Strana 3 od 3 PrviPrvi 123
Prikazivanje rezultata 81 do 120 od 120

Tema: ChineseMiracle update

  1. #81
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    Infinity Chinese Miracle-2 MTK/Mediatek v1.48 - Helio P10 (MT6755), Android 6 etc.

    Infinity Chinese Miracle-2 MTK/Mediatek v1.48 - Helio P10 (MT6755) support, Android 6 and more

    - Main
    MTK DACore V2 support released (MT6755 and similar new CPU)
    FlashEngine support:
    *FW Read and Write
    *Factory FW write
    *Verify HW and SW info (HW Check option)
    *Repart Memory (Repartition option)
    *Safe Erase Flash (Flash Erase option)
    *DataDirect Operations
    *Wide range of service and Repair operations

    Core update for support latest v1616 loaders
    Flash ID database updates
    Definition base updated and revised

    - MediaTek Helio P10 (MT6755) support activated!
    Instead of half and fake solutions we present complete MT6755 CPU support with the next features:
    Firmware Read and Write (as factory one)
    Factory FW flashing
    Read full info (with extended and security info)
    FlashDump Read / Write
    NVRAM Read / Write
    UserLocks Reset (include fingerprint lock) without data lost
    HW test - eMMC RO test
    Security repair - IMEI1, IMEI2
    SP unlock ( Unlock Code Reading )
    SP unlock ( Direct Unlock )
    Format FileSystem / Reset settings (Inlude FRP, Privacy and rest user locks)
    Reset FRP lock (Google Reset Protection)
    Reset Privacy Lock
    Repair ExtData
    Flash Erase
    Fix Unknown BaseBand
    Init Preloader
    Forensic: PhoneBook extraction
    Forensic: User Gallery (Photo / Video) extraction
    Read ModemConfiguration file ( BPLGUI )
    Modem ReInit
    FastBoot mode operations

    Most of that features made WorldFirst and Really Working


    - FW Read Engine Revised
    MT6755 FW read supported!
    *FW is complete and as factory one!
    *FW is fully compatible with SPFlashTool
    New types supported
    Brand-Specific improvements
    Files verification improved

    - Extra
    CM2 DACore V2 engine allow reflash and repair completely dead phones ( erased etc. ), DRAM init also supported
    CM2 DACore V2 allow completely reflash, uprgade and repair PMT on damaged phones

    - Andoid 6.x operations revised
    Security repair operations updated
    Forensic and UserData (DataDirect) engine updated
    Forensic speed increased for MT67xx series
    FW reading for A6 devices improved

    Limitations : PatternLock reading and DataProtection lock reading not work due security subsystem change
    Limitations workaround : ResetUserLocks adapted for Android 6 platform, use it instead

    - Service
    PrivacyLock reset improved ( A6 types and new revisions supported ) - WorldFirst!
    UserLocks reset ( Pattern , PIN, Fingerprint , Voice and etc. locks ) supported for Android 6 - WorldFirst!
    eMMC RO test revised
    "FormatFS / ResetSettings" revised - allow also reset "PrivacyLock" on new phones
    Security repair revised

    - Other
    Flash ID database updated
    Some other bugfixes and improvements

  2. #82
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Infinity Chinese Miracle-2 MTK/Mediatek v1.49 - New MTK Factory FW Reader and more

    Infinity Chinese Miracle-2 MTK/Mediatek v1.49 - New MTK Factory FW Reader and more

    - Main
    Core update for support latest v1620 loaders
    Flash ID database updated
    NAND fixes on 16xx loaders line
    MT6589 fixes on 16xx loaders line

    - FW Read Engine Revised
    Engine completely revised
    Now CM2 make exactly the same AS FACTORY one FW !
    CM2 is only tool, which make exactly Firmwares (which not touch or destroy security, vendor data, ota and other phone features)
    Saving additional partitions ( like nvram, proinfo and similar ) now done automatically during FW reading
    Those files compatible with `Write NVRAM` and `ProInfo Tools` features
    Extra files now placed to folder with similar name in main Firmware folder (additional files, HW and rest info)

    `Pack Android Partitions` feature activated
    Allow reduce FW size up to 60 percent !
    Allow ignore problems with `system verification check` on some brands and phone models
    FW, made with CM2 and that option are fully compatible with SPFT!
    Flashing speed for such type can be fast up to 2x times ( depend on target platform )
    SW will automatically detect all partitions, which can be compressed and will compress them

    New types supported , autodetection method improved
    Brand-Specific improvements for Lenovo, Infocus, Huawei and rest `noname`
    Files verification improved

    - UserData
    UserLocks reset locks operation improved additional pinlocks reset)

    - Service
    `Repair Security` operation revised

    - Other
    Flash ID database updated
    NAND operations revised
    Included 80+ new FlashID to DRAM init
    Some other bugfixes and improvements

    Discussion and download links -
    Infinity Chinese Miracle-2 MTK/Mediatek v1.49
    - New MTK Factory FW Reader and more
    http://forum.gsmhosting.com/vbb/f296...-more-2099893/

  3. #83
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Infinity Chinese Miracle-2 SPD/Spreadtrum v1.19 - SPUnlock for new models and more

    Infinity Chinese Miracle-2 SPD/Spreadtrum v1.19 - SPUnlock for new models and more

    SPD SP Platform

    - Flash Engine updated
    Protocol changes and improvements

    - Firmware Reading improved
    New types supported
    Brand-specific improvements
    Automatic NVtype detection improved
    Some other fixes and improvements

    - Service operations improved
    NVM operations revised and improved
    SPUnlock revised, allow unlock all latest SPD Android phones

    - Other
    SVC mode connection revised for some models
    Some improvements and bugfixes at all
    Fixed "SW not start" problem on some PCs

    Discussion and download links -
    Infinity Chinese Miracle-2 SPD/Spreadtrum v1.19 -
    SPUnlock for new models and more

  4. #84
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Infinity Chinese Miracle-2 MTK/Mediatek v1.50 - MTK FP extra features

    Infinity Chinese Miracle-2 MTK/Mediatek v1.50 - MTK FP extra features

    MTK FP extra features

    MTK FP Platform
    - FW Read Engine Revised
    New FW types supported
    NOR EMI settings build fixed for some types

    - Service
    "Repair Security" improved for FP line
    New repair mode : "CM2 : Direct"
    > Allow repair security on all MTK Feature Phones over flash mode
    Support MT625A, MT6260, MT6261
    Support both security types (SF and SD)
    SW automatically detect type and repair security
    Repair up to 4 fields
    "Read/Write NVM" for MT625A, MT6260, MT6261 activated
    > Allow read and write protected NV for SD type phones
    "Identify" operation now show more info for FP phones

    - Other
    SP/FP: Flash ID database updated
    SP: Included 20+ new FlashID to DRAM init
    SP: DataDirect Engine updated
    Some other bugfixes and improvements

    Discussion and download links - Infinity Chinese Miracle-2 MTK/Mediatek v1.50 - MTK FP extra features

  5. #85
    Balkan GSM Team Eprom's Avatar
    Clan br.
    487
    Registrovan
    Dec 2005
    Lokacija
    Srbija,Zemun,Bezanijska 18 service,Bezanijska 21 battery shop
    Godina
    51
    Br. postova
    6.474
    Hvala
    1.243
    Pohvaljen 1.580 puta u 892 postova
    Infinity Chinese Miracle-2 MTK/Mediatek v1.51 - LG Bello, D-Series and more models

    Infinity Chinese Miracle-2 MTK/Mediatek v1.51 - LG Bello, D-Series and more models

    >> Enabled support for the next LG devices:
    D100, D100AR/F/G/J
    D105, D105F
    D107
    D213, D213AR/C/F/N/T
    D335
    D690
    H320
    H500, H500F/G/T

    Supported features:
    Read full info (with extended info)
    Factory FW Read / Write
    FlashDump Read / Write
    NVRAM Read / Write
    Security Read / Write
    UserLocks Reset (Include LG "Knock Code") without data lost
    PatternLock Reading
    HW test - RAM, eMMC, Battery
    Security repair - IMEI1, IMEI2, BTMAC, WiFiMAC
    SP Unlock (Code Reading)
    Format FileSystem
    Repair ExtData
    Flash Erase
    Fix Unknown BaseBand
    Init Preloader
    Memory Repartition
    Forensic: PhoneBook extraction
    Forensic: User Gallery (Photo / Video) extraction

    >> New features for already supported models:
    E440, E440F/G/J
    E445
    E450, E450B/F/G/J
    E451
    E455, E455F/G
    E460, E460F

    Supported features:
    Enabled Read and Write Factory Firmware !

    * Info: On some devices possible get stuck at boot logo
    * Info: Enough make "Format FS" operation on WIPE mode (second option) to fix that

    >> FW Read Engine Revised
    Brand-Specific improvements for Infocus, Wiko, LG and some other brands.
    Files verification improved

    >> UserData
    Feature Phones: MT625A, MT6260, MT6261: PhoneBook reading engine updated
    * Now support ALL SRS (Single Record Structure) phones in AutoDetection mode
    * Support up to 2000 phonebook entries extraction (max count for Feature Phones)

    >> Other
    Flash ID database updated
    Some experimental features enabled
    Some bugfixes and improvements

    Discussion and download links -
    Infinity Chinese Miracle-2 MTK/Mediatek v1.51
    - LG Bello, D-Series and more models

  6. #86
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    Infinity Chinese Miracle-2 MTK/Mediatek v1.52 - LG K4-Series, new models, new feature

    Infinity Chinese Miracle-2 MTK/Mediatek v1.52 - LG K4-Series, new models, new features

    - Main
    Core updated to support latest v1624 flash package
    SP Flash Engine updated
    - Enabled support for unaligned scatter flashing for 67xx series (6755 also supported)
    That allow flashing those factory files on phones with different memory sizes without further problems with user memory

    >> Enabled support for LG K4 line:
    - K120 and K120 model versions ( E/AR/F/GT/H )
    - K130 and K130 model versions ( E )

    - Supported features:
    Read full info (with extended info)
    Factory FW Read / Write
    FlashDump Read / Write
    NVRAM Read / Write
    Security Read / Write
    UserLocks Reset (Include LG "Knock Code") without data lost
    PatternLock Reading
    HW test - RAM, eMMC, Battery
    Security repair - IMEI1, IMEI2, BT-MAC, WiFi-MAC
    SP Unlock (Code Reading)
    Format FileSystem
    Repair ExtData
    Flash Erase
    Fix Unknown BaseBand
    Init Preloader
    Memory Repartition
    Forensic: PhoneBook extraction
    Forensic: User Gallery (Photo / Video) extraction

    - LG Other:
    Improved Flashing Engine
    Fixed problems with security reset during flashing for old E-series models
    Improved Security Repair

    - UserData operations updated
    FP MT62xx: Forensic engine updated, more types supported
    FP MT62xx: PhoneBook extraction revised
    SP: DataDirect Engine updated ( stuck on reading big (2+ GiB) files in some cases fixed )
    SP: PhoneBook extraction revised

    - Factory FW reader updated
    Engine updated
    Brand-specific improvements ( Wiko, Lenovo, LG and many others )
    AutoDetection improved
    MT6755 specific improvements
    Firmware naming during read changed ( if more model-specific info will be found )

    - Service operations improved
    NVRAM operations revised
    NVRAM: Improved verification
    NVRAM: activated NVRAM verification during read
    New FRP type reset supported

    - Other
    For some models now reading more info ( Lenovo, LG and other )
    Flash ID database updated
    False AV warnings/resource blocking should be fixed from now
    AppManager (AV dictionary) updated
    Some fixes and improvements at all

    Discussion and download links - Infinity Chinese Miracle-2 MTK/Mediatek v1.52 - LG K4-Series, new models, new feature

  7. #87
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    Infinity Chinese Miracle-2 SPD/Spreadtrum v1.20 - New models and features

    --------------------------------------------------------------------------------


    Infinity Chinese Miracle-2 SPD/Spreadtrum v1.20 - New models and features

    SPD SP Platform

    - FlashLoader package updated
    SC773x Loaders updated: Generic, Android 5 and Alternative for both mode
    SC5735 Loaders updated, Alternative Loader also activated
    Support for new FL+DRAM types: Latest SC773x, SC9830 models

    - Flash Engine updated
    Some bugfixes and improvements
    PAC files handling improved

    - Firmware Reading improved
    New types supported
    Brand-specific improvements

    - Service operations improved
    Activated HWInfo Read/Write module - WorldFirst
    - Allow read, identify, backup and restore HWinfo data for phones, which use it
    - Symptoms of wrong HWData: blank LCD, not working touch panel etc.
    - Automatic version/info and revision identify during read

    FRP reset improved
    NVM operations improved
    Fix BB option during NV write revised and improved
    Repair security in FlashMode revised
    SPUnlock improved. Note: signed types are not supported yet!

    - Other
    AppMAnager (AV) dictionary updated
    AltLDR option revised for SC9830
    Some improvements and bugfixes at all

  8. #88
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    Infinity Chinese Miracle-2 SPD/Spreadtrum v1.21 - PAC creator, latest phones and more

    --------------------------------------------------------------------------------


    Infinity Chinese Miracle-2 SPD/Spreadtrum v1.21 - PAC creator, latest phones and more !

    SPD SP Platform

    - FlashLoader package updated
    SC773x Loaders updated: Android 6 / C-revision
    SC5735 Loaders updated: Alternative Loader
    Support for new FL+DRAM types: Latest SC773x

    - PAC creator tool introduced
    Allow Convert Infinity PAC.SC firmware to SPRD Factory PAC files!
    Not need read all FW's again, if you need have PAC file - just convert it
    Result PAC contain all need NVM , build and info settings, like factory one!
    Supported CPUs and versions:
    NAND: SC8830,SC7715 - WorldFirst !
    eMMC: SC7715, SC7730, SC7731, SC8830, SC9830, SC5735
    >PAC files fully compatible with SPD Factory loader ( UpgradeDownload / ResearchDownload / FactoryDownload )
    >PAC files fully compatible with CM2SPD
    >PAC files contain all NVM, partitions and etc. data for COMPLETE phone rebuild

    - FW updater tool
    Allow update Infinity PAC.SC files for eMMC phones ( rebuild product-specific partitions )
    Useful for some specific phones, which stuck/not power on after flashing ( if problem on SW side )
    That option update FW files WITHOUT any BAD effect

    - Flash Engine updated
    Changes according R4 revision
    PAC files handling improved

    - Firmware Reading improved
    New types supported
    Brand-specific improvements

    - Service operations improved
    Improved HWInfo Read/Write module
    NAND: During Identify also will be shown FlashIC type and Info ( Block/Page details )
    eMMC/NAND: More release-specific info shown during identify
    NVM operations improved ( 4G devices mostly, BBFix operation improved )

    - Other
    New CPU set activated: SC7730/SC7731 RevC / Android 6 ( AltLDR option also activated )
    Some improvements and bugfixes at all

  9. #89
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    Infinity Chinese Miracle-2 SPD/Spreadtrum v1.22 - Direct FW read for All SPD Android

    --------------------------------------------------------------------------------


    Infinity Chinese Miracle-2 SPD/Spreadtrum v1.22 - Direct FW reader for All SPD Android phones

    SPD SP Platform

    - PAC creator improved
    New types supported
    Improved file verification

    - Firmware Reading improved
    New types supported
    Brand-specific improvements

    Direct FW reader mode activated!
    - DO NOT need USB Debug any more !
    - DO NOT need ROOT for Android 5x and Android 6.x any more !
    - DO NOT need power on phone at all

    The next CPUs are supported:
    SC5735 eMMC
    SC7715 eMMC
    SC7730 eMMC
    SC7731 eMMC
    SC8830 eMMC
    SC9830 eMMC

    Solution DO NOT use any "prepared" loaders or something like that - you can use CM2 builtin loaders or own pac files
    Solution DO NOT use stupidly "plain reading" of knownn partitions - no half-working firmwares and rest problems

    Include NAND Direct FW reading what was released much time ago - CM2 now cover all SC77xx CPU line!
    Complete list of supported platforms for FW Read/Write:
    SC7715 NAND
    SC7715 eMMC
    SC7730/31 eMMC
    SC8830 NAND
    SC8830 eMMC
    SC9830 eMMC
    SC5735 eMMC
    SC6815 eMMC

    - Service operations improved
    NVM operations improved
    SPunlock revised for some models

    - Other
    Some improvements and bugfixes at all

  10. #90
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    Infinity-Box Chinese Miracle-2 MTK/Mediatek v1.57 - New ThetLock, Secure Flash etc

    --------------------------------------------------------------------------------


    Infinity-Box Chinese Miracle-2 MTK/Mediatek v1.57 - New ThetLock, Secure Flash and more

    Mediatek SP Platform:

    - Flash Engine updated
    MT6580, MT6592, MT6595, MT8127: Secure Flash Engine Enabled
    MT6735, MT6753, MT6795, MT2601, MT8163: Secure Flash Engine Enabled
    Secure Flash Engine allow flash Factory Signed firmwares
    > Now CM2 allow flash Signed Scatter firmwares used world-wide and by several specific vendors
    Should be selected correct model in settings and signed FW

    Safe flashing for UNSIGNED Firmwares improved. Note: it still can be dangerous for Secured phones.
    GPT rebuild during improved for Helio line devices (vendor-specific)

    New FlashEngine options:
    Backup: Make backup of device-specific data: HW, main and security blocks
    Skip Preloader Flashing: Ignore HW check ( BaseBand verification NOT ignored ) and not upload preloader
    Features supported for MT65xx, MT67xx and Helio lines

    - Service:
    Direct SP Unlock operation supported for secure devices (MT65xx and MT67xx lines)
    Format FS operation revised
    Privacy Lock reset engine completely rebuild
    - Support ALL existing PL types, including latest ones Helio X/P series! - WorldFirst !
    Operation is completely safe for new Helio SeriesL do not destroy device-specific settings etc.
    Combined PL types also supported
    - Safe Reset (UserData safe) improved, all existing types supported
    - NAND PL reset improved

    - FW reader engine updated
    New types supported
    Brand-specific changes

    - UserData
    UserLocks reset updated for A6 with latest security patches: No stuck/hang after reset
    SafePrivacy reset revised
    DataDirect Engine updated

    - New models included:
    LG X210 ( LG K7 LTE )
    LG X220 ( LG K5 LTE )
    SPUnlock, Repair Security, Reset FRP, Reset Settings, Forensic, UserLocks etc.
    Flashing: Support ONLY Signed Factory Firmwares!
    Do not need anymore hold volume keys etc.

    - Other
    Many other changes and improvements at all

  11. #91
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    Infinity-Box Chinese Miracle-2 MTK/Mediatek v1.58 - New models and features

    Mediatek SP Platform:

    - Flash Engine updated
    MT6572, MT6582: Secure Flash Engine Enabled
    Improved Secure Firmware Flashing support for MT67xx line
    New factory file types supported

    - Service:
    FixDL operation improved
    eMMC ReadOnly test improved
    >Improved testing chaing, verification
    >Enabled support for erased/damaged devices
    In case of erased/damaged phone CM2 can now make forced test
    It still safe and NOT destroy phone firmware

    - Firmware reader engine updated
    New types supported
    Brand-specific changes

    - New models included:
    LG X135
    LG X145
    SPUnlock, Repair Security, Reset Settings, Forensic, UserLocks etc.
    Flashing: Support ONLY Signed Factory Firmwares!
    Do not need anymore hold volume keys etc.
    Firmwares for supported secure phones you can find on support

    - Other
    FlashLoaders package updated
    DRAM Init database updated. More new FlashTypes supported.
    MT6573 and MT6575/MT6577 support has been broken. Fixed.
    Other changes and improvements at all

  12. #92
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    Infinity Chinese Miracle-2 QLM/Qualcomm v1.01 - First Update : Alcatel, new FRP etc.

    --------------------------------------------------------------------------------


    Infinity Chinese Miracle-2 QLM/Qualcomm v1.01 - First Update : Alcatel, new FRP and more

    Supported CPU types:
    Qualcomm MSM 8909 (SnapDragon 210)
    Qualcomm MSM 8916 (SnapDragon 410)

    - MSM8916 loaders package updated, more types supported
    Qmobile, Alcatel, Lenovo, Wileyfox and several other models are supported

    - Read Firmware
    Support for Alcatel devices activated( Android 5/6 )
    Wide range of new types supported ( Lenovo, Qmobile, Acer and other brand-specific )
    Extra Files option enabled
    > Feature force SW to backup device-specific data
    > Useful for COMPLETE restore after flash erase or rebuild
    Firmware NOT damage any device functionality ( Fota etc. )
    Formware NOT damage any security settings in device

    - Write Firmware
    Improved Factory Firmware packages support (RAW)
    Fixed booting issues on some models
    Flashing speed optimized

    - Format FS/Reset Settings
    Reset FRP (Google Reset Protection ) improved ( Android 6 and vendor-specific types )

    - Read PatternLock
    Read improved for Android 5.x series
    Android 6/7 enabled security detection (instead of "PatternLock not set")

    - Other
    Identify operation show more info ( if it exists )
    Error log generation enabled ( just send file to support for add new model or submit problem )
    Some other bugfixes and improvements

  13. #93
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    Infinity Chinese Miracle-2 QLM/Qualcomm v1.02 - MSM8210, MSM8610, Nokia X2 and more !

    --------------------------------------------------------------------------------


    Infinity Chinese Miracle-2 QLM/Qualcomm v1.02 - MSM8210, MSM8610, Nokia X2 and more !

    Supported CPU types:
    Qualcomm MSM 8210 (SnapDragon 200)
    Qualcomm MSM 8610 (SnapDragon 200)
    Qualcomm MSM 8909 (SnapDragon 210)
    Qualcomm MSM 8916 (SnapDragon 410)

    - MSM8916 loaders package updated, more types supported
    More Alcatel, Lenovo and other models are supported

    - MSM8210 support activated!
    Support wide range of generic MSM8210 phones
    > Identify
    > Read Firmware ( Infinity )
    > Read Firmware ( Factory RAW )
    > Write Firmware ( Infinity )
    > Write Firmware ( Factory RAW )
    > Read PatternLock ( Android 4.x/5.x )
    > Format FileSystem
    > Reset FRP ( Google Reset Protection )

    - MSM8610 support activated!
    Support wide range of generic MSM8610 phones
    > Identify
    > Read Firmware ( Infinity )
    > Read Firmware ( Factory RAW )
    > Write Firmware ( Infinity )
    > Write Firmware ( Factory RAW )
    > Read PatternLock ( Android 4.x/5.x )
    > Format FileSystem
    > Reset FRP ( Google Reset Protection )

    - Read Firmware
    Wide range of new types supported ( Generic and brand-specific )
    More different security types will backup on "ExtraFiles" option enabled

    CM2 Firmware NOT damage any device functionality ( Fota etc. )
    CM2 Formware NOT damage any security settings in device

    - Write Firmware
    Improved Factory Firmware packages support (RAW)
    Firmware verification improved
    Improved MSM8916 flashing ( old firmware types )

    - Format FS/Reset Settings
    Reset FRP (Google Reset Protection ) improved ( vendor-specific types )

    - Other
    Stop button activated
    Some other bugfixes and improvements
    Nokia X2 support activated ( Read/Write/Format/Identify ) - just for fun

  14. #94
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    Infinity Chinese Miracle-2 SPD/Spreadtrum v1.23 - New models and improvements

    --------------------------------------------------------------------------------


    Infinity Chinese Miracle-2 SPD/Spreadtrum v1.23 - New models and improvements

    SPD SP Platform

    - Loaders updated
    SC7715 NAND AltLDR option activated
    Latest SC7731c SLDR included ( models folder )

    - PAC creator improved
    New types supported
    Improved file verification

    - Firmware Reading improved
    New types supported
    Brand-specific improvements

    - Direct FW reader updated
    Reading simplified (do not need to reset power etc. - for embded battery devices )
    Reading speed improved
    Other minor changes

    - Service operations improved
    NVM operations improved
    SPunlock engine updated ( SC7731c and SC9830 )

    - Other
    Connection stuck updated
    Some improvements and bugfixes at all
    Minor GUI changes


    http://www.indishare.me/il9zmmoxo1hu

  15. #95
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    Infinity Chinese Miracle-2 SPD/Spreadtrum v1.24 - SC7731c and more features

    Infinity Chinese Miracle-2 SPD/Spreadtrum v1.24 - SC7731c and more features

    SPD SP Platform

    - Main
    Improved booting
    Fixed latest SPD drivers support
    Flash engine updated
    SC7731c support revised. Wide range of devices supported now.

    - PAC creator improved
    New types supported

    - Service operations improved
    HWInfo tool improved : supported new types
    FRP reset improved : supported new types
    NVM operations improved
    Repair Security over flash mode improved
    > Info : Some Android 6 devices can clear userdata after repair!

    - Other
    Some improvements and bugfixes at all

  16. #96
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    Infinity Chinese Miracle-2 QLM/Qualcomm v1.04 - MSM8626,MSM8926, UserLocks Reset etc

    --------------------------------------------------------------------------------


    Infinity Chinese Miracle-2 QLM/Qualcomm v1.04 - MSM8626,MSM8926, UserLocks Reset and more

    Supported CPU types:

    Qualcomm MSM 8210 (SnapDragon 200)
    Qualcomm MSM 8212 (SnapDragon 200)
    Qualcomm MSM 8610 (SnapDragon 200)
    Qualcomm MSM 8612 (SnapDragon 200)
    Qualcomm MSM 8626 (SnapDragon 400)
    Qualcomm MSM 8909 (SnapDragon 210)
    Qualcomm MSM 8916 (SnapDragon 410)
    Qualcomm MSM 8926 (SnapDragon 400)

    - MSM8916 loaders package updated, more types supported
    - MSM8909 loaders package updated, more types supported

    More New models supported:
    Alcatel ( MSM8909 and MSM8916 )
    Lenovo ( MSM8926 and MSM8909 )
    And some others models are supported !

    - MSM8626 support activated !
    Support wide range of generic MSM8626 phones
    > Identify
    > Read Firmware ( Infinity )
    > Write Firmware ( Factory RAW )
    > Write Firmware ( Infinity )
    > Read PatternLock ( Android 4.x/5.x )
    > Format FileSystem
    > Reset FRP ( Google Reset Protection )
    > Reset UserLocks

    - MSM8926 support activated !
    Support wide range of generic MSM8926 phones
    > Identify
    > Read Firmware ( Infinity )
    > Write Firmware ( Infinity )
    > Write Firmware ( Factory RAW )
    > Read PatternLock ( Android 4.x/5.x )
    > Format FileSystem
    > Reset FRP ( Google Reset Protection )
    > Reset UserLocks

    - Main
    FH Protocol updated
    Fixed and improved support for all operations with some old devices (8x10/8x12/8916)

    - UserData
    PatternLock reading revised
    Reset All UserLocks feature activated - Unique!
    > Allow erase ALL userlocks ( PIN/PASSWORD/FACELOCK/VOICELOCK/PATTERNLOCK etc. ) WITHOUT any byte of userdata lost !
    > Support ALL ANDROID versions ! ( from 4.x to latest 6.x )
    > Feature is safe and NOT destroy any phone user-side secuirty functions
    > Known limitations : not work yet with Xiaomi devices ( bootloop ) !!!

    - Read Firmware
    Wide range of new types supported ( Generic and brand-specific )
    More different security types will backup on "ExtraFiles" option enabled

    CM2 Firmware NOT damage any device functionality ( Fota etc. )
    CM2 Formware NOT damage any security settings in device

    - Write Firmware
    Improved Factory Firmware packages support (RAW)

    - Service
    FRP Reset improved

    - Other
    Some other bugfixes and improvements
    GUI changes, UserData tab activated

  17. #97
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    Infinity Chinese Miracle-2 Qualcomm v1.06 - SD 415/30/610/15/50/52/801, Xiaomi etc.

    Infinity Chinese Miracle-2 QLM/Qualcomm v1.06 - SD 415/30/610/15/50/52/801, Forensic, Xiaomi

    List of supported CPU:
    Qualcomm MSM 8210 (SnapDragon 200)
    Qualcomm MSM 8212 (SnapDragon 200)
    Qualcomm MSM 8610 (SnapDragon 200)
    Qualcomm MSM 8612 (SnapDragon 200)
    Qualcomm MSM 8626 (SnapDragon 400)
    Qualcomm MSM 8909 (SnapDragon 210)
    Qualcomm MSM 8916 (SnapDragon 410)
    Qualcomm MSM 8926 (SnapDragon 400)
    Qualcomm MSM 8929 (SnapDragon 415)
    Qualcomm MSM 8936 (SnapDragon 610)
    Qualcomm MSM 8937 (SnapDragon 430)
    Qualcomm MSM 8939 (SnapDragon 615)
    Qualcomm MSM 8974 (SnapDragon 801)
    Qualcomm MSM 8952 (SnapDragon 650)
    Qualcomm MSM 8976 (SnapDragon 652)

    *New CPU line activated:
    SnapDragon 415: Generic, Lenovo, Infinix and others
    SnapDragon 430: Generic, Xiaomi, Lenovo and others
    SnapDragon 610: Generic, Lenovo and others
    SnapDragon 615: Generic, Lenovo and others
    SnapDragon 650: Generic, Xiaomi and others
    SnapDragon 652: Generic, Xiaomi, Vivo, Alcatel and others
    SnapDragon 801: Generic, Vivo, Lenovo, OnePlus and others

    *Main
    FH Protocol updated, more platform types supported
    Fixed support for some Secure devices (WileyFox,Lenovo)
    MSM8909: Updated support for wide range of new devices - Alcatel, ZTE etc.
    MSM8916: Updated support for wide range of new devices - Alcatel, Asus etc.
    MSM8x10: Updated support for new devices
    MSM8926: Updated support for new devices
    MSM8929: Updated support for new devices
    Improved FW Read/Write speed


    *New CPU support activated:
    Qualcomm MSM8929 (Generic and Secure types)
    Qualcomm MSM8936 (Generic and Secure types)
    Qualcomm MSM8937 (Generic and Secure types)
    Qualcomm MSM8952 (Generic and Secure types)
    Qualcomm MSM8974 (Generic and Secure types)
    Qualcomm MSM8976 (Generic and Secure types)

    Supported features:
    > Identify
    > Read Firmware ( Infinity )
    > Write Firmware ( Infinity )
    > Write Firmware ( Factory RAW )
    > Read PatternLock ( Android 4.x/5.x )
    > Format FileSystem
    > Reset UserLocks
    > Forensic (PhoneBook Extraction)
    > Reset FRP ( Google Reset Protection )


    *FW reader engine updated
    Over 100+ new types supported
    Brand-specific changes and improvements
    File naming revised
    Verification improved

    Unlike other "solutions", CM2 make FIRMWARE, not a stupid plain dump
    That mean all device unique data, security etc. will remain safe after flashing

    *Forensic engine activated!
    Allow extract phonebook directly from device
    New PhoneBook extraction engine activated!
    Unlike existing one, used in CM2 modules, new engine allow:
    1. MORE data extraction
    2. DELETED records extraction
    3. Support ALMOST ALL CONTACT DATA extraction ( all numbers, messengers details, personal info etc. )
    4. FULL UNICODE support ( all local/native specific symbols and etc will shown correctly )

    NEW EXPORT engine:
    > allow export data in HTML format ( template can be edited by user needs )
    > allow export vcf in common format, compatible with most native android CP or phone managers
    > Export support unicode as well

    *UserLocks reset engine updated
    - Cyanogen support enabled (device do not stuck after reset), with all it extensions
    - Big data storage support improved (64-128 GiB)

    *Activated Xiaomi line support:
    Read/Write Firmware
    Read PatternLock
    Reset Settings
    Reset FRP
    Forensic
    Remove MI Account (under test)

    *Service operations:
    Extended Flash IC details info for some platforms activated (Vendor, Name)
    New "Format FS" mode: Reset MI Account (may not work on some models)
    New "Format FS" mode: Forced Fix (useful for devices like Mi MAX and similar)
    New FRP Types supported

    - FW reader engine updated
    New types supported
    Report.log creation fixed
    Verification improved

    *Other
    - Module has been re-written from scratch. More stable, faster and better
    - Fixed issues on different system locales
    - Some other improvements and fixes

    Unlike other "solutions" CM2 make FIRMWARE but not a useless plain dump
    That mean all device unique data, security etc. will remain safe after flashing

  18. #98
    GSM Expert steva's Avatar
    Clan br.
    27
    Registrovan
    Sep 2005
    Lokacija
    Лазаревац
    Godina
    44
    Br. postova
    1.576
    Hvala
    77
    Pohvaljen 150 puta u 121 postova
    Infinity Chinese Miracle-2 QLM/Qualcomm v1.09 - SD 625/MSM8953, MemoryTool and more

    --------------------------------------------------------------------------------


    Infinity Chinese Miracle-2 QLM/Qualcomm v1.09 - SD 625/MSM8953, MemoryTool and more

    *New CPU line activated:
    SnapDragon 625: Generic, Xiaomi, Lenovo and other devices

    Supported CPU List:
    Qualcomm MSM 8210 (SnapDragon 200)
    Qualcomm MSM 8212 (SnapDragon 200)
    Qualcomm MSM 8610 (SnapDragon 200)
    Qualcomm MSM 8612 (SnapDragon 200)
    Qualcomm MSM 8226 (SnapDragon 400)
    Qualcomm MSM 8626 (SnapDragon 400)
    Qualcomm MSM 8x28 (SnapDragon 400)
    Qualcomm APQ 8009 (SnapDragon 210)
    Qualcomm MSM 8909 (SnapDragon 210)
    Qualcomm MSM 8909 (SnapDragon 210)
    Qualcomm MSM 8916 (SnapDragon 410)
    Qualcomm MSM 8917 (SnapDragon 425)
    Qualcomm MSM 8926 (SnapDragon 400)
    Qualcomm MSM 8929 (SnapDragon 415)
    Qualcomm MSM 8936 (SnapDragon 610)
    Qualcomm MSM 8937 (SnapDragon 430)
    Qualcomm MSM 8939 (SnapDragon 615)
    Qualcomm MSM 8974 (SnapDragon 801)
    Qualcomm MSM 8952 (SnapDragon 650)
    Qualcomm MSM 8953 (SnapDragon 625)
    Qualcomm MSM 8976 (SnapDragon 652)
    Qualcomm MSM 8994 (SnapDragon 810)

    *Main
    FH Protocol updated and more platform types supported
    MSM8909: Updated support for wide range of new devices
    MSM8916: Updated support for wide range of new devices
    MSM8936: Updated support for wide range of new devices
    MSM8929: Updated support for range of new devices
    MSM8953: Support Generic, Lenovo, Xiaomi and other devices
    MSM8x2x: updated list of supported sub-types and more models supported

    *MemoryTool introduced
    Ultimate tool for custom flashing, modding, forensic and others operations!
    Allow work with device memory for:
    > Read any memory Region
    > Write any memory Region
    > Partial/Customize Flashing
    Support binary, factory, sparsed and other files
    Session mode: Connect device once and make any operation what you want without re-connect
    Memory Test: Test memory for ReadOnly


    *New CPU support activated:
    Qualcomm MSM8953 (Generic and Secure types)

    Supported features:
    > Identify
    > Read Firmware ( Infinity )
    > Write Firmware ( Infinity )
    > Write Firmware ( Factory RAW )
    > Read PatternLock ( Android 4.x/5.x )
    > Format FileSystem
    > Reset UserLocks
    > Forensic (PhoneBook Extraction)
    > Reset FRP ( Google Reset Protection )

    *FW reader engine updated
    New types supported
    Brand-specific changes and improvements

    -> Unlike other "solutions", CM2 make FIRMWARE, NOT A STUPID PLAIN DUMP ( i.e. cloning )
    -> That means all device unique data, security etc. will remain safe after flashing!

    *Service operations:
    "Format FS" mode: Reset MI Account improved
    FastBoot -> EDL forcer activated (Extra -> EDL Boot) may not work for some models

    *Other
    Some missed Xiaomi models added in list of supported
    Some other improvements and fixes


    IOS DHRU API with Infinity Avtivations/Credits enabled

  19. #99
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova
    Chinese Miracle-2 MTK/Mediatek v2.00 r2 - MT6739 support, SPUnlock and more

    As we told earlier, it was found some kind of problems with v2.00 at some PC and some hardware configuration. Current release should help to fix it. More details please see here - http://forum.gsmhosting.com/vbb/f296...tions-2386273/

    More details about current release:

    - Main
    MT6739 CPU supported!
    MT6739 moved from TEST to GENERAL support.
    Firmwware read
    Firmware write
    NVRAM read
    NVRAM write
    Reset Settings / Format FS
    Reset FRP
    Reset Privacy
    MemoryTool

    - MemoryTool
    Fixed PMT init on some devices
    Optimized Expand/Collapse view functions
    Fixed DA1804 and DA1712 loaders support for WIPE
    Optimized NAND support

    - Service
    NVRAM module updated
    .dynamic page detection
    .some types support fixed
    .repair security ( security type detection ) updated
    FormatFS / Reset settings rebuild
    .Activated fully automatic "FULL FACTORY" mode, designed for all modern devices ( include devices with SEC_CONTROL )
    ."FULL FACTORY" mode set to default
    .Some "OLD" agents (DA15xx) may not work

    - SP Unlock activated
    Support all MTK modern phones, except MT6763 and MT6739.
    Read codes and Direct Unlock mode supported
    MT6570 eMMC ONLY devices supported

    - Core
    Fixed memory leak issues and problems with booting on some systems
    Optimized different OLD agents support for MODERN devices ( DA16xx and DA17xx line )
    SW more faster now
    EMI handler for MT6570 and MT6797 fully automated and complete
    Improved EMI lookup support for MT675x devices
    EMIDB updated
    Hint/Error explain module updated
    MT6758 support under test
    MT6771 support under test

    - Flasher
    Fixed break issue, when just one file selected for flashing.
    HWInfo compatibility status shown in log in both cases ( succes or failed )

    - FW reader
    MT6739 support
    New types of firmwares supported
    Optimized NAND reading on DA18xx line loaders
    Read Firmware size now shown in log

    - New models included
    Limited MEIZU support
    Limited Oppo support
    Limited Gionee support
    Limited BQ support
    Some basic "generic" secure devices support optimized


    Known issues/warnings/info :
    1. [NAND on MT6570] v1712,v1736 loader packages NOT SHOULD BE USED! Since they have ftl/ecc errors!
    In result you will give read/write FW errors and rest problems at all.
    Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
    2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
    3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal and cannot be fixed.
    Read-Write data, which you want, ignore "EMPTY" states.
    4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
    5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
    6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
    7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!


    Download link


    Upload file to Support

    Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News

  20. #100
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova
    Infinity Chinese Miracle-2 MTK/Mediatek v2.00 r4 - MT6771 support and other features !

    - Main
    Connection level revised
    BROM level support optimized

    MT6771 CPU supported!
    MT6771 moved from TEST to GENERAL support.
    Firmwware read
    Firmware write
    NVRAM read
    NVRAM write
    Reset Settings / Format FS
    Reset FRP
    Reset Privacy
    MemoryTool

    - Service
    Repair Security revised. Fixed issues with some NV types.

    - Core
    EMIDB updated
    Hint/Error explain module updated
    MT6758 support under test
    MT6765 support under test

    - FW reader
    MT6771 supported
    New types of firmwares supported
    Scatter creation optimized

    - SP Unlock
    Revised unlock support for some models
    Info: MT6739/MT6763/MT6771 IS NOT supported YET!

    - New models included
    Limited Oppo support (F7/A3)
    Limited Vivo support
    And diffirent other models
    Some other basic "generic" secure devices support optimized

    Known issues/warnings/info:
    1. [NAND on MT6570] v1712, v1736 loader packages SHOULD NOT BE USED due to these packages have ftl/ecc errors!
    In result you will give read/write FW errors and rest problems at all.
    Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
    2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
    3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal behaviour and can not be fixed.
    Read-Write data, which you want, ignore "EMPTY" states.
    4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
    5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
    6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
    7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!
    8. [NAND on MT6570] In some cases device MAY DEAD after flashing! Make sure you have TESTED firmware version!
    If you have download FW from internet/other source - make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE!!!
    Preloader info shown now during FW load.

    Credits :
    kamal_singla - testing and useful files contribution


    Important:
    - Software installed to new folder /CM2MT2/ and designed to support new models
    - Smart-Card firmware v0136 is Ok to use this version
    - DO NOT uninstall previous version 1.58 ! If you are trying to connect phone with new software and see a message like LEGACY MTK you should use version 1.58 for this device !




    Download link


    Upload file to Support

    Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News

  21. #101
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova
    Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features


    Supported CPU list:
    Spreadtrum: SC6530, SC6531, SC6531(A/C), SC6531E, SC6533, SC6533G
    RDA Mirco: RDA8851 rev A,B,C,L,CL
    RDA Micro: RDA8826

    RDA Mirco RDA8851 rev A,B,C,L,CL/RDA8826
    Flashing protocol updated
    Updated LOD tools ( flashing / customizing )

    Spreadtrum SC6533/G:
    Protocol updated
    Support for REV2 bootrom mode activated
    FW reading revised
    Updated LOD tools ( flashing / customizing )

    Spreadtrum SC6530/6531/A/C/E:
    Revised Repair security feature
    Flashing revised
    -> Activated "Format FFS" during BINARY dump writing
    -> Use that feature, if device not allow make direct format ( some C/E revision devices )
    User code read revised - activated 2nd mode : from DUMP
    -> Press and hold LEFT SHIFT key, while starting ReadUsercode code operation. Select desired dump file to read code.
    Activated AUTO fixer for memory dumps
    Internal loaders updated

    Spreadtrum other:
    Protocol updated
    PAC handling revised
    Improved Flashing procedure for SC7701/SC7702 devices
    Improved Flashing procedure for SC6825/SC8825 devices

    Known issues[*]/warnings[!]/info[I]:
    1. [I] AUTO fixer for memory dumps
    -> That feature will AUTOMATICALLY FIX dumps from devices with "abnormal" flash and memory layout ( issue found on number of devices 16MB flash with 8MB layout )
    -> Just select binary dump in flashing tab or any other operation, which require file select.
    2. [*] In some cases Format FFS may fail on E and C rev
    -> Read Flash Dump, write it back. During Dump writing SW will ask you about FormatFFS.






    Download link


    Upload file to Support

    Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News

  22. #102
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova
    Infinity `SM` software v2.00 released

    Infinity Samsung Activation server is back with new Smart-Card firmware for latest `SM` software release.
    `SM` software v1.xx was released time ago as a free software for Infinity users. From now v2.00 released as a paid addon.
    Users who have made free Infinity `SM` activation can use it in future with `SM` software v1.xx. If users of free `SM` Activation want to use `SM` software v2.xx they should obtain new `SM` activation.

    Infinity `SM` software v2.00 news:
    - many internal stability improvements
    - FRP unlock engine re-written
    - FRP unlock procedure updated
    - security area write for MTK based devices
    - security area write for Exynos based devices
    - Smart-Card firmware should be updated to use this software release
    - "SM ResourcePack" should be installed to get all released functions working

    At the moment there is a special offer for `SM` v2.xx Activation. Price is quite cheap right now but with each new `SM` update released price will be higher than before. So you can activate software right now for a cheap price or you can wait some time, see software updates progress and then pay higher price for it.


    Download link


    Upload file to Support

    Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News

  23. #103
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova
    Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features


    Supported CPU list:
    Spreadtrum: SC6530, SC6531, SC6531(A/C), SC6531E, SC6533, SC6533G
    RDA Mirco: RDA8851 rev A,B,C,L,CL
    RDA Micro: RDA8826

    RDA Mirco RDA8851 rev A,B,C,L,CL/RDA8826
    Flashing protocol updated
    Updated LOD tools ( flashing / customizing )

    Spreadtrum SC6533/G:
    Protocol updated
    Support for REV2 bootrom mode activated
    FW reading revised
    Updated LOD tools ( flashing / customizing )

    Spreadtrum SC6530/6531/A/C/E:
    Revised Repair security feature
    Flashing revised
    -> Activated "Format FFS" during BINARY dump writing
    -> Use that feature, if device not allow make direct format ( some C/E revision devices )
    User code read revised - activated 2nd mode : from DUMP
    -> Press and hold LEFT SHIFT key, while starting ReadUsercode code operation. Select desired dump file to read code.
    Activated AUTO fixer for memory dumps
    Internal loaders updated

    Spreadtrum other:
    Protocol updated
    PAC handling revised
    Improved Flashing procedure for SC7701/SC7702 devices
    Improved Flashing procedure for SC6825/SC8825 devices

    Known issues[*]/warnings[!]/info[I]:
    1. [I] AUTO fixer for memory dumps
    -> That feature will AUTOMATICALLY FIX dumps from devices with "abnormal" flash and memory layout ( issue found on number of devices 16MB flash with 8MB layout )
    -> Just select binary dump in flashing tab or any other operation, which require file select.
    2. [*] In some cases Format FFS may fail on E and C rev
    -> Read Flash Dump, write it back. During Dump writing SW will ask you about FormatFFS.






    Download link


    Upload file to Support

    Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News

  24. #104
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova
    Infinity `SM` software v2.01 released


    - Service - add `Read Log` option for unlock Exynos phones via server
    - some bug fixed


    More information about software and activation process is here - https://www.infinity-box.com/support/?r=100034
    Information about supported models and functions - https://www.infinity-box.com/support/?r=100035
    Test reports - https://www.infinity-box.com/support/?r=100009



    Download link


    Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News

  25. #105
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova
    Infinity `SM` software v2.02 released

    Service changes:
    - Downgrade modem procedure released. This operation may be dangerus so use at own risk and only if you are really know you need it !
    - rebuild Reset FRP procedure
    Internal changse:
    - a lot of changes related to use server functions
    - bug fixes and internal improvements





    Download link


    Upload file to Support

    Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News

  26. #106
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova
    Infinity `SM` software v2.00 released

    Infinity Samsung Activation server is back with new Smart-Card firmware for latest `SM` software release.
    `SM` software v1.xx was released time ago as a free software for Infinity users. From now v2.00 released as a paid addon.
    Users who have made free Infinity `SM` activation can use it in future with `SM` software v1.xx. If users of free `SM` Activation want to use `SM` software v2.xx they should obtain new `SM` activation.

    Infinity `SM` software v2.00 news:
    - many internal stability improvements
    - FRP unlock engine re-written
    - FRP unlock procedure updated
    - security area write for MTK based devices
    - security area write for Exynos based devices
    - Smart-Card firmware should be updated to use this software release
    - "SM ResourcePack" should be installed to get all released functions working

    At the moment there is a special offer for `SM` v2.xx Activation. Price is quite cheap right now but with each new `SM` update released price will be higher than before. So you can activate software right now for a cheap price or you can wait some time, see software updates progress and then pay higher price for it.

    Latest released version: 2.03
    Curent price: 70 Infinity credits


    List of supported models and features for previous software release - http://forum.gsmhosting.com/vbb/f296...s-etc-2359263/
    Test reports are here - http://forum.gsmhosting.com/vbb/f296...tware-2412992/


    Download link


    Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News

  27. #107
    Product Suporter cezar's Avatar
    Clan br.
    11855
    Registrovan
    Mar 2007
    Lokacija
    REPUBLIKA SRPSKA
    Br. postova
    1.523
    Hvala
    44
    Pohvaljen 205 puta u 130 postova
    Infinity `SM` software v2.04 released

    Infinity `SM` software v2.04 released

    Flasing - add Reset userlock / pin / pattern / password in FRP ON + OEM ON mode options
    Many bug fixed

    How to use Reset User lock options:
    - see phone version in Recovery menu
    - download COMBINATION file according to the phone version
    - check checkbox and add your COMBINATION file
    - flash phone
    - after write COMBINATION file wait phone is turned on
    - phone on in recovery mode, reboot phone
    - you have access to phone data
    after backup user data - reflash phone

  28. #108
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova
    Infinity Chinese Miracle-2 MTK/Mediatek v2.01 - LEGACY support and other features

    Important:
    - Software installed to new folder /CM2MT2/ and designed to support new models

    Legacy core support activated:
    MT6571
    MT6572
    MT6580
    MT6582
    MT6589
    MT6592
    MT6595
    MT6597
    MT6732
    MT6735
    MT6737
    MT6752
    MT6753
    MT6795
    MT8127
    MT8163
    MT8321
    MT8732
    MT8735
    MT8752

    Identify: full device info, security info
    Flash Factory Firmware
    Read Factory Firmware
    Reset Settings / Format FS
    Reset FRP
    Repair Security (Flash Mode, Direct)
    SP unlock
    MemoryTool - complete device control, service, repair, forensic etc.

    - Main
    Loader database optimized, size reduced.
    DA v1820 line support tested and activated
    DA v1836 line support tested and activated
    Connection level revised
    BROM level support optimized
    Optimized and changed HighSpeed port selection
    FlashEngine revised
    NVRAM tool revised
    Global option PWM - allow switch SW between two different work modes for RAPHAEL.
    > Use second one if first mode give errors at writing f.e. restore NVRAM on F5 like device etc.
    > For LEGACY phone it used in MEMORY TOOL ( WRITE / WIPE )

    - Service
    Repair Security revised
    > Old LEGACY types require FORMAT FS/FACTORY RESET for accept changes !
    Format FS - new mode activated: Forced Erase
    Format FS - fixed WIPE mode

    - Core
    EMIDB updated
    New EMI engine for LEGACY line
    > EMI engine support almost all existing LEGACY line
    > New types for RAPHAEL included

    - FW reader
    LEGACY core supported ( unsigned and static signed types are supported )
    New types of firmwares supported
    Scatter creation optimized

    - Other
    Settings tab activated ( firmware path settings and other features can be found here )
    AutoUpdate ( module files ) feature activated

    Many other changes and fixes

    Known issues/warnings/info:
    1. FileSystem flashing on some SBC-enabled RAPHAEL devices (except SYSTEM/CACHE/USER) may fail ! Solution - exclude them from flashing list.
    2. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list !
    3. MT6589 supported ONLY up to DAv17xx line, after DAv1728 support has been removed.
    4. MT6592 support on DAv18xx loader line broken ( DA issue )
    5. EMI/DRAM init module in LEGACY line is almost auto, but in some case require CHANGE EMI setting, if used internal DB ( since much RAMsize/Revision of eMMC/eMCP )
    6. MOST of LEGACY phone can be booted via BROM mode from now ( PLAIN, PRL, SBC )
    7. NAND support on LEGACY line is not activated yet


    Download link


    Subscribe to Telegram channel and get news faster !


    How to upload files to support

    Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News

  29. #109
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova
    Infinity Chinese Miracle-2 MTK/Mediatek v2.02 - new features, loaders, improvements

    - Base
    Base - Read info from EMI base (preloader) in manual mode after selection
    Base - Info reading improved ( in some cases device info can be empty )
    Base - Manual mode selection revised ( Boot fail issues in manual mode )

    - MemoryTool
    MemTool - Partition types detection improved
    MemTool - Interface changes ( partition selection style changed, menu sctructure changed )
    MemTool - work with boot1/boot2 section revised for LEGACY line
    MemTool - InitPreloader option activated ( LEGACY/RAPHAEL )
    MemTool - Flash service regions read/write now allowed ( if they not set as protected - i.e. OTP )

    - Flasher
    Flasher - Removed "Skip preloader" option, use selection instead ( untick preloader from flashing list )
    Flasher - Customization model revised
    Flasher - DL Fix / ADL Checksum revised
    Flasher - Preloader initialization during flashing revised
    Flasher - More accurate PMT/GPT rebuild, for compatibility with SPFT ( PMT invalid issues after servicing with MT2 module )

    - Firmware Reader
    FWReader - Scatter compatibility for spft optimized (6735, 6737)
    FWReader - More types supported for safe read
    FWReader - Info reading improved ( in some cases device info can be empty )
    FWReader - SW path settings also accepted now on FW read

    - Platform changes
    Platform - MT6589 support optimized
    Platform - MT6592 support optimized
    Platform - MT673x support optimized

    - Loader database
    LoaderDB - New agents included ( BQ, TECNO, INFINIX, VIVO )

    - Other
    Other - Lot of small fixes and changes, reported by users


    Download link


    How to upload files to support

    Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News

  30. #110
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova
    Infinity Samsung `SM` v2.05 released



    Service: added new version of Reset FRP procedure (without user-data lost)

    How to use: check "new" checkbox and follow instructions







    Download link

  31. #111
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova
    Infinity Samsung `SM` v2.06 released

    Flashing: added support for lz4 partitions flashing
    System: AutoReadInfo procedure removed to make connection more stable and faster
    Minor bugs fixed

    https://www.infinity-box.com/support/?r=100060


    Infinity Samsung `SM` software activation price is 85 credits from today due to `SM` v2.06 released

  32. #112
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova
    Infinity Chinese Miracle-2 MTK/Mediatek v2.04 - New chips support and new features activated

    Base:
    Base - MT6761 support activated
    Base - MT6765 support activated
    Base - MT6771 support activated
    Base - Secure boot - ARB verification during boot ( via BROM logging )
    Base - Secure boot - SLA challenge state verify ( pass-trought file or nonce challenge )

    FWFlasher:
    FWFlasher - Some ancient secure devices flashing optimized ( early 6572 and similar )
    FWFlasher - MT6753/MT6752 flashing revized
    FWFlasher - Pre-flash backup option enabled
    FWFlasher - Flash core updated

    FWReader:
    FWReader - More accurate FW verification for signed types ( issues after FOTA "garbaging" )
    FWReader - ARB state and version, if present ARB bit
    FWReader - AVB state and version, if present AVB secure mechanism
    FWReader - FW logging info - if SW show it during load - make sure device contain SAME or LOWER version!
    FWReader - More types supported for safe read
    FWReader - Info reading improved

    Service:
    Service - Security repair revised ( NVRAM verify and some "old" types support )
    Service - "Repair BaseBand" option activated
    Service - Format FS revised
    Service - NVRAM module updated

    MemoryTool:
    MemTool - Improved work with partitions on LEGACY line
    MemTool - Wipe operation optimized ( def and adr mode )

    Platform:
    Platform - MT6761 support activated [ Under test ]
    Platform - MT6771 support activated
    Platform - MT6765 support activated
    Platform - MT6753 support optimized
    Platform - MT8172 support optimized
    Platform - MT8176 support optimized
    Platform - MT8163 support optimized
    Platform - MT8127 support optimized

    Loaders:
    LoaderDB - New agents included ( Moto, Huawei, ZTE, Asus and others )

    Other:
    Other - Lot of different small changes and fixes
    Other - BootHelper updated
    Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
    Other - EMI Module updated - MT6765/MT6771/MT8176/MT8172/MT8173/MT6753 supported
    Other - Automatic backup during Identify and critical operations ( list can be tuned via edit settings.ini )
    Other - Partial LEGACY NAND support ( complete boot/verify ) for testing purposes for now - MT6580, MT81xx series
    Other - All settings ( except FLASH tab and Platform Settings group ) now saved/load automatically

    Many thanks to: bRkA, gracy_elec and other our users for providing files and/or testing



    Download link



    - How to upload files to support
    - Read Infinity News

    Infinity-Box 14 years (2005 - 2019) updates and support as nobody else !

  33. #113
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova

    Infinity Chinese Miracle-2 MTK/Mediatek v2.05

    Infinity Chinese Miracle-2 MTK/Mediatek v2.05 - New models and features

    Base:
    Base - Secure boot - ARB verification revised for some secure configs and chips

    FWFlasher:
    FWFlasher - Flash core updated
    FWFlasher - SecureFlash on Legacy phones revised ( SECCFG options and other issues fixed )
    FWFlasher - MT6753/MT6752 flashing revised

    FWReader:
    FWReader - More accurate type detection on LEGACY lines
    FWReader - More types supported for safe read
    FWReader - Info reading improved

    Service:
    Service - "SimLock Reset" option activated - used to rollback all LockSettings to default
    Service - Format FS revised
    Service - Repair BB revised
    Service - NVRAM module updated

    Platform:
    Platform - MT6771 support optimized
    Platform - MT6753 support optimized
    Platform - MT8127 support optimized

    Loaders:
    LoaderDB - Lot of new agents included (Alcatel, Moto, Lava and others)

    Other:
    Other - Many different small changes and fixes
    Other - Some kind of GUI changes for better user expirience
    Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
    Other - EMI Module updated
    Other - Preloader tools, Preloader init and other related stuff updated
    Other - Scatter handling optimized for some vendor-specific stuff
    Other - Automatic backup revised (manual tuneup fix)
    Other - Partial LEGACY NAND support (complete boot/verify) - Identify option works now on some devices

    Info:
    Info: Alcatel support for NEW line devices restricted by PRELOADER level ONLY! Some partitions are PROTECTED! BROM mode not supported for now ( due remote SLA )
    Info: LEGACY secure flashing now pass at any base settings but IN SOME RARE CASES (like Huawei and similar) it may lead to BaseBand and other problems.
    Solution - REFLASH using CORRECT DA!
    Info: ARB nowdays appearing on more devices, make sure about you FLASH SAME version. (Identify ARB LOG and SW load LOG ) Not upgrade to newer ones, if need make some extend service etc. !


    Credits: Many thanks to kamal_singla, gracy_elec and other our users for providing files and/or testing and for other kind help !



    Download link



    - How to upload files to support

    Infinity-Box 14 years (2005 - 2019) updates and support as nobody else !

  34. #114
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova

    Infinity Chinese Miracle II SCR/SPD-RDA v1.04: New models and features

    Infinity Chinese Miracle II SCR/SPD-RDA v1.04: New models and features

    Supported CPU list:
    Spreadtrum : SC6530, SC6531, SC6531(A/C/D)
    UniSoc : SC6531E, SC6533, SC6533G
    RDA Mirco : RDA8851 rev A,B,C,L,CL
    RDA Micro : RDA8826

    RDA Mirco RDA8851 rev A,B,C,L,CL
    RDA Micro RDA8826
    Spreadtrum SC6533/G :
    Flashing protocol updated
    BOOTROM mode support revised
    Updated LOD tools ( flashing / customizing )
    Repair security revised (
    -> FAC area rebuild
    -> 3rd item repair activated
    UserCode reading activated

    Spreadtrum SC6530/6531/A/C/D/E:
    Revised Repair security feature
    Flashing revised
    -> Secure/Signed lines flashing rebuild
    -> Masterimage build revised
    -> Whole flash erase fixed for NOR devices
    Internal loaders updated
    Database revised, loaders re-marked

    Spreadtrum other:
    Protocol updated, stuck issues during wrong boot selection fixed
    Improved Flashing procedure for SC7701/SC7702 devices
    Flashing customization module revised
    InternalDB/ExternalLoader detetection/selection revised






    Download link



    - How to upload files to support

  35. #115
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova

    Infinity Chinese Miracle-2 MTK/Mediatek v2.06 - AutomaticBoot selection and more...

    Infinity Chinese Miracle-2 MTK/Mediatek v2.06 - AutomaticBoot selection and other stuff

    To use this software Smart-Card firmware version should be 0137 or higher.

    Base:
    Base - Secure boot - Automatic boot selection feature released
    Base - Secure boot: Allow automatic detect boot configuration for SECURE enabled chips
    Base - Secure boot: Following secure configurations are supported: SBC, SLA, SDA and their combinations
    Base - Secure boot: Following secure configurations are NOT supported: ARB and combinations with it
    Base - Secure boot: Supported CPU: MT6572, MT6580, MT6582, MT6589, MT6592, MT6735, MT6752, MT6753, MT6755, MT6757, MT6763, MT6771, MT8127, MT8135, MT8167 ( list of tested )

    Base - ModelBD - Manual Model DB update feature released
    Base - ModelBD: Allow save boot configuration in sw database for future use

    Base - ModelBD - Automatic Model DB update feature released
    Base - ModelBD: Allow save boot configuration in sw database for future use ( press and hold LCTRL key during press IDENTIFY )

    Base - FlashLoader line v1904 tested and supported. Older lines (6592/6595 and similar) still unstable
    Base - FlashLoader line v1912 tested and supported. Older lines (6592/6595 and similar) still unstable

    FWFlasher:
    FWFlasher - Flash core updated
    FWFlasher - SecureFlash on Legacy phones revised
    FWFlasher - MT6771/6765 support revised

    FWReader:
    FWReader - More types supported for safe read
    FWReader - Info reading improved
    FWReader - packing revised
    FWReader - more accurate data verification

    Service:
    Service - Format FS revised
    Service - NVRAM module updated

    Platform:
    Platform - MT6765/MT6762 support optimized

    Loaders:
    LoaderDB - Lot of new agents included (Tecno, Tesla, Wiko and other)
    LoaderDB - Included MT6570 "DRAM Fixed" agents used to revive devices flashed with wrong preloader ( so called "Doogee X10 bug" )

    Other:
    Other - Many different small changes and fixes
    Other - SaveUser Configuration option can be found in FILE system menu. Work only in MANUAL mode !
    Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
    Other - Preloader tools, Preloader init and other related stuff updated
    Other - Partial LEGACY NAND support - optimized boot. Identify work complete if BMT autoset work correct

    Info: Automatic Boot option can be switched off/on in settings menu
    Info: Automatic Boot work in "SelfLearning" mode - once learned it will boot this type/device line after automatically
    Info: Automatic Boot option support and learn different modes ! Make sure if device used DIFFERENT settings - learn all of them !
    Info: MT6570 Fixed NAND DA can be used for flashing FACTORY firmware and INIT PRELOADER. For FW read and all other things - use INFINITY ones !

    How to use AutomaticBoot select, User DB, Auto DB


    Download link #1

    Download link #2

    Download link #3




    - How to upload files to support

    Infinity-Box 14 years (2005 - 2019) updates and support as nobody else !

  36. #116
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova

    Infinity Chinese Miracle-2 SPD/UniSoc - CM2SP2 - v2.00 r1 released

    Infinity Chinese Miracle-2 SPD/UniSoc - CM2SP2 - v2.00 r1 released

    - Supported platforms:
    SpreadTrum:
    SC5735
    SC7715
    SC7731C, SC7731G
    SC9820
    SC9832A
    SC9850
    SC9853i

    UniSoC:
    SC9820E
    SC7731E
    SC9832E
    SC9850K
    SC9850KH
    SC9863

    - Support Generic (Non-Secure), SecureV1, SecureV2 devices
    Android 4/5/6/7/8 versions

    - Supported operations in initial release:
    Identify ( include complete device info )
    Reset Settings / Format FS
    Reset FRP
    Firmware flashing ( Safe Flash, Repartition, HW verify, Flash customizing )

    - Database:
    Basic wide-range bootloaders for common devices types
    Also lot of other pre-defined models already included in database

    - Extra:
    Feature: Completely safe flash engine ( allow flash SimLock / Signed / and other devices, recover critical data from semi-damaged NV )
    Feature: Automatic ModelDB update at new model detection ( loader select, pac load etc. )
    Feature: Customized boot option and sources: Manual PAC, Manual FDL pair with automatic details detection, Pre-defined DB, Self-Learning DB
    Feature: Complete Firmware Info detection at FW load with extended info




    Download link




    - How to upload files to support

    Infinity-Box 14 years (2005 - 2019) updates and support as nobody else !

  37. #117
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova

    Infinity Chinese Miracle-2 SPD/UniSoc v2.01 - UniReader Edition - Android 4-5-6-7-8-9

    Infinity Chinese Miracle-2 SPD/UniSoc v2.01 - UniReader Edition - Android 4-5-6-7-8-9

    As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.

    - Core
    Protocol updated
    Alternate protocol support activated ( automatic switch depends on model )

    - New Self-Learning engine for semi-supported devices !
    In case of problem with device servicing - during identify session SW will make new database record
    That record available from boot menu after that to use exactly for this device line
    That will fix any incompatibility loader <-> device problems and remove any servicing issues

    - Service
    Identify - better structure detection, simlock state info
    Identify - Userdata state detection optimized
    Format FS - Forced Format revised

    - Flasher
    Optimized PAC handling
    Optimized older device line support ( Sc7715-Sc9832 from SPRD )
    NVManager updated - Identify, Security swap and verification, Recovery mode
    Activated flashing of own FlashFile format files made by FWReader

    - Firmware Reader activated!
    Allow read ANY security level phone from Spreadtrum or UniSoc on almost all Android OS versions!

    Support OLD SPRD line devices:
    SC7715, SC7731, SC9820, SC9832, SC9850 and their revisions and modifications
    Plain, Signed and RSA-enabled
    Android 4, Android 5, Android 6, Android 7 lines are supported (higher versions were NOT released from SPRD)

    Support NEW UniSoc line devices:
    SC7731E,SC9832E,SC9863,SC9850,SC9820E and their revisions and modifications
    Plain, Signed and RSA-enabled
    Android 6, Android 7, Android 8, Android 9 lines are supported (lower versions were NOT released from UniSoc)
    Arch32/Arch64 support

    Support "SPRD"-like chipsets with Intel X86 arch
    SC9853I and its modifications and revisions
    Plain, Signed and RSA-enabled
    Android 6, Android 7, Android 8 lines are supported

    It is the only existing and complete solution

    Additional info:
    Firmware use OWN format.
    Firmware is COMPLETE one, allow to fix any sw-related state including FlashChip erase, change or complete SW rebuild
    Unlike older SWReader version used in V1 line there is no need in bunch of additional re-connection operations or to make something special.

    - Database:
    New generic boots included, some boots updated

    - Other
    Bug fixes and some changes according users requests

    - Known issues:
    [1] UniSoc line is SLOW. It is VERY SLOW! Unlike SPRD ones, it consume x4-x5-x6 more time comparing to old SPRD.
    We made almost all possible for now to speed it up. And that is limit for protocol.
    In near time it should be some speed up to 20-30% but this solution still require some more time.
    [2] UniSoc devices with ARB active may dead on wrong SW version flashing at Android 9 line.
    We checking that issue and collecting samples. According users test and reports solution will follow.
    [3] Some old devices after FW flashing may gone to "Encryption Unsuccessfull" state, right now - "ResetPhone" button enough.
    [4] Sw will try always, in any case retrieve all device-side keys/security during flashing and identify, if they exists inside.
    Much backups better, that nothing. Actual for devices with paired/signed security and/or active keybox.
    [5] NAND devices on SC9820,SC7715,SC8830 not supported yet for FW reading


    Password for archive file (if any) is: 12345678

    Download link #1
    Download link #2
    Download link #3
    Download link #4
    Download link #5




    - How to upload files to support

    Infinity-Box 14 years (2005 - 2019) updates and support as nobody else !

  38. #118
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova

    Infinity Chinese Miracle II SCR/SPD-RDA v1.05 - New models and features

    Infinity Chinese Miracle II SCR/SPD-RDA v1.05 - New models and features



    As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.


    Supported CPU list:

    Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
    UniSoc: SC6531E, SC6533, SC6533G
    RDA Mirco: RDA8851 rev A,B,C,L,CL
    RDA Micro: RDA8826

    RDA Mirco RDA8851 rev A,B,C,L,CL
    RDA Micro RDA8826
    Spreadtrum SC6533/G:

    Updated LOD tools ( Factory LOD support revised )
    UserCode reading improved

    Spreadtrum/UniSoc SC6530/6531/A/C/D/E:

    New feature activated: Complete identification
    During Binary Dump selection SW will extract complete device info ( build version, time, HW details etc. )
    During PAC file selection SW will extract complete device info ( build version, time, HW details etc. )
    During Flash Reading SW will extract complete device info ( build version, time, HW details etc. )
    Readout naming changed to DeviceInfo details instead of flash size/flash vendor

    Repair security revised
    Database revised, loaders updated ( extended range of supported SC6531EFM devices with 4-8MB flash )

    Spreadtrum/UniSoc other:
    Protocol updated, error codes handling activated
    SC6531 with 16MB flash support revised
    FTM during flashing now make DNVM clean, FS clean and structure verification
    UserCode reading improved
    Some other bugfixes and small changes

    Info:
    "HardLock" detection feature for SP-locked device activated under test

    We are looking for SP-locked samples RDA Micro / UniSoc / SPDR FP platforms. Please contact to rd [at] infinity-box.com if you have units for test on hands.




    Password for archive file (if any) is: 12345678


    Download link #1
    Download link #2



    - How to upload files to support

    Infinity-Box 14 years (2005 - 2019) updates and support as nobody else !

  39. #119
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova

    Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and more

    Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and features

    As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.

    - Core
    Protocol updated
    Error handling, error explanation and hint module activated
    SC9850 and similar devices WRITEFLASH security disable option enabled
    > Use for custom / forced / service operation on secure-enabled SC9850 phones (in case of "AC SECURITY" error)

    - Android 9 line devices tested and supported for Firmware reading!
    - Self-Learning mode for Firmware Reader activated!
    That feature allow analyze new and unknown devices "on the fly" and make complete and correct firmware
    Just follow the SW instructions if need and you don't need to wait updates for latest devices

    - Service
    Security - NVM reading feature activated
    > Allow read complete device factory calibration data, security items
    > Save also modem info for cross-writing NV between different models
    Security - NVM writing feature activated
    > Allow restore / rewrite device factory calibration data, security items
    > Allow use different modes during restore:
    > 1. SWAP ( safe mode ) - if security alive SW will try swap security data
    > 2. Complete restore ( rebuild mode ) - destroy ALL original security data if it was inside phone
    Identify - better structure detection
    Identify - BaseBand deep identification
    > Allow read complete BaseBand info and read "MODEM TAG"
    > Since nowdays there much SAME devices under DIFFERENT names but same by RADIO part - you may use NVM according that TAG
    > TAG now saved during NVM read operation, you can use default Windows search bar in Backup folder to seek need TAG
    UserData - PrivacyLock read feature activated
    > Allow read PRIVACY lock password and details
    > Support DIFFERENT models made by OEM "TRANSSION"

    - Flasher
    Optimized speed ( from 5% to 15% for UniSoc line )
    Optimized PAC handling
    Optimized older device line support ( SC7731GEA and similar from SPRD )
    NVManager updated - Identify, Backup, Security swap, Verification
    Activated new option - Re-Sparse.
    > Allow prepare big filesystem images before flash. Useful for low-ram devices and adnroid 9 devices
    > Use that option, if have face "INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!" error during SYSTEM flashing

    - Firmware Reader
    Android 9 line support finished, completely tested and confirmead as working
    Vendor-specific mode activated. SW will identify "non-standard" devices and make firmware complete and correct now
    > FOTA, vendor-specific features and rest stuff has been tested

    - Database:
    New generic boots included for SC7731C/G
    New generic boots included for SC9863
    ZTE lines devices included - A5(2019), A7(2019), L130, L8 and some others

    - Other
    Bug fixes and some changes according users requests

    - Known issues :
    [1] UniSoc line is SLOW. It is VERY SLOW! It may takes up to 3-4 times more time comparing with old SPRD.
    [2] UniSoc devices with ARB active may dbe ead on wrong SW version flashing at Android 9 line.
    We are checking that issue and collecting samples. According to users test and reports solution will follow.
    [3] Some old devices after FW flashing may gone to "Encryption Unsuccessfull" state, right now - "ResetPhone" button enough.
    [4] UniProt option active may lead to FLASHING problems on old SC7715-SC7731 line devices. Disable this option if you have a problem with old SPRD
    [5] NAND devices on SC9820, SC7715, SC8830 are not supported yet for FW reading


    Download link #1

    Download link #2




    How to upload files to support

    Infinity-Box 14 years (2005 - 2019) updates and support as nobody else !

  40. #120
    Balkan GSM Team dojran's Avatar
    Clan br.
    53
    Registrovan
    Sep 2005
    Lokacija
    Tuzla FNRJ
    Godina
    52
    Br. postova
    1.268
    Hvala
    158
    Pohvaljen 207 puta u 107 postova

    Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features

    Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features

    As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.

    - Core
    Protocol updated
    Error handling, error explanation and hint module updated

    - Service
    NVM operations revized
    DiagMode option activated ( Platform -> Control -> DiagMode )
    > Change SW mode to diag, instead of flash. Do not require BootSelection.
    Allow for now:
    1. Identify Device - ModemInfo, Build Info, SecurityInfo, SOC Info, DeviceHW Info
    2. Format FS / Reset settings ( NOT touch FRP! ) - WIPE mode
    3. Read NV data, verify NV
    > Don't forget change SW mode between Service/Flash for those operations !

    New Identify option - device Platform, Device HW details identification
    > Allow detect device SOC family, RAM amount for faster loader selection
    > Work in DiagMode, Work ON MODERN and UNISOC chipset only !

    - Flasher
    Optimized flashing protocol
    Optimized older device line support
    NVManager updated - Identify, Backup, Security swap
    NVManager Recovery tool updated

    - Firmware Reader
    Optimized structure identification
    Activated "forced" reading. Option skip data verification.
    > In case of semi-damaged devices, if backup atleast of something required
    > In case of "Critical data damaged" errors
    Optimized data verification during create FW

    - Database:
    SC983xx generic loader DB updated
    SC9853i generic loader DB updated
    SC7731E generic loader DB updated
    SC7731x generic loader DB updated
    SC9863 loaders DB updated - BQ, Wiko, ZTE, Symphony
    SC7731c/g loaders DB updated - various models and RAM size
    SC9832E loaders DB updated - Meizu, Wiko
    Some other various models with specific hw settings included in loader DB

    - Other
    Boot Selection mode are indepedent ( loader base can be changed after FW selection, in Platform tab )
    Bug fixes and changes according users requests

    - Special thanks to respected Mr. gracy_elec


    Download link




    - How to upload files to support

    Infinity-Box 14 years (2005 - 2019) updates and support as nobody else !

Strana 3 od 3 PrviPrvi 123

Slicne teme

  1. ChineseMiracle v2.77 released
    Postovao Decoder u forumu Infinity
    Odgovori: 1
    Zadnji post: 14-02-09, 04:04
  2. Infinity-Box ChineseMiracle v2.76 released
    Postovao Decoder u forumu Infinity
    Odgovori: 1
    Zadnji post: 02-02-09, 00:30
  3. ChineseMiracle v2.75 released
    Postovao Eprom u forumu Infinity
    Odgovori: 0
    Zadnji post: 21-01-09, 17:39
  4. "ChineseMiracle" v2.72 released
    Postovao Eprom u forumu Infinity
    Odgovori: 1
    Zadnji post: 27-12-08, 11:24
  5. Infinity-Box: Spice, Alcatel, PinFinder, ChineseMiracle updated
    Postovao Infinity-box u forumu Infinity
    Odgovori: 1
    Zadnji post: 10-11-08, 13:10

Pravila postovanja

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •