Prikazivanje rezultata 1 do 15 od 15

Tema: problem

  1. #1
    GSM Guru
    Clan br.
    11178
    Registrovan
    May 2008
    Lokacija
    ZAGREB
    Godina
    33
    Br. postova
    168
    Hvala
    3
    Pohvaljen 1 put u 1 postu

    problem

    v0.914041/UNI
    CARD SERIAL: 00046552
    Loaded 51 flash descriptors
    SIGNED MODE (USING SERVER).
    ALTERNATIVE SECURITY BYPASS ENABLED.
    llbug: port 2 open error: "The system cannot find the file specified"
    Can't load ID loader !
    Elapsed: 0 secs.
    SIGNED MODE (USING SERVER).
    ALTERNATIVE SECURITY BYPASS ENABLED.
    Open COM port OK
    Can't load ID loader !
    PROCEDURE WAS STOPPED BY USER
    Elapsed: 4 secs.
    SIGNED MODE (USING SERVER).
    ALTERNATIVE SECURITY BYPASS ENABLED.
    ChipID:9900,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    Flash ID check:897E
    Flash props sent ok
    OTP LOCKED:1 CID:51 PAF:1 IMEI:35344702113419 CERT:RED
    FLASH CID:52 COLOR:RED

    Model:S500i
    Brand:Sony Ericsson
    MAPP CXC article: R8BE001 prgCXC1123326_GENERIC_LY
    MAPP CXC version: R8BE001
    Language Package:S_E_EUROPE
    CDA article: CDA102568/3
    CDA version: R9A
    Default article: cxc1123328
    Default version: R8BE001
    PROVIDER: 000-00
    Network LOCKED

    RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

    BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

    SECURITY UNITS BACKUP CREATED.
    Elapsed: 11 secs.
    SIGNED MODE (USING SERVER).
    ALTERNATIVE SECURITY BYPASS ENABLED.
    PRELOADER SECURITY BYPASS ENABLED.
    ChipID:9900,EMP protocol:0301

    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:52
    Speed:921600
    OTP LOCKED:1 CID:51 PAF:1 IMEI:35344702113419 CERT:RED
    FLASH CID:52 COLOR:RED
    PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
    LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    Flash ID check:897E
    Flash props sent ok
    LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
    loader startup: executed
    loader GDFS startup: executed
    loader filesystem startup: executed
    loader unlock: executed

    DISCONNECT PHONE NOW
    INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
    BE SURE THAT YOU SET PHONE IN "PHONE MODE"
    IF ASKED, INSTALL PHONE DRIVERS

    SEARCHING FOR PHONE, "STOP" TO ABORT
    llbug: port 263 open error: "The system cannot find the file specified"
    Can't open COM263(0)
    llbug: port 264 open error: "The system cannot find the file specified"
    Can't open COM264(0)
    llbug: port 265 open error: "The system cannot find the file specified"
    Can't open COM265(0)
    llbug: port 266 open error: "The system cannot find the file specified"
    Can't open COM266(0)
    llbug: port 263 open error: "The system cannot find the file specified"
    Can't open COM263(0)
    llbug: port 264 open error: "The system cannot find the file specified"
    Can't open COM264(0)
    llbug: port 265 open error: "The system cannot find the file specified"
    Can't open COM265(0)
    llbug: port 266 open error: "The system cannot find the file specified"
    Can't open COM266(0)
    Can't find attached phone with IMEI 35344702113419
    PROCEDURE WAS STOPPED BY USER
    Elapsed: 110 secs.

    prolazilo mi je otkljucavanje inace normalno i sad odjednom izbaciva ovo u nedogled.
    promjenim u device menageru port i dalje isto
    moze pomoc?

  2. #2
    GSM Master Luc+Luc's Avatar
    Clan br.
    1599
    Registrovan
    Jun 2006
    Lokacija
    B i H, Kiseljak - Wine
    Godina
    36
    Br. postova
    636
    Hvala
    5
    Pohvaljen 2 puta u 2 postova
    Malo search na ovom forumu i naci ces...
    Izmenio Luc+Luc : 06-11-08 u 14:29

  3. #3
    GSM Master novack2's Avatar
    Clan br.
    380
    Registrovan
    Nov 2005
    Lokacija
    Crvena Rijeka
    Godina
    49
    Br. postova
    593
    Hvala
    34
    Pohvaljen 32 puta u 14 postova
    bem ti misa, da si bio u Dubrovniku na skupu nebi ti se to dogodilo,,,,bas smo o tome imali predavanje teoretsko i prakticno,koliko se sjecam,moras box nakaciti na onaj prednji USB port,a na njegovo mjesto ustekas USB kabel od telefona. Eto, 3 minute posla i gotovo.

  4. #4
    GSM Guru
    Clan br.
    11178
    Registrovan
    May 2008
    Lokacija
    ZAGREB
    Godina
    33
    Br. postova
    168
    Hvala
    3
    Pohvaljen 1 put u 1 postu
    Ove zamjene portova nije pomogla. Jos gore(sad kad dode do dijela kad tazi port, pocne se blesirat a da mu jos nisam ni okacio telefon)
    sad se idem bacit na prvu sugestiju luc luca.

  5. #5
    GSM Expert Dr SEMA's Avatar
    Clan br.
    66
    Registrovan
    Sep 2005
    Lokacija
    KANDAHAR
    Br. postova
    2.528
    Hvala
    197
    Pohvaljen 659 puta u 314 postova
    @cimpa10
    đes lave ša mai???
    ti obeća doći u Dubrovnik al te nismo vidjeli ili sise zamaskirao u čemu je frka,što se nisi pojavio

  6. #6
    GSM Guru
    Clan br.
    11178
    Registrovan
    May 2008
    Lokacija
    ZAGREB
    Godina
    33
    Br. postova
    168
    Hvala
    3
    Pohvaljen 1 put u 1 postu
    jel vi to mene zaj%%%%?
    kakvo obecanje?
    jel ima rade netko da mi pomogne oko problema navedenog gore.
    ili eka smjernica.
    na ovom forumu nemrem nista naci

  7. #7
    GSM Master grec's Avatar
    Clan br.
    1760
    Registrovan
    Jul 2006
    Lokacija
    Republika Srpska, brod
    Godina
    33
    Br. postova
    280
    Hvala
    35
    Pohvaljen 12 puta u 8 postova
    koji ce ti %%%%% uopste, pokreni executor......... kad se ugasi telefon otidji
    u settings i prikaci enable preloader........ klikni na unlock i eto !!

    kome jos treba 200 %%%%nih instaliranih com portova na racunaru ??

  8. #8
    Product Supporter scorpy's Avatar
    Clan br.
    334
    Registrovan
    Nov 2005
    Lokacija
    Becej
    Godina
    42
    Br. postova
    401
    Hvala
    158
    Pohvaljen 45 puta u 25 postova
    Windows XP podrzava ukupno 256 COM portova, a ti izgleda imas viska
    Pretrazi malo forum, ima jedan *.reg file da to popravis

  9. #9
    GSM Master josip luic's Avatar
    Clan br.
    4814
    Registrovan
    Apr 2007
    Lokacija
    karlovac
    Godina
    45
    Br. postova
    677
    Hvala
    4
    Pohvaljen 8 puta u 7 postova
    ja sve aparate radim kako je grec naveo..puno je brže..

  10. #10
    GSM Guru
    Clan br.
    11178
    Registrovan
    May 2008
    Lokacija
    ZAGREB
    Godina
    33
    Br. postova
    168
    Hvala
    3
    Pohvaljen 1 put u 1 postu
    Kak ide tocno procedura ovog drugog nacina otkljucavanja, dok ne
    uspijem srediti ove portove?od musterije mi je, a trebam ga otljucat do sutra(k 800,cid53).
    Hvala

  11. #11
    GSM Master josip luic's Avatar
    Clan br.
    4814
    Registrovan
    Apr 2007
    Lokacija
    karlovac
    Godina
    45
    Br. postova
    677
    Hvala
    4
    Pohvaljen 8 puta u 7 postova
    u setingsu označi prve tri stavke,unlock,traži te drivere,stisni stop,u setingsu samo treća stavka označena,aparat upališ i pokreneš egzekutor koji ubije aparat,unlock i to je to..nakon toga naravno obriši executor

  12. #12
    GSM Expert Damir_MKD's Avatar
    Clan br.
    7863
    Registrovan
    Sep 2007
    Lokacija
    Kicevo,R.Makedonija
    Godina
    40
    Br. postova
    837
    Hvala
    152
    Pohvaljen 208 puta u 120 postova
    Citiram Original postovao CIMPA10 Pogledaj post
    jel vi to mene zaj%%%%?
    kakvo obecanje?
    jel ima rade netko da mi pomogne oko problema navedenog gore.
    ili eka smjernica.
    na ovom forumu nemrem nista naci
    http://www.gsmserbia.com/forum/showthread.php?t=23340
    http://www.gsmserbia.com/forum/showp...1&postcount=37

    koristi *

  13. #13
    GSM Master novack2's Avatar
    Clan br.
    380
    Registrovan
    Nov 2005
    Lokacija
    Crvena Rijeka
    Godina
    49
    Br. postova
    593
    Hvala
    34
    Pohvaljen 32 puta u 14 postova
    Citiram Original postovao josip luic Pogledaj post
    u setingsu označi prve tri stavke,unlock,traži te drivere,stisni stop,u setingsu samo treća stavka označena,aparat upališ i pokreneš egzekutor koji ubije aparat,unlock i to je to..nakon toga naravno obriši executor

    @Jozef

    covjeku sa tolikim velikim predznanjem o servisu mobitela nije bas uredu savjetovati da ubije telefon,,,,daj probaj mu objasniti to malo ljepsim rijenikom.
    Tko zna dali ce ga znati ozivjeti poslije? Ili kasnije mozemo citati novi naslov......Kako da ozivim ubijeni SE!

  14. #14
    GSM Guru
    Clan br.
    11178
    Registrovan
    May 2008
    Lokacija
    ZAGREB
    Godina
    33
    Br. postova
    168
    Hvala
    3
    Pohvaljen 1 put u 1 postu
    Hvala. Proslo je ok.
    Ovo je malo cisci nacin bez j%%%%% portova

  15. #15
    GSM Guru
    Clan br.
    11178
    Registrovan
    May 2008
    Lokacija
    ZAGREB
    Godina
    33
    Br. postova
    168
    Hvala
    3
    Pohvaljen 1 put u 1 postu
    Citiram Original postovao novack2 Pogledaj post
    @jozef

    covjeku sa tolikim velikim predznanjem o servisu mobitela nije bas uredu savjetovati da ubije telefon,,,,daj probaj mu objasniti to malo ljepsim rijenikom.
    Tko zna dali ce ga znati ozivjeti poslije? Ili kasnije mozemo citati novi naslov......kako da ozivim ubijeni se!
    covjek mi je lijepo napisao tocno sto sam ga pitao.
    I na tomu sam mu zahvalan

Slicne teme

  1. D800 kamera problem
    Postovao vilim u forumu M46 i starije serije
    Odgovori: 14
    Zadnji post: 04-01-08, 18:45
  2. Unlock 6630 Problem
    Postovao Alen-CH u forumu BB5 modeli
    Odgovori: 12
    Zadnji post: 24-10-07, 20:32
  3. sure the problem is in box
    Postovao Wildjoker u forumu J.A.F.
    Odgovori: 11
    Zadnji post: 25-09-07, 17:34
  4. problem with new dongle
    Postovao sorinm u forumu J.A.F.
    Odgovori: 16
    Zadnji post: 10-07-07, 23:15
  5. V3 cudan problem
    Postovao basar u forumu Motorola HW sekcija
    Odgovori: 4
    Zadnji post: 26-12-05, 06:20

Pravila postovanja

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •