS


    MEP-16826-001
    MEP-17232-001
    MEP-17490-001
    MEP-17568-002
    MEP-18601-001
    MEP-18637-001
    MEP-10073-001
    MEP-10129-001
    MEP-10129-002
    MEP-10129-003
    MEP-10129-004
    MEP-10129-005
    MEP-11016-001
    MEP-11139-001
    MEP-11139-002
    MEP-11139-003
    MEP-11139-004
    MEP-11139-005
    MEP-04103-001
    MEP-04103-002
    MEP-04103-004
    MEP-04104-003
    MEP-04104-004
    MEP-04104-005
    MEP-04104-006
    MEP-04104-007
    MEP-04546-001
    MEP-04598-003
    MEP-04598-004
    MEP-04598-005
    MEP-04626-001
    MEP-04626-002
    MEP-04938-001
    MEP-04938-002
    MEP-05277-001
    MEP-05277-002
    MEP-05277-004
    MEP-05277-005
    MEP-06041-001
    MEP-06041-003
    MEP-06041-004
    MEP-06041-005
    MEP-06041-006
    MEP-06041-007
    MEP-06041-008
    MEP-06041-009
    MEP-06041-010
    MEP-06068-001
    MEP-06068-002
    MEP-06259-002
    MEP-06259-003
    MEP-06423-001
    MEP-06424-001
    MEP-06424-002
    MEP-06529-001
    MEP-06529-002
    MEP-06530-001
    MEP-06530-002
    MEP-06810-002
    MEP-06811-003
    MEP-06812-001
    MEP-06812-003
    MEP-06812-004
    MEP-06813-001
    MEP-06813-002
    MEP-06814-001
    MEP-06814-002
    MEP-06814-004
    MEP-06814-005
    MEP-06849-001
    MEP-06849-002
    MEP-06893-001
    MEP-06899-001
    MEP-06899-002
    MEP-07321-002
    MEP-07484-001
    MEP-07484-002
    MEP-07484-003
    MEP-07484-004
    MEP-07484-005
    MEP-07484-006
    MEP-07484-007
    MEP-07705-002
    MEP-07705-003
    MEP-07722-001
    MEP-07722-002
    MEP-07722-003
    MEP-07723-001
    MEP-07723-003
    MEP-07723-004
    MEP-07723-005
    MEP-07723-006
    MEP-07723-007
    MEP-07754-001
    MEP-08209-001
    MEP-08209-002
    MEP-08209-003
    MEP-08318-001
    MEP-08395-001
    MEP-08448-001
    MEP-08448-002
    MEP-08589-001
    MEP-08881-001
    MEP-08882-001
    MEP-08918-001
    MEP-09004-001
    MEP-09070-001
    MEP-09149-001
    MEP-09292-001
    MEP-09292-002
    MEP-09292-003
    MEP-09292-004
    MEP-09292-005
    MEP-09293-001
    MEP-09625-001
    MEP-09667-001
    MEP-09690-001
    MEP-09747-001
    MEP-09783-002
    MEP-09783-003
    MEP-09821-001
    MEP-09821-002
    MEP-09821-003
    MEP-09917-001
    MEP-09938-001
    MEP-11139-006
    MEP-11246-001
    MEP-11246-002
    MEP-11414-001
    MEP-11414-002
    MEP-11534-002
    MEP-11534-004
    MEP-11534-005
    MEP-11534-006
    MEP-11534-007
    MEP-11534-008
    MEP-12186-001
    MEP-12209-003
    MEP-12209-004
    MEP-12209-006
    MEP-12209-007
    MEP-12209-008
    MEP-12488-001
    MEP-12565-001
    MEP-12579-001
    MEP-12579-002
    MEP-12599-003
    MEP-12622-002
    MEP-12907-002
    MEP-12978-001
    MEP-12980-001
    MEP-12980-002
    MEP-13188-001
    MEP-13188-002
    MEP-13188-006
    MEP-13188-007
    MEP-13188-008
    MEP-13188-010
    MEP-13710-001
    MEP-13928-001
    MEP-13928-002
    MEP-13988-001
    MEP-13990-001
    MEP-14052-001
    MEP-14052-002
    MEP-14074-001
    MEP-14074-002
    MEP-14074-003
    MEP-14150-001
    MEP-14260-001
    MEP-14260-002
    MEP-14896-001
    MEP-14896-002
    MEP-14896-003
    MEP-14896-004
    MEP-14896-005
    MEP-15159-001
    MEP-15159-002
    MEP-15326-001
    MEP-15326-002
    MEP-15343-001
    MEP-16272-002
    MEP-16272-003
    MEP-16272-005
    MEP-16352-001
    MEP-16419-001
    MEP-16472-001
    MEP-19322-003
    MEP-19877-001
    MEP-20099-002
    MEP-20099-004
    MEP-20099-009
    MEP-20166-001
    MEP-20454-001
    MEP-20669-001
    MEP-21545-001
    MEP-21878-001
    MEP-22793-001
    MEP-23361-001
    MEP-24124-001
    MEP-24409-002
    MEP-24660-001
    MEP-24667-001
    MEP-24667-002
    MEP-24723-001
    MEP-24723-002
    MEP-26594-001
    MEP-26900-003
    MEP-27488-001
    MEP-27501-003
    MEP-28240-002
    MEP-28364-001
    MEP-28555-001
    MEP-29080-002
    MEP-29318-001
    MEP-30218-001
    MEP-30218-002
    MEP-30638-001
    MEP-30669-001
    MEP-31845-001
    MEP-33006-002

    NOTE : This is sever side update , you dont have to download or do anything



    br
    CycloneBox Team

  33. #33
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone Calculator v1.00

    - Calculates Alcatel NCK/SPCK codes
    - Calculates Blakcberry Engineering Code
    - 100% free and standalone, no need any activations
    - Box needs be attached upon software startup (in either bootloader or main mode)

    - Supported Models

    B331
    BlueBelt
    C700
    C701
    C707
    C717
    C820
    C825
    E101FLIP
    EL03
    I650
    MANDARINA DUCK
    MISS SIXTY
    OT103
    OT203
    OT203A
    OT203E
    OT280
    OT303
    OT360
    OT363
    OT383
    OT600
    OT660
    OT708
    OT800
    PLAYBOY
    S215
    S218
    S319
    S320
    S321
    S520
    S621
    S853
    V570
    V670
    V770
    VM621I

    - Supported Models/Operators:

    OT303 AEUY1
    OT303 ALAE1
    OT303 ALAP1
    OT303 ALAR1
    OT303 ALBE1
    OT303 ALBG1
    OT303 ALBR1
    OT303 ALBY1
    OT303 ALCY1
    OT303 ALEU1
    OT303 ALFR1
    OT303 ALGB1
    OT303 ALIE1
    OT303 ALIN1
    OT303 ALIT1
    OT303 ALKE1
    OT303 ALKZ1
    OT303 ALLY1
    OT303 ALNC1
    OT303 ALNL1
    OT303 ALRO1
    OT303 ALRU1
    OT303 ALTR1
    OT303 AVCL1
    OT303 AVDO1
    OT303 AVDO3
    OT303 AVPA1
    OT303 AVPA3
    OT303 BBPG1
    OT303 BYFR1
    OT303 CECO1
    OT303 CECO3
    OT303 CFMK1
    OT303 CSGR1
    OT303 EECL3
    OT303 FOIL1
    OT303 FOIL2
    OT303 HYIL1
    OT303 LIAR1
    OT303 LVAR1
    OT303 M1TE1
    OT303 MCMA1
    OT303 MSUA1
    OT303 MVGT1
    OT303 OTFA1
    OT303 PCEC1
    OT303 PCEC3
    OT303 RGDO1
    OT303 RGDO3
    OT303 RGFA1
    OT303 RGGQ1
    OT303 RGMU1
    OT303 RGSN1
    OT303 RGTE1
    OT303 RGTE2
    OT303 SFFR1
    OT303 SFRE1
    OT303 T2CV1
    OT303 TBHU1
    OT303 TGMX1
    OT303 TLMX1
    OT303 TLMX3
    OT303 TLUY1
    OT303 VAVN1
    OT303 VDFJ1
    OT303 VMVE1
    OT303 WCDO1
    OT303 WNIT1
    OT303 WRCB1
    OT303 WYIL1
    OT360 AVPE1
    OT360 CECO3
    OT360 LIAR1
    OT360 LVAR1
    OT360 TLUY1
    OT360 TLVE1
    OT360 WCDO1
    OT363 ALAE1
    OT363 ALAP1
    OT363 ALBR1
    OT363 ALBY1
    OT363 ALCY1
    OT363 ALES1
    OT363 ALEU0
    OT363 ALEU1
    OT363 ALFR1
    OT363 ALGB1
    OT363 ALGR1
    OT363 ALKZ1
    OT363 ALNC1
    OT363 ALPL1
    OT363 ALRO1
    OT363 ALRU1
    OT363 ALUA1
    OT363 AVDO3
    OT363 BBPG1
    OT363 BYFR1
    OT363 CECO3
    OT363 CFMK1
    OT363 EECL3
    OT363 EKES1
    OT363 KPNL1
    OT363 MVGT1
    OT363 MVHN1
    OT363 MVSV1
    OT363 OTFA1
    OT363 RGCH1
    OT363 RGDO1
    OT363 RGDO3
    OT363 RGES1
    OT363 RGFA1
    OT363 RGFR1
    OT363 RGGB1
    OT363 RGMD1
    OT363 RGPL1
    OT363 RGRE1
    OT363 RGRO1
    OT363 RGTE1
    OT363 RGTE2
    OT363 RGTE5
    OT363 TIIT1
    OT363 TLES1
    OT363 TLMX1
    OT363 TLMX3
    OT363 TLUY1
    OT363 UUUS1
    OT363 VAVN1
    OT363 VDES1
    OT363 VDFJ1
    OT363 WCDO1
    OT383 AEUY1
    OT383 ALAE1
    OT383 ALEU1
    OT383 ALFR1
    OT383 ALGR1
    OT383 ALNC1
    OT383 ALRU1
    OT383 ALUA1
    OT383 CECO3
    OT383 OTFA1
    OT383 RGFA1
    OT383 RGTE1
    OT383 RGTE2
    OT383 RGTE5
    OT383 TGMX1
    OT383 TGMX3
    OT383 TLMX1
    OT383 TLMX3
    OT383 TLVE1
    OT383 TLVE3
    OT383 VDFJ1
    OT600 AEUY1
    OT600 AGEC1
    OT600 ALAP1
    OT600 ALCY1
    OT600 ALDE1
    OT600 ALEU1
    OT600 ALHK1
    OT600 ALLY1
    OT600 ALNL1
    OT600 ALUA1
    OT600 AVCL1
    OT600 AVDO3
    OT600 AVPE1
    OT600 CECO3
    OT600 CFMK1
    OT600 CSGR1
    OT600 MVHN1
    OT600 OTFA1
    OT600 RGDO3
    OT600 RGFA1
    OT600 RGTE1
    OT600 RGTE2
    OT600 TBHU1
    OT600 TIVE1
    OT600 TLCL3
    OT600 TLMX1
    OT600 TLMX3
    OT600 VRGB1
    OT600 WCDO1
    OT660 AEUY1
    OT660 ALAE1
    OT660 ALAP1
    OT660 ALBR1
    OT660 ALBY1
    OT660 ALES1
    OT660 ALEU1
    OT660 ALFR1
    OT660 ALHK1
    OT660 ALIE1
    OT660 ALIT1
    OT660 ALKE1
    OT660 ALKZ1
    OT660 ALLY1
    OT660 ALNC1
    OT660 ALRU1
    OT660 ALUA1
    OT660 AVDO3
    OT660 AVPA3
    OT660 AVPE1
    OT660 AVUY1
    OT660 CECO3
    OT660 CFMK1
    OT660 EBES1
    OT660 EKES1
    OT660 LIAR1
    OT660 LVAR1
    OT660 MVHN1
    OT660 PGIT1
    OT660 PSAR1
    OT660 RGTE5
    OT660 SFRE1
    OT660 SVRU1
    OT660 TBGB1
    OT660 TGMX1
    OT660 TLCO3
    OT660 TLMX1
    OT660 TLMX3
    OT660 TLUY1
    OT660 TLUY3
    OT660 UCUS1
    OT660 VMVE1
    OT660 VMVE3
    OT660 WCDO1
    OT708 ADGB1
    OT708 AEUY1
    OT708 AGEC1
    OT708 AHNL1
    OT708 ALAE1
    OT708 ALAP1
    OT708 ALBG1
    OT708 ALBY1
    OT708 ALCL1
    OT708 ALES1
    OT708 ALEU1
    OT708 ALFR1
    OT708 ALGB1
    OT708 ALGH1
    OT708 ALGR1
    OT708 ALHK1
    OT708 ALIT1
    OT708 ALKE1
    OT708 ALKZ1
    OT708 ALLY1
    OT708 ALMX1
    OT708 ALNC1
    OT708 ALNP1
    OT708 ALPL1
    OT708 ALRO1
    OT708 ALRU1
    OT708 ALSG1
    OT708 ALTR1
    OT708 ALUA1
    OT708 ALUS1
    OT708 AVAR1
    OT708 AVCL1
    OT708 AVDO1
    OT708 AVDO3
    OT708 AVPA3
    OT708 AVPE1
    OT708 AVPR1
    OT708 AVUY1
    OT708 BBPG1
    OT708 BYFR1
    OT708 CECO1
    OT708 CECO3
    OT708 CFMK1
    OT708 CJUS1
    OT708 EBES1
    OT708 EECL1
    OT708 EECL3
    OT708 EKES1
    OT708 FOUS1
    OT708 IUUS1
    OT708 IWUS1
    OT708 LIAR1
    OT708 LRFR1
    OT708 LVAR1
    OT708 M1TE1
    OT708 MCMA1
    OT708 MDBE1
    OT708 MVCO1
    OT708 MVGT1
    OT708 MVHN1
    OT708 MVSV1
    OT708 OTFA1
    OT708 PMPT1
    OT708 PSAR1
    OT708 QUUS1
    OT708 RDES1
    OT708 RGCH1
    OT708 RGDO3
    OT708 RGES1
    OT708 RGFA1
    OT708 RGFR1
    OT708 RGGB1
    OT708 RGRE1
    OT708 RGRO1
    OT708 RGSN1
    OT708 RGTE1
    OT708 RGTE2
    OT708 RGTE5
    OT708 SDUS1
    OT708 SFRE1
    OT708 SVRU1
    OT708 TBNL1
    OT708 TGMX1
    OT708 TGMX3
    OT708 TLAR1
    OT708 TLAR3
    OT708 TLCL3
    OT708 TLCO3
    OT708 TLES1
    OT708 TLGT3
    OT708 TLMX1
    OT708 TLMX3
    OT708 TLNI1
    OT708 TLSV3
    OT708 TLUY1
    OT708 TLVE3
    OT708 TWGB1
    OT708 UCUS1
    OT708 UUUS1
    OT708 UVUS1
    OT708 VDAU1
    OT708 VDCY1
    OT708 VDDE1
    OT708 VDES1
    OT708 VDFJ1
    OT708 VDGB1
    OT708 VDGH1
    OT708 VDGR1
    OT708 VDHU1
    OT708 VDIE1
    OT708 VDIT1
    OT708 VDLU1
    OT708 VDMK1
    OT708 VDMT1
    OT708 VDMY1
    OT708 VDNL1
    OT708 VDNZ1
    OT708 VDPT1
    OT708 VDPT2
    OT708 VDRO1
    OT708 VGFR1
    OT708 VMVE1
    OT708 VMVE3
    OT708 WCDO1
    OT708 ZAGA1
    OT800 AEUY1
    OT800 AGECA
    OT800 ALAE1
    OT800 ALAP1
    OT800 ALAT1
    OT800 ALBR1
    OT800 ALCN1
    OT800 ALCN2
    OT800 ALDE1
    OT800 ALES1
    OT800 ALEU1
    OT800 ALEU2
    OT800 ALFR1
    OT800 ALGB1
    OT800 ALGH1
    OT800 ALGR1
    OT800 ALHK1
    OT800 ALHU1
    OT800 ALIT1
    OT800 ALLY1
    OT800 ALNC1
    OT800 ALNL1
    OT800 ALPL1
    OT800 ALRS1
    OT800 ALRU1
    OT800 ALUA1
    OT800 ALUS1
    OT800 ALUSH
    OT800 AVAR1
    OT800 AVCL1
    OT800 AVPE1
    OT800 AVPR1
    OT800 AVPY1
    OT800 AVUY1
    OT800 BBPG1
    OT800 BOCN1
    OT800 BTIT1
    OT800 BYFR1
    OT800 CFMK1
    OT800 CJUS1
    OT800 CJUSH
    OT800 CUFR1
    OT800 DWUS1
    OT800 EECL3
    OT800 EKES1
    OT800 ERPL1
    OT800 FOUS1
    OT800 GUUS1
    OT800 HBMY1
    OT800 ICCR1
    OT800 IUUS1
    OT800 IUUSH
    OT800 IWUS1
    OT800 JCAU1
    OT800 KPNL1
    OT800 LIAR1
    OT800 MDBE1
    OT800 MVGT1
    OT800 MVGTA
    OT800 MVHN1
    OT800 MVSV1
    OT800 OCUS1
    OT800 OTFA1
    OT800 PCEC1
    OT800 PCEC3
    OT800 QUUS1
    OT800 RCUS1
    OT800 RGFA1
    OT800 RGFR1
    OT800 RGMG1
    OT800 RGMU1
    OT800 RGRE1
    OT800 RGRO1
    OT800 RGSN1
    OT800 RGTE2
    OT800 RGTE5
    OT800 SDUS1
    OT800 SFFR1
    OT800 SXIN1
    OT800 SYUS1
    OT800 TBCZ1
    OT800 TBEU1
    OT800 TBGB1
    OT800 TBHU1
    OT800 TBMK1
    OT800 TBNL1
    OT800 TGMX1
    OT800 TGMX3
    OT800 TIIT1
    OT800 TIVE1
    OT800 TLAR1
    OT800 TLARB
    OT800 TLCLB
    OT800 TLCOB
    OT800 TLECB
    OT800 TLGT3
    OT800 TLMX1
    OT800 TLMXA
    OT800 TLPEB
    OT800 TLSVB
    OT800 TLUY1
    OT800 TLUYB
    OT800 TLVEB
    OT800 TWGB1
    OT800 UCUS1
    OT800 UUUS1
    OT800 UVUS1
    OT800 VAVN1
    OT800 VDFJ1
    OT800 VDLU1
    OT800 VDPT1
    OT800 VLUS1
    OT800 VMVE1
    OT800 VMVE3
    OT800 VNRS1
    OT800 WCDO1
    OT800 WCUS1
    OT800 WCUSH
    OT800 YAID1
    OT800 ZAGA1
    OTV570 ALAP1
    OTV570 ALES1
    OTV570 ALEU1
    OTV570 ALFR1
    OTV570 ALGR1
    OTV570 ALLY1
    OTV570 AVDO1
    OTV570 CECO1
    OTV570 RGFR1
    OTV570 RGFR2
    OTV570 T1MG1
    OTV570 TLCL1
    OTV570 TLMX1
    OTV570 TZTN1
    OTV570 VDFJ1
    OTV570 VMVE1
    OTV570 VVBG1
    S621 KPNL1
    S621 RGCH1
    S621 RGMU1
    S621 RGPL1
    S621 RGRE1
    S621 RGTE1
    S621 T1MG1
    S621 TBHR1
    S621 TBMK1
    S621 TLMX1
    S621 VDFJ1
    S621 VRGB1
    VM621I AEUY1
    VM621I AGEC1
    VM621I ALAP1
    VM621I ALCY1
    VM621I ALDE1
    VM621I ALEU1
    VM621I ALHK1
    VM621I ALLY1
    VM621I ALNL1
    VM621I ALUA1
    VM621I AVCL1
    VM621I AVDO3
    VM621I AVPE1
    VM621I CECO3
    VM621I CFMK1
    VM621I CSGR1
    VM621I MVHN1
    VM621I OTFA1
    VM621I RGDO3
    VM621I RGFA1
    VM621I RGTE1
    VM621I RGTE2
    VM621I TBHU1
    VM621I TIVE1
    VM621I TLCL3
    VM621I TLMX1
    VM621I TLMX3
    VM621I VRGB1
    VM621I WCDO1


    Download LINK

    http://www.cyclonebox.com/downloads/...Calculator.exe
    br
    Cyclone Team

  34. #34
    GSM Master rus's Avatar
    Clan br.
    12448
    Registrovan
    Jun 2009
    Lokacija
    BiH "Velika Kladusa"
    Godina
    39
    Br. postova
    736
    Hvala
    646
    Pohvaljen 239 puta u 158 postova
    Cyclone Box Installer v1.10 FBUS2USB, TurboCache, Infineon XGold Imei, Loaders & more
    CYCLONE TEAM

    proudly presents
    Cyclone Box Installer v1.10
    What's new?

    - Infineon XGold IMEI Backup/Restore added (First in the world)
    - New BB5 FBUS/USB Loaders v10.34.1 introduced
    - BB5 USB Flashing module rewritten, supports new Flashing Type: FUR USB - using FBUS loaders on USB. Is possible now to do also RPL write, Cert's read/write/erase, using just USB cable. Full FBUS protocol emulation over USB supported!
    - FBUS2USB RAPU Support
    - FBUS2USB RAP4 Support
    - FBUS2USB Broadcomm Support
    - Broadcomm platform flashing added (Nokia X2,....)
    - 6700,E52 and other RAPunistore Booting fixed (Wrong First Char Received)
    - SL3 Simlock RPL Write Introduced
    - DCT4/BB5 Flash TurboCache added, increasing flashing speed a bit
    - The Profile Bits is now analyzed before SL3 Unlock (it will not submit job if phone have blocked NCK unlocking - i.e. Telcel Mexico units)
    - New NCK unlocking method for SL2 phones introduced (with latest MCU SW versions)
    - Added Autologging (operation logs are stored in StoredFiles)
    - Added USB Full RPL Backup (NPC,CCC,HWC,Simlock,WMDRM,etc)
    - Added StatusBar in Nokia Tool, displaying current Task/Mobile attached
    - DCC Camera Repair added for module NI00BC0000030102F201
    - DCC Camera Repair added for module ISL3TI0200000C000002
    - DCC Camera Repair added for module IS00TI0200000C208A03
    - DCC Camera Repair added for module IS00TI02000001022B04
    - DCC Camera Repair added for module 86000300010401022B04
    - DCC Camera Repair added for module 8600030001040C208A03
    - DCC Camera Repair added for module 86L10300010406260004
    - DCC Camera Repair added for module 86L10300010406260000
    - DCC Camera Repair added for module 86L103000104094C1003
    - Refactorized GUI thread problems
    - Improved stability of Blackberry calculator
    - Improved flashing speed with Skins Enabled
    - Added detailed Action Statusbar

    We are not finish yet so
    Here we Go again


    - Added CBUS StatusBar, indicates "---->" on USB Transmit, "<----" on USB Receive, Idle and Errors
    - Support area is rebuilt - file list parsing is optimized
    - "Connection Closed Gracefully" in Support Area fixed
    - Connection recovery in SupportArea added
    - Fixed "Floating Point Divison by zero" in Support Area
    - Entered NCK codes are now backed-up too upon Simlock Backup
    - New progressbar introduced in Nokia Tool gui
    - Improved USB SwitchToRaw
    - Improved ADL Server Pooling
    - Improved USB Phone Pooling
    - USB BootRom detect routine rebuilt
    - Fixed "Access Violation" while application exit
    - Fixed Registration Tool bug when "Submit" button is not shown after Box Prepare
    - Fixed bug when software after minimizing to tray don't appears at taskbar
    - Added "KB Left", "Time Left", "Current Speed" real-time information while downloading files from support
    - The Germany Server is now default Support Server
    - Added support for Box HW Revisions B, thus is A11F, B110, B111 and B112, and other B11x
    - Old "INI" File Parser Module added (for Old DCT4 phones)
    - Old "INI" File parser Module added (for Old BB5 phones)
    - Added support for 6630,6680,N70 ini parser (DPConverted v1-v2 VPL files)
    - The product name is now resolved at Product List (i.e. RM-1 (6630))
    - Auto-select flashfiles added (selects product and variants on Read Phone)
    - The new method of BB5 NCK Calculation is now the default Unlock Method for BB5 mobiles. For SL3 use SL3 Online Code Calculation.
    - "Abort" button added, this terminating all threads (during flash, erase, unlock, whatever)
    - Skin Manager updated to v7.02, much stable and faster
    - Fixed box hangup problem when PC goes to sleep mode
    - During SL3 Check/Submit job, phone is readen first, then server transaction starts (to not overload server resources)
    - Failed to Process Initial Challenge (2) during Bootloader Upgrade fixed
    - During SL3 Submit Job software now try first to read PM 120 and detect if phone is SL3
    - Small changes regarding SL3 Submit Job - should work bit smoother right now with bad cables
    - Updated message about SL3 Credit consumption
    - Added bigger delay between entering NCK codes (bruteforce protection)
    - Fixed "Canvas does not allow drawing" while SL3 Manual Mode
    - Cyclone Secure Bootloader v2.13 Released
    - Cyclone Main Firmware v01.49 Released
    - Cyclone Calculator v1.00 added into installer
    - Cyclone USB Drivers Updated to 1.0.0.5
    - Connectivity Cable drivers updated to 7.1.34.0
    - Minor changes and bugfixes



    How to update?
    1. Uninstall old installer
    2. Download new installer
    3. Install it
    4. Upgrade box firmware
    5. Enjoy

    Where to download?

    http://www.karwos.hk/CycloneBoxInstaller.exe

  35. #35
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    SL3 Brute Force unlimited and Free (count down started)
    As soon as we get free from Mr Karwos Birthday Party
    SL3 solution with Complete info will be posted and offcourse
    WITHOUT ANY

    LOGS

    AND

    ACTIVATION



    So stay Tune

    for updates check this thread
    SL3 Brute Force unlimited and Free (count down started)



    br
    CycloneBox Team

  36. #36
    GSM Master dr.Pava's Avatar
    Clan br.
    271
    Registrovan
    Oct 2005
    Lokacija
    obrenovac
    Godina
    44
    Br. postova
    634
    Hvala
    39
    Pohvaljen 70 puta u 50 postova
    Hi, New firmware is uploaded to server and ready to get written to Your boxes

    Changes:
    - Standalone SL3 Unlock routines added
    - Small fixed betwen Main->Bootloader mode transition with JCOP31 36kb cards
    - Minor changes,bugfixes

    We still testing EXE (have various card vendors, gpu types here) hopefully will be ready to release in few hours
    We will post together all informations,manuals well explained, etc.

    Every box have 3 update credits.

    Best Regards,

  37. #37
    GSM Master veliki's Avatar
    Clan br.
    13
    Registrovan
    Aug 2005
    Lokacija
    slovenia
    Godina
    44
    Br. postova
    368
    Hvala
    13
    Pohvaljen 36 puta u 20 postova
    CycloneBox FREE and STANDALONE SL3 Unlock RELEASED!!!


    Hi,

    Small manual how-it-works:

    1. Read SL3 Log file (BB5, Simlock Tabs, Group "Local SL3 Bruteforce", Button Read LOG File)
    2. Save the readen Log File somewhere. It contains necessary informations needed to calculate code.
    3. Use "log2cod Calculator" to calculate COD file. Processing speed depends on GPU installed at your PC. log2cod calculator supports calculation resume (on power-off fail, etc).
    4. Once COD file is ready, use "Send COD File to Server" button to Submit Calculation Result to our server for further processing
    5. You can unlock your phone now as it would be unlocked by our servers (Select SL3 Online RPL Calculation method, and press Direct Unlock), you may also use Manual Mode if phone is away.

    Download Link: http://www.karwos.hk/CycloneSL3_Standalone.rar

    PS. yes, no need to pay for USELESS MX Credits!!

  38. #38
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone SL3 FREE and UNLIMITED RELEASED !!!

    --------------------------------------------------------------------------------

    This is 8 post in row, hope will not be delted by admins again.........

    Small manual how-it-works:

    1. Read SL3 Log file (BB5, Simlock Tabs, Group "Local SL3 Bruteforce", Button Read LOG File)
    2. Save the readen Log File somewhere. It contains necessary information needed to calculate code.
    3. Use "log2cod Calculator" to calculate COD file. Processing speed depends on GPU installed at your PC. log2cod calculator supports calculation resume (on power-off fail, etc).
    4. Once COD file is ready, use "Send COD File to Server" button to Submit Calculation Result to our server for further processing
    5. You can unlock your phone now as it would be unlocked by our servers (Select SL3 Online RPL Calculation method, and press Direct Unlock), you may also use Manual Mode if phone is away.

    Note1. No, this will not work with Mobile GPU (ati mobility, nvidia m... , )
    Note2. You need special GPU (or 2xgpu in crossfire), check here (more sha1 perf points - better speed) GPU estimations
    Note3. Reading log, calculating process is standalone. After calculating COD file, it needs be submitted to server (for calculating level1-level7 codes), its immediatly and free ofcourse...
    Note4. We tested on both gpu:
    - 2xHD5970 and searching 1 possiblity is ~22 seconds (total 220000 seconds - worst case - ~61 hours).
    - Old Nvidia GT8800 GPU ( i think it have about 4 years now ), searching 1 possibilty is ~660 seconds (total 6600000 seconds, thus worst case is ~1833 hours (76 days))
    Note5. I got "Too many child process failure" message. That means your GPU is unsupported, or is too weak.. OR some problem really occured.
    Note6. We aren't disabling our servers, since this solution will suit only for some (5%) of ppls, and needs investment in HW.

    Discussion Thread: CycloneBox FREE and STANDALONE SL3 Unlock RELEASED!!!
    Download Link: http://www.karwos.hk/CycloneSL3_Standalone.rar

    Best Regards,
    Cyclone Team

  39. #39
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Cyclone DEMOLITION! XGold1 Unlock/RPL, XGold2 Flash/RPL, W7 64bit, New log2cod, more.

    --------------------------------------------------------------------------------

    Hi, Installer v1.11 is Ready.

    What's new ?

    Quote:
    =====================
    Installer v1.11
    07.03.2011
    =====================
    - New BB5 FBUS/USB Loaders v10.48.1 introduced
    - DCT4/BB5 Product/Variant caching added. Saves lot of time when selecting correct Datapackage. This is done automaticcly. During Deletion or Installing some of DP, cache is rebuilt automatically on user demand.
    - XGold2 USB Flashing Introduced (C1-01,C1-02,C2-00,...)
    - Added XGold2 RPL Backup (including CCC,HWC,NPC,Simlock) - FIRST in the world. The backup is created automatically during flash.
    - Added XGold2 RPL Write (CCC,HWC,NPC and Simlock) seems FIRST in the world. In order to write RPL file, you need flash your phone and add RPL file as secondary flashing Image (Add XGold2 RPL button).
    - XGold2 RPL Contains FULL phone security, possible to Full restore after Flash Chip change
    - Added XGold1 Unlocking by Reading LOG2COD Log file
    - Added XGold1 Low-Level PM Dumping (both Secured and Nonsecured areas), seems 1st in world
    - Added XGold1 Low-Level RPL Backup, seems 1st in world
    - XGold1 Backed-up RPL file might be used to completly Re-Initialize phone security, i.e. after flash-chip change (RPL Contains IMEI and Simlock Block), seems 1st in world...
    - Both XGold1 Low Level dumps support dead phones (phone might be dead, Cyclone will binary dump PM from flash chip directly)
    - Added XGold1 Low-Level Deleted PM Keys dumping (extra option-don't write back readen PM file with deleted keys, they are ASCII marked as deleted ones). Support deleted messages, contacts, ..., seems 1st in world
    - Added XGold1 FBUS/Keyboard SL Bad Entries Counter reset, seems 1st in world
    - Reading XGOLD1 LOG2COD is fully standalone, seems 1st in world
    - XGold1 Unlock/RPL supported mobiles: 1616, 1280, 1208, 1209, 1800, C1-00, and others...
    - Added "Mapped At" FlashChip information during XGold Flashing, when possible
    - Added "Sector Size" FlashChip information during XGold Flashing, when possible
    - No reboot flashing for XGold added
    - APE block flashing fixed for various RAPIDO mobiles
    - Fixed Old Protocol (Dead) USB Flashing (RAPIDO phones: N86,etc)
    - Fixed Blackberry Module - upon reading MEP via USB it was placing it on wrong window
    - Assigned COD files are now verified before sending to server, the auxiliary verification also takes place at Server Side
    - Fixed OpenDialog filter when adding DCT4/BB5 flash file
    - log2cod: v1.1 Released
    - log2cod: GPU Selftests added (some GPU find bad code, or didn't find anything at all)
    - log2cod: Added Ivan Golubev EULA
    - log2cod: Added Queue managment
    - log2cod: Code Verification added after successfull calculation
    - log2cod: Console is cleared after some salts processed in order to avoid overflow
    - log2cod: PeekNamedPipe() problem fixed
    - log2cod: Added queue processing in loop mode (you can add new jobs during calculation)
    - The transaction bar have been a bit resized
    - Cyclone Box HW Rev B11x, C11x added
    - Models.ini updated
    - Box USB Drivers updated to v1.0.0.6 - they are digitally signed now, no more problems on Win7 / Win Vista x64
    - COM Emulation Service Driver updated to v1.0.0.1 - it is digitally signed now, no more problems on Win7 / Win Vista x64
    - Main Software is now Digitally Signed (Authenthicode)
    - log2cod is now Digitally Signed (Auhtenthicode)
    - Cyclone Calculator is now Digitally Signed (Authenthicode)
    - Installer is now Digitally Signed (Auhtnethicode)
    - New phones added to Virgin SX4 Database
    - New phones added to Security Database (Virgin RPL)
    - Box Firmware v1.53 Released
    - Some minor and major changes and bugfixes
    - Versions snap
    Installer v1.11
    Main x86 Application v1.0.0.11003
    x86 Memory Manager v4.76.0.179
    Native USB Drivers v1.0.0.6
    USB-COM Stack Drivers v1.0.0.1
    Onboard Secure Bootloader v2.13
    Onboard Main Nokia Application v1.53
    Onboard COM Emulation Code v1.00
    Onboard Security Card Revision v1.10
    Nokia Connectivity Cable Drivers 7.1.34.0
    BB5 USB/FPIF Single Line/FPIF DualLine v20110301
    DCT4 FPIF Single Line/USB v20100410
    DCT4 Unlock Patches DEPRECATED
    Communication Stack SSLv3-keys-06092008
    Skin Stack v7.21

    Box Firmware v1.53 is needed.
    Download Link: http://www.karwos.hk/CycloneBoxInstaller.exe

    ps1. yes, germany support server HDD is physsicly crashed.. it will be back in few days.. hope with noncorrupted content.
    ps2. be prepared for more standalone&HOT things these days
    ps3. new drivers included in this package are ONLY compatible with this new version. Don't try using them on older builds and vice versa !

    Best Regards,
    Cyclone Team

  40. #40
    GSM Expert Vlada84's Avatar
    Clan br.
    947
    Registrovan
    Mar 2006
    Lokacija
    Beograd
    Godina
    35
    Br. postova
    945
    Hvala
    126
    Pohvaljen 189 puta u 133 postova

    Cyclone Standalone Unlock/SX4 Auth/SD Keys repair for 6700,E52,E55,E72,X3,.. added

    Cyclone Standalone Unlock/SX4 Auth/SD Keys repair for 6700,E52,E55,E72,X3,.. added

    Hi, new update for Cyclone box is avaiable.

    - Added SP unlock via server / log2cod reading
    - Added standalone SX4 auth
    - Added standalone Superdongle Keys Repair
    - Supported phones:
    - RAPU Based: 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72
    - RAP4 Based: 3710, 5330, 7230, 6303i, X3

    All is free and standalone Box firmware upgrade to v1.54 is needed.

    Download Link: http://www.karwos.hk/Cyclone_RAPU_RAP4_Unlock.rar - please extract to your current Cyclone box directory...
    Installer link: http://www.karwos.hk/CycloneBoxInstaller.exe

    More will come next week ... or this week. Who knows.

    Ps1. Please install installer v1.11 first (this one releaesed yesterday).
    Ps2. Dont forget to upgrade drivers! Else you will get "Security problem #5"

    Best Regards,
    Cyclone Team

Strana 1 od 3 123 PoslednjiPoslednji

Slicne teme

  1. HWK update 28/10/2007
    Postovao XisiX u forumu HWK
    Odgovori: 25
    Zadnji post: 31-10-07, 20:57

Pravila postovanja

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •