2007-01-19

change - Added the repair function for С115 ,C116 ,C117 ,C118 ,C138 ,C139 ,C155 ,C156 ,C157 ,V170 models with the erased boot zone.

To repair the phone you need to cut the track.
ATTENTION: You will not be able to power on the phone with the track cut! To avoid soldering the track there is the "Solder ODM track" button, which can emulate the soldered track.
ATTENTION: You will need to use the "Solder ODM track" function every time you change the firmware of the phone.

To repair a "dead" phone you need to do the following:

1) Disassemble the phone and cut the track as shown on the picture (To cut the track there is no need to take out the shield, track visible from one of the factory holes on the shield).
2) Assemble the phone and connect the battery then choose your exact model and press "Repair Bootcore" button.
3) After the operation has been successfully finished remove and put back the battery. You can now flash the phone with any flash file from our support area. After the phone has been flashed it will power on automatically, but if you turn it off it will not power on again. To power on the phone use the "Solder ODM track" function.

2007-01-15
New version (MStool 7r) uploaded! Download it from support area.
• change - W220 unlocking mechanism has changed.
• change - Backup reading has been changed. You can now read different FLASH parts like PDS, boot core, language pack, etc. (Some features like reading language pack and flex are not available on some flash versions at the moment).
Supported versions are: R47A, R374, R44419, R4512, R4513, R4515, R4527, R252B, R4517, R252211LD.
You do not need a test point for reading flash zones but TP mode might be required for reading of PDS and DEBUG zones.

2006-12-27

New version uploaded MStool_6r uploaded! Download it from support area.

change - added support for MPX200, V690, V872, V878, W220, K1(repair), Z3 (repair)
change - auto write programm log to txt file mstool.log
bugfix - on some shx super files "CODE SIGN ERROR" appears. fixed

2006-12-06

New version uploaded MStool_5r uploaded! Download it from support area.

critical bugfix - Unlock for LTE & LTE2 phones with 0020880Е flash chip (micron) was broken, which resulted:
- phones was not unlocked after unlocking process.
- when repair "Failure reported. Error code:FF" error appears.
change - added full support for V3im Itunes phone (R47A) (flash, unlock, repair). All existing language packs uploaded to support area.
bugfix - periodic program quits, crashes, Access Violation errors after first MStool start. fixed.
bugfix - added missed support for 002088С5 flash (c650 related).
bugfix - interface bugfixes. missed pictures added.

2006-11-30
Due to a lot of customer requests download limit increased to 10 files daily.

2006-11-30
New version MStool_4r uploaded! Download it from the Downloads section.
• change - Motorola a668 support added (flash, unlock)
• bugfix - fixed "error write problem" on c261/c257 phones.
• change - made some additions for flashing system. with this version you can only flash 1 file. Will be fully done in next version.

2006-11-28

New version uploaded MStool_3r uploaded! Download it from support area.
• change - added PDS repair for e398, c975 micron, v980 intel, c980 micron, v3x, v220, e1000, v1050, e1150, e770
• change - new version of execryptor. fixed "not-opening" problem on some systems.
• bugfix - added missed PDS repair for triplets (v300, v500, v600), pls note you have to use simple cable without "auto flash mode"
• bugfix - repair for L6/L7 phones was broken. fixed
• bugfix - error which brokes unlock of POG phones found. fixed
• bugfix - software hanged after POG unlock. fixed
• change - Algorithm for unlocking of the C975/V980/V975/C980/E1000/V1050 phone group with Intel and Micron flashes has been fixed (but not fully finished due to lack of phone models):
1) Normal flash mode (Boot core up to 5.F.1 version)
2) Downgrade (Boot core up to 6.3.1)
3) Test point


Kao sto mozete vidjeti pred nama je vise puta update-ovan Motorola software koji je da kazemo odbolovao 'djecije boginje' .
Jedina mana za sada je obavezna upotreba test-pointa za vecinu podrzanih modela.
Naravno, kao sto vidite, programeri MSTool-a rade na novim update-ima i blizi se dan kad ce MSTool zauzeti jedno od prva dva mjesta sto se tice kvaliteta/lakoce odradjivanja Motorola aparata.
MSTool je jedini software za Motorola aparate koji podrzava sve platforme telefona koje nose 'Motorola' oznaku.
Znaci sve od 'klasicnih' P2K Motorola tipa A732, A668, C380, C381, C384, C385, C650, C651, C975,E1070, E390, E398B, E550, E770v, E790,L2, L6, L7,V1150, V175, V176, V177, V80, V180, V185, V188, V190, V191, V220, V220i, V226, V280, V300, V360, V360v, V361, V3, V3m, V3x, V500, V525, V535, V550, V600, V600i, V620, V8, V975, V980m, Z3, K1... pa preko ODM/Compal Motorola tipa С115 ,C116 ,C117 ,C118 ,C138 ,C139 ,C155 ,C156 ,C157 ,V170... pa sve do najnovijih C261, C257, V177, W220 .
Izuzetna stvar kod MSTool-a je jezicka podrska(naravno ima i srpski i hrvatski) za ove ODM Motorole koja je instantna.

Cijena aktivacije za SETOOL korisnike je samo 85,00e
*Nakon uplate aktivaciju vaseg SETOOL dongla za rad sa MSTool-om necete cekati duze od 24-48h
*Obicno je potrebno svega par sati

Kontakt:


MobileLand D.O.O

Vladimira Rolovica F42/C , 85 000 Bar
Tel: 067 33 44 88
mail:mobileland@cg.yu , sales@setool.org
ICQ Messanger UIN: 304 271 674
Sonork Messanger UIN: 67574

GSM 3G d.o.o. P.J. BEOGRAD

Bulevar AVNOJ-a 81 L1-5, 11000 Beograd
Tel: 011 21 22 011 Mob: 065 2468 400
mail: prodajabg@company3g.com
ICQ Messanger UIN: 273-141-538

Pedja D.GARFILD
Ulica Slobode , 81 000 Podgorica
mail:m.centar@cg.yu
ICQ Messanger UIN: 293-396-949
Sonork Messanger UIN: 100.78099


GSM 3G d.o.o. P.J. NOVI SAD
Vojvodjanskih brigada 22, 21000 Novi Sad
Tel: 021 421 585, Mob: 065 476 34 26
mail: prodajans@company3g.com
ICQ Messanger UIN: 245-089-476

GSM Electronic
Mileticeva 6, 21000 Novi Sad
Tel: 064 111 82 31
mail: gsmel@gsmserbia.com
ICQ Messanger UIN: 173-555-082

Diler za Hrvatsku:

Mob Elektronik d.o.o.
Bana J.Jelacica 37
20000 Dubrovnik
mob: 098/564-947
tel: 020/416-150
ICQ: 102-937-415
mail: dalibor@gsmzone.org <mailto:dalibor@gsmzone.org>