Prikazivanje rezultata 1 do 5 od 5

Tema: flesiranje f510

  1. #1
    GSM Senior digital's Avatar
    Clan br.
    443
    Registrovan
    Nov 2005
    Lokacija
    DragonBall
    Godina
    45
    Br. postova
    75
    Hvala
    0
    Pohvaljen 0 puta u 0 postova

    flesiranje f510

    Da li je neko flesirao f510 preko hwk i koja je procedura, kako u download mode? takodje ako neko ima tutorijal za flesiranje preko downloadera
    [VISTA]U-Medic_v1.3.3.exe.pozdrav

  2. #2
    GSM Junior
    Clan br.
    1937
    Registrovan
    Aug 2006
    Lokacija
    krag
    Godina
    43
    Br. postova
    28
    Hvala
    9
    Pohvaljen 1 put u 1 postu
    javi mi se na pm da ti objasnim

  3. #3
    GSM Senior digital's Avatar
    Clan br.
    443
    Registrovan
    Nov 2005
    Lokacija
    DragonBall
    Godina
    45
    Br. postova
    75
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    ako mi ti pomognes ja idem u pm...

  4. #4
    Balkan GSM Team Code Electronic's Avatar
    Clan br.
    295
    Registrovan
    Nov 2005
    Lokacija
    Code Support
    Br. postova
    583
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    How_to_Download_F510

    - Connect the USB [PCB200BBE] cable to USB port on your PC.
    - Connect the other part to F500
    - Before you started this set-up procedure, you have to save a SAMSUNG USB Drivers in your PC first and install CDMA modem.

    2.0 Setting & Downloading
    – Before Download, must do DB&NAND FORMAT by *#62367# in idle mode.
    – Power off
    – Press “4” then “End” Key for into download mode.
    – Connect the cable to F500 while download mode.
    (You’ll see ‘USB DOWNLOAD SAMSUNG UMTS’ message on the LCD of F500)

    – Connect USB cable (PCB200BBE) for F500 to USB port on your PC.
    – Connect the other part to F500.
    – Actually F500 download procedure is divided two part (CP and AP part).
    – Download CP part first and then separately AP part next. Please remand this for safety download.
    – Run SGH-F500 downloader ([VISTA]U-Medic_v1.3.3) application as below. (This is included S/W version)

    CP part download.
    1. This is used to manage properties of USB Downloader with a setting file.
    • 'default.mdc' is created as a default.

    2. CP Part
    • Tick Erase NAND, Change Boot Area, Code, Resource
    • Code : select F500XXGC2 > CP Binary > build > ms > bin > VIS_SEC
    • Resource : select F500XXGC2 > CP Binary > APPResource > TFS4_Resources > SECUMTS_rsc.bin
    3. AP Part
    • Tick SPL
    • SPL : select F500XXGC2 - AP Binary - APUNION.bin
    • Don’t tick COD, FNT and FS.

    4. Download.
    • Downloader can search USB ports connected automatically if 'Auto' is checked.
    • If it automatically finds correct COM port, click Download then will be started CP download.
    • After finish the downloading. You can see “Download Complete” message.

    AP part download.
    1. After finished CP download then press “4” then “End” Key for download mode again

    2. CP Part
    • Tick Resource only.
    • Resource : select F500XXGC2 > CP Binary > APPResource > TFS4_Resources > SECUMTS_rsc.bin

    3. AP Part
    • Tick SPL, COD, FNT and FS
    • SPL/COD/FNT : select F500XXGC2 - AP Binary - APUNION.bin
    • FS : F500XXGC2 - AP Binary - FSUNION.bin

    4. Download.
    • Downloader can search USB ports connected automatically if 'Auto' is checked.
    • If it automatically finds correct COM port, click Download then will be started CP download.
    • After finish the downloading. You can see “Download Complete” message.
    • F500 will be power on automatically.

    4.0 Phone reset
    Phone automatically resets itself after downloading if not you need to reset by manual as below:
    - Custom reset by *2767*2878#
    - FP by *#01010522# and then select country.
    - DB format by *#32367#
    - DB&NAND Format by *#62367#

  5. #5
    GSM Senior digital's Avatar
    Clan br.
    443
    Registrovan
    Nov 2005
    Lokacija
    DragonBall
    Godina
    45
    Br. postova
    75
    Hvala
    0
    Pohvaljen 0 puta u 0 postova
    @code electronic hvala na manualu, uspesno odradjen po istoj proceduri

Slicne teme

  1. kp 235 flesiranje
    Postovao gsmarko u forumu Vygis Toolbox
    Odgovori: 2
    Zadnji post: 13-05-08, 17:02

Pravila postovanja

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •